Used Rover 23 for sale (19,056)

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,400 mm, total height: 3,170 mm, Year of construction: 1998, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC III Turntable Ladder in operational condition! ----First registration: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 h Base vehicle features: * Leaf spring suspension on rear axle * Wheelbase: 4,250 mm * Permissible gross weight: 15 t * 7-speed manual transmission * 127 l fuel tank located under rear platform * Differential lock on rear axle * Reinforced rear leaf springs and shock absorbers * Reinforced front torsion bar, stabilizer, and shock absorbers * Dual passenger seat bench * Exhaust pipe for fire service exiting before front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for passenger seats * Rear wall of cab with 2 windows * Electric window lift right side * Heated, electrically adjustable exterior mirrors with wide-angle section * Ramp mirror right side * Blue rotating beacon and Martin horn * Front blue flashers Turntable ladder superstructure features: * Metz turntable ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75 m). Max. elevation angle: 75 degrees, max. basket load: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, stabilizers: horizontal/vertical, adjustable stabilizer width between 2,400 mm and 4,500 mm * Folding rescue basket for 3 persons * 2 x 24V LED spotlights at front of rescue basket * Lifting lug at tip of lower ladder section from reinforced ladder set for lifting, lowering, and swiveling loads * Mount for portable 5 kVA generator at rotating platform * 2 x 24V/70W halogen spotlights at head of lower ladder section, teleflex-controlled from main operator station * 400V power supply protected in ladder set to tip of upper ladder incl. socket and power feed with plug for generator at rotating platform * Derivation cable from head of upper ladder to rescue basket with 1 x 400V and 2 x 230V sockets in basket * Fixed water conduit in lower ladder section * Detachable nozzle in rescue basket * Storage holder for nozzle * METZ stretcher mount SLK 111 incl. holder on platform * Compartment for stretcher storage in platform * Martin horn with 4 trumpets instead of BOSCH loud horns * Permanently installed charger 230V / 24V * Service manual available, all maintenance performed annually ----Immediately ready-to-use vehicle from first owner in well-maintained condition! New safety inspection (SP) New general inspection (HU) Non-smoking vehicle! Your contact for this vehicle: ---- Ljdpfx Aajxa Sbwjnjak Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Subject to changes, prior sale and errors!

Condition: good (used), Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves Lodpfxetxkuhe Aaneak -Milling holders: SK30 23 pieces -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 480/400/H315 mm -Total weight: 20.2 kg

Condition: used, empty load weight: 6,060 kg, maximum load weight: 28,940 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 04/2026, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, loading space volume: 23 m³, wheelbase: 4,800 mm, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, cabin, compressed air brake, * German semi-trailer * One owner * Condition: see photos * Body type: tipping trough, Meiller KISA3, type MHPS 12/27 NOSS1 * 23 m³ steel trough * Tipping angle approx. 48 degrees * Dimensions: length 7,600 mm x width 2,350 mm x height 1,400 mm * Steel standing platform with safety grating, protective railing, and access ladder, mounted on chassis frame * Stabilizing MEILLER 4-stage telescopic cylinder * SAF axles * Manual roll tarpaulin * Air-suspended, statically and dynamically balanced axle assembly, axle spacing 1,310 mm, track width 2,140 mm * Front axle with automatic lift = lifts and lowers depending on load * 2 JOST steel landing legs * Electronic braking system (EBS) * Alloy wheels * ABS * Wabco SmartBoard * Gross vehicle weight rating (GVWR) 35,000 kg / technically possible 39,000 kg * Unladen weight 6,060 kg * Payload 28,940 kg / technically possible 32,940 kg If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Lsdpjx Hi Scofx Aanoak We offer and strongly recommend inspecting and checking the goods to avoid any misunderstandings about condition and suitability on the part of the buyer. Viewing and inspection are possible at any time by prior appointment and are expressly welcome. All information is provided without warranty. We do not accept liability for mistakes or incorrect information in this offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), mileage: 71,000 km, power: 188 kW (255.61 HP), first registration: 06/1986, fuel type: diesel, empty load weight: 13,295 kg, overall weight: 14,000 kg, fuel: diesel, gearing type: mechanical, operating hours: 1,225 h, Magirus Turntable Ladder DLK 23/12, Year of manufacture: 1986. Operating hours: 1225, last inspection at 1197 operating hours (28 hours ago). Gross weight: 14 t, unladen weight: 13.295 t, swinging seat, differential lock, automatic traction chains, power steering, ABS. German registration. Mileage as per odometer. Vehicle is preferably sold to businesses or for export; private sale conditional. Sale without warranty. The above information is non-binding, subject to errors, changes and prior sale! Phone: 08026/2188 Lasdpfx Aasx Eda Ajnsk

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, Next to new nesting CNC machining center Lajdoxz Rfqjpfx Aanek 4-axis nesting CNC machining center. Purchased new in 10/2019. Has been used for less than 900 hours. The business for which the machine was acquired ceased due to the Corona pandemic, and usage has therefore been very minimal. The machine has been connected to an AL-KO extraction system, which is also for sale in a separate listing. Table size 3600x1500 mm. The machine can be used as a nesting table machine or, by removing the panel, vacuum pods can be used to raise the workpiece for machining. The machine is in full working order in all respects and is an excellent alternative to a new machine. Automatic 10-position tool changer, 2 x Busch rotary vane vacuum pumps (250 m³/h each). The work area can be divided into two separate zones. Drilling unit for vertical and horizontal drilling. Slot saw. Automatic tool height measurement (enables processing the same job with several tools without noticeable height differences). Supplied with bSolid software in Finnish. Suitable saw aggregate and planer aggregate also available for sale. The machining unit features collision sensors, so safety fencing is not required. The buyer is responsible for all costs related to relocation, including the preparation and transport of the machine (these services can be arranged, for example, through the machine's importer).

Year of construction: 2018, condition: ready for operation (used), This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. Application Types CNC Wood Machining Ledjx D Iqvopfx Aaneak

Condition: good (used), Year of construction: 1991, machine/vehicle number: 148202, Offer 25363 Technical Specifications: - Drilling capacity: 28 mm - Drill spindle taper: MK 3 - Drawbar thread: M 12 Lsdjx E Sp Ijpfx Aaneak - Drill spindle speeds – Stage 1: 120 / 215 / 360 / 600 / 1080 rpm – Stage 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height adjustable by hand crank - Minimum / maximum distance table to drill/milling spindle: 60 / 390 mm - Drill spindle stroke: 100 mm - Fine spindle feed adjustment via hand wheel - Drill spindle reach: 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: X-axis 350 mm / Y-axis 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Required space approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg

Condition: used, Year of construction: 2006, Four-sided planer Little Kuper SWT 23 XL-6 Year of construction 2006 min/max Working height 8/125 mm min/max Working width18/230 mm Working speed 6/28 m/min Spindle speed 6000 rpm Spindle diameter 40mm Laedpfx Aaexyvzuensk engines 1st. Spindle - under 5.5 kW 2nd Spindle - right 5,5kW 3rd Spindle - left 7.5kW 4th. Spindle - above 11kW 5th. Spindle - above 7.5kW 6th Spindle - under 7.5kW Main fuse 105 amp. Dimensions 7500 x 2000 x 1850 mm (L x W x H), weight 4000 kg - Year: 2006 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2025, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Ljdpfscnwydjx Aansak Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), mileage: 71,000 km, power: 188 kW (255.61 HP), first registration: 06/1986, fuel type: diesel, empty load weight: 13,295 kg, overall weight: 14,000 kg, fuel: diesel, gearing type: mechanical, operating hours: 1,225 h, Magirus Aerial Ladder DLK 23/12, Year of manufacture: 1986 Operating hours: 1225, last inspection at 1197 operating hours (28 hours ago) Gross weight: 14 t, Unladen weight: 13.295 t, Swivel seat, Differential lock, Automatic snow chains, Power steering, ABS, German registration Mileage as per odometer The vehicle is preferably sold to commercial operators or for export, sale to private individuals subject to reservation Sold without warranty The above information is non-binding; errors/changes and interim sale reserved! Phone: 08026/2188 Lajdpfx Asx Edaieansk

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Lajdpfx Aex E Ak Asanjk Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Spindle diameter: 40 mm Spindles with bearings on both sides The last two heads are equipped with jointers

Condition: used, mileage: 48,671 km, power: 174 kW (236.57 HP), first registration: 10/1992, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, loading space length: 3,800 mm, loading space width: 2,400 mm, loading space height: 1,600 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t towing capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10 Rx 22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. We will deliver the Iveco with a fresh MOT/AU and H-certificate upon request. = +500€ The GVW is 12.5t. The curb weight is approximately 8.0 t, so the 120-23 cannot be reduced to 7.5 t. The V8 diesel engine and 5-speed transmission run smoothly, the car is easy to drive. Laedjx A N Sfspfx Aanjk Top speed according to the documents = 93 km/h Bag dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW Lodpfx Aaswqr Rvoneak ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: used, Year of construction: 2002, Dimensions (LxBxH): 355 x 125 x 173 cm Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 95140 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle diameter [mm]: 40 Laedpjxykrzofx Aanek - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Min. planing width [mm]: 13 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1.5 - Transport dimensions: 3550mm x 1250mm x 1730mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2025, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - Laodpfx Ajci Tvheanek working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: good (used), power: 126 kW (171.31 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 9,325 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMT0D120K01030695 Technical information Track width: 86 cm Drive: Track Make of engine: SAA6D107E-2 Empty weight: 18.690 kg Functional Working width: 365 cm CE mark: yes Condition Ljdpfx Aoxxpd Hoanjak Technical condition: good Visual appearance: good Other information EPA Marked: yes Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 5,4x3x3,45 Production country: JP Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: refurbished (used), Year of construction: 2023, operating hours: 810 h, load capacity: 1,400 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 251 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles in stock ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase On-site demos and consultations available now – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Type: Electric Pallet Truck EJE 114 Drive type: Electric Load capacity: 1,400 kg Year of manufacture: 2023 Lodpfx Aasw Uctnjnoak Operating hours: 810 Lift height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 251 kg Load center: 600 mm Tires: Polyurethane Model type: EJE 114 Battery type: Gel Battery weight: 156 kg Charger: Integrated charger

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, loading space length: 3,800 mm, loading space width: 2,400 mm, loading space height: 1,600 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) Lodpfx Aaox A N R Uonjak +++ Errors, changes, and prior sale are reserved.

Condition: ready for operation (used), Ixion BS 23 STG with thread cutting device Laedpfx Aajxvzw Tonok

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Ledpfevbwzvjx Aansak Number of heads 6 Arrangement of heads Bottom Right Left Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Condition: used, mileage: 7,16,056 km, power: 220 kW (299.12 HP), first registration: 08/2008, fuel type: diesel, number of seats: 48, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, parking heater, +++Engine runs, consumes coolant/water+++ General Engine: Mercedes-Benz AdBlue Emission standard: EURO5 Total number of seats: 48 Seating configuration: 47+1 fixed/high Standing places: 112 Transmission: Automatic Safety * Retarder * ABS, ASR, EBS * Fog lights * Reversing camera Passenger compartment * Auxiliary heater * Driver’s microphone * Pram/stroller space * Wheelchair ramp * Wheelchair area * Stop-request button * Interior camera Exterior * Matrix/destination display system * Double-width doors, number: 3 * Lift/lower system * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilators Miscellaneous * German registration certificate * Twin tyres * Vehicle length: 17.94 m * Vehicle width: 2.55 m * Vehicle height: 3.10 m * Hubcaps * Tyre condition: front axle approx. 40% * Tyre condition: middle axle approx. 40% * Tyre condition: rear axle approx. 40% our internal vehicle number: 11873 Laedoxu Sxxepfx Aansk Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles in stock at all times.

Condition: used, Year of construction: 2002, functionality: unexamined, machine/vehicle number: 27233, travel distance X-axis: 5,047 mm, travel distance Y-axis: 2,060 mm, travel distance Z-axis: 275 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 30 m/min, table width: 1,650 mm, table length: 4,500 mm, rotational speed (max.): 24,000 rpm, overall weight: 600 kg, For sale is a high-quality Biesse Rover 35 L, a powerful CNC machining center ideally suited for precise processing of wood, plastics, and composite materials. The machine stands out for its robust construction, high precision, and versatile application possibilities – perfect for medium-sized and industrial manufacturing operations. The Biesse Rover 35 L has not been used in the past 5 years due to an upgrade to a larger CNC machine. Ljdpfx Aasxpf Rwsnoak The tools shown in the pictures are included in the sale price. Known defects: - C-axis defective - Safety mats defective - Vacuum suction cups should be replaced. Availability: immediately

Condition: used, mileage: 1,12,348 km, power: 232 kW (315.43 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, 1344Bh 4/25 Left-hand drive, differential lock, steered/liftable trailing axle, stop brake for waste collection vehicle, 3-seater, ASR, ADR, central locking, speed limiter 30/85 km/h, radio, rotating beacons, pop-up roof, decorative inlays, armrests, sun blind, cornering light, daytime running light, LED position lights, emergency brake signal (ESS), Brake Assist 2, Lane Guard System 4, HS turning assistant, Olympus Industrial 23 m³ with HS dumping hopper Comfortlift type U-K-KL EuroMax, suitable for 80 l to 5 m³, bulky waste collection with foldable chute, comfort gearshift, central lubrication system, hopper lifts approx. 2 t, Welvaarts scales Laodpfxjwcikqo Aanjk

Condition: used, Year of construction: 2008, fuel type: electric, color: blue, Weights Empty weight: 6.940 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.430 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Laodsv Tihlspfx Aanek Max. horizontal reach: 1230 m Transport dimensions (LxWxH): 6,53x1,5x1,98 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: Z40/23N RJ Year of build: 2008 Condition: Used Data: Max. working height: 14,32 m Platform height: 12,32 m Max. reach: 6,91 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,17 x 0,76 m Swivel range: 355° Max. climbing capacity: 30 % Total dimensions LxWxH: 6,53 x 1,50 x 1,98 m Ground clearance: 0,24 m Drive type: Battery Own weight: 6.940 kg Special features: Swivel work basket 180°, vertical cage arm 128°, white tires. Location: 41468 Neuss: immediately available

Condition: good (used), Year of construction: 2019, Year of manufacture: 2019 Technical condition: good Visual condition: good Lasdpfx Aox Dtwbjanok Price: On request Please contact John de Koning or Mark de Koning for further information.