Used Round Arch for sale (8,526)

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Kedpjwcqpnjfx Aanefa Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers Kodpsgvu Alofx Aanofa - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2009, condition: new, Bandsling Round Sling Straps Lifting Strap Load Strap 2 tons 2x 4 meters ( meter circumference) 750 pieces package price Kjdpsih N Hkjfx Aanjfa Several packages available Packed on pallet

Condition: excellent (used), Year of construction: 2015, Complete Cheese Production Line – High-Quality, Semi-Hard Cheese This fully integrated production line, including controls and electrical systems, was engineered and designed by Asepto Germany and constructed by ASTA Eisman Germany in collaboration with Schwarte. The line features Siemens S7 controls and color touchscreen HMI operation panels for precise and user-friendly operation. Installed in a factory that was not yet fully operational, the line has seen minimal use from 2015 to 2023, primarily for demonstrations, ensuring excellent condition and longevity. • Year of Manufacture: 2015 • Cheese Weight: 4–5 kg and 10–12 kg Kfjdpfx Aexnyr Heanja • Cheese Types: Semi-hard varieties, including Gouda, Edam, and similar This production line offers a ready-to-use, reliable solution for high-quality cheese manufacturing with minimal additional setup required.

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 - Electrically adjustable rear roller - Digital display for the movement of the rear roller - Hardened rollers - Conical rolling - Rotating top roller - Brake motor - Foot control Kfedpfx Aeirwlaeanea - Emergency stop - documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2025, Pick-up: 2.25 meters. Adjustable cultivator roller and fixed, self-steering gauge wheels. Chopper with 17 knives. Channel bottom with suspension for improved material flow. PowerGrip packing rollers (18 units), axle with air brakes. Flotation tires 500/60-22.5. Net binder with holder for additional roll. Transmission: 540 RPM. Price: 47,900. Kfedpfextathsx Aansa

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Ksdpfx Aaegth U Ijnofa Drum diameter: 900mm Adjustable vibration

Condition: used, Year of construction: 2025, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine Ksdpfx Aowml Dusanjfa diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: as good as new (ex-display), functionality: fully functional, stack height: 150 mm, workpiece length (max.): 364 mm, workpiece width (max.): 670 mm, No minimum price – guaranteed sale to the highest bidder! Showroom machine with extended configuration! TECHNICAL DETAILS Format and Paper Sheet size: 210 x 210 mm up to 364 x 670 mm Paper weight (standard): 81.4 to 350 g/m² Paper weight (coated): 105 to 350 g/m² Feeder stack height: 150 mm Performance and Capacity Production speed: up to 55 sheets/min Number of creasing lines: up to 20 EQUIPMENT Kfsdpew Ifbhjfx Aanja Smart Conveyor SMSL-CV Rotary creasing unit SMSL-CR8

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Kjdpfsdzqn Dex Aanofa Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: like new (used), Model: Ttsa Kodpfshmug Eox Aanjfa Description: Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

Condition: excellent (used), Year of construction: 2009, I sell the multirip saw of polish production Walter TD-500. Year 2009. Suitable for cutting round wooden logs with 2 Spindles. Kjdpfx Ajwini Eoanjfa Cutting diameter max. 350mm. Motors 30 + 22 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 10m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Rounding machine tool WemaProbst RHM 200 Kfodpfx Aev Ii Tkjanea

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. Kodpoft Ti Tofx Aanjfa The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, functionality: fully functional, Year of construction: 2025, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Kfsdpfxet Akt Ro Aanja Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm Kfedpfx Aaev Ed Svjnja - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition

Condition: new, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, roller diameter: 190 mm, - Capacity 2070 x 7 mm - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamp) Kfsdpfx Aaon Ryfwonoa - Digital display for rear roller movement - Digital display for lower roller movement (material clamp) - Hardened rollers - Tapered rollers - Swing-down upper roller - Brake motor - Emergency stop - Documentation - 400V

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Kedpfxshmzkbe Aanjfa Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: excellent (used), Year of construction: 2000, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 101758, type of input current: three-phase, Complete line of stations: sheet feeder; 2 creasing machines, also suitable for hot creasing; back drilling machine for finger ring; wire ring applicator; riveting machine for lever arch mechanism installation with large-capacity magazine for high volumes; multi-color hot stamping; turner; mechanism lever opening; vibrating system for collecting and positioning compressor bar; compressor bar insertion; compressor bar closing; insertion of corrugated cardboard protective sheet; mechanism lever closing; folding and forming of lever arch file; collection roller conveyor. Plant fully modernized with new hardware and control software in 2020. Operational plant, can be viewed on site. Total length approx. 16 m. Kedpfx Aoxfvd Tsanefa

Condition: used, Complete roundwood sorting plant / debarking line / roundwood yard, comprising: - 2-section roundwood infeed (8 chains total) - Log singulator - Infeed conveyor - Log transfer carriage - Bruks butt reducer - Crosscut saw for long logs - Transverse conveyor - Log transfer carriage - Infeed to debarker - Debarking machine CHE Johanson 660 SH - Sprecher Automation roundwood measuring SELSCAN 512 (year 2002) - Sorting line - Roundwood bins: 8 bins on the left, 8 bins on the right (with throw-over bins for long logs) - Control cabinets Kfjdpfxjxb N U Dj Aanja - Control system - Bark drag conveyor Immediately available – located in Austria near Linz

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Kedpfxjwwt Dde Aanefa Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 410 mm, roller (top) diameter: 450 mm, roller diameter: 410 mm, working width: 3,000 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 60 mm, sheet thickness copper (max.): 60 mm, overall weight: 23,000 kg, total length: 58,000 mm, total width: 21,000 mm, total height: 25,000 mm, power: 22.06 kW (29.99 HP), outer diameter: 520 mm, type of input current: three-phase, working length: 3,100 mm, Equipment: documentation/manual, model capacity 3000x40 mm Digital readout Hydraulic 4 roll plate bending machine plate thickness rolling 40 mm Kjdpfx Aaoq Uk A Tenjfa pre-bend 32 mm minimum rolling diameter ID 520 mm plate max width on the rollers 3100 mm top roll size 450 mm Power on hydraulic unit 30Hp Vac 400/50 -480/60 Installed configuration Hardened rolls Conical plate rolling with digital position bending readout Electric control joysticks roll bending Digital position readout rolling save & repeat Hydraulic rotation central rolls driven parallelism lifetime with torsion bar. ( no electronic ) Pre-pinch load adjustable for pre-bending . Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality nr.1 Vertical Support hydraulic run 3 ton capacity to support large shell dia up to 4 meters ( see photo ) ----- Predisposed ready add-on accessories: CNC controller programmable 4 axis automatic plate roll, digital touch screen readout position of the 4 rolls for use manual-semiautomatic-fully automatic programmable with storage memory, network connect predisposed industry 4.0

Condition: new, - Capacity 2070 x 6 mm - Electrically adjustable trailing roller - Electrically adjustable bottom roller (material clamping) Kjdpfx Aolht N Isanjfa - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical rolling - Rotatable top roller - Central lubrication system - Brake motor - Emergency stop - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control Ksdpsgd T R Dsfx Aansfa • Cone bending device with electronic tilting

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. Kodpfx Ajwb Scmoansfa • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs