Used Safety Cabinet for sale (14,264)

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet also known as a biosafety cabinet designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Protection & Compliance Fpjdexhfkbspfx Aa Eep Meets the European standard EN 12469:2000 for microbiological safety cabinets It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, This listing is for the ICN Biomedicals Flow Gelaire BSB Class 2 Safety Cabinet Fedpfxjxhfpqe Aa Eopp The unit is in full working condition and is ready for immediate use Gelaire Class II Biological Safety Cabinets These are widely used internationally and are known for their high safety, energy efficiency, and ergonomic design. Key features include: Airflow & Protection They employ part-recirculating laminar airflow and separate H14 HEPA systems for both supply and exhaust. The design ensures a consistent air barrier at the front opening and maintains sterile downflow inside, all within a biodynamic sealing system that uses negative pressure around any positive-pressure zones. Eco® Control System A smart microprocessor actively regulates airflow to compensate for filter loading, manage power consumption, and maintain safe operational flow rates. Monitoring & Safety Alarms Cabinets offer real-time display of airflow velocities, internal and external temperatures, operation hours, filter life, and fan power factor. Audible and visual alerts warn of airflow deviations or other malfunctions. Standby power-saving modes and “blackout” reporting (in the event of power failure) are included. Construction & Ergonomics The housing features antimicrobial powder-coat finish, and interior zones are stainless steel (Type 304 for work zones, Type 316 for the tray). Hinged or electric sash options (depending on model) and ISO-aligned ergonomic design, noise under 60 dB(A), and smooth operation are standard. Options & Accessories Available extras include gas and vacuum taps, splashproof power outlets, UV germicidal lamps, different exhaust configurations (top, left, right), adjustable stands, carbon exhaust filters, armrests, and fumigation seals.

Condition: used, This listing is for the Basair Laminair Flow P Range Safety Cabinet The unit is in full working condition and is ready for immediate use Bassaire P-Range Laminar Flow Units are designed to provide an ultra-clean, particle-free environment to protect products, conforming to BSEN ISO 14644 (ISO Class 4 & 5) standards. Constructed from high-quality powder-coated white carbon steel or stainless steel, these units offer reliable vertical laminar airflow and are suitable for laboratories requiring strict contamination control Fpjdpfx Aasyu Tite Eep

Condition: used, Thermo Scientific Type: Herasafe 2030i 1.5 Safety Workstation The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for maintaining critical performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, electrically operated window, segmented work surface in 30 cm sections, and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base, 1.5 m. Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) internal: 627 x 1500 x 780 mm 230 V, 9 A, 2010 W Condition: used / like new (Changes and errors in the technical data are subject to change!) Fedjzd Udpepfx Aa Eepp We will be happy to answer any further questions you may have by telephone.

Condition: used, Thermo Scientific Type: Herasafe 2030i 1.5 Safety workbench The Herasafe 2030i series of biological safety cabinets draws on many years of experience in global leadership in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity to maintain important performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Fedozd Udvepfx Aa Espp Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, an electrically operated window, a segmented work surface in 30 cm sections, and a 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base, 1.5 m. Includes a Thermo cross-beam UV lamp. Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) internal: 627 x 1500 x 780 mm 230 V 9 A 2010 W Condition: used / like new (Changes and errors in technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for the Big Neat. F3-XIT Safety Cabinet The unit is in full working condition and is ready for immediate use The Bigneat F3‑XIT is a benchtop powder weighing safety cabinet manufactured by Bigneat, tailored to protect operators from exposure to dust and particulates while handling and weighing fine powders. It features a compact footprint and excellent visibility through its acrylic enclosure, ideal for precision work. MedicalExpo DirectIndustry Key Features: Compact design with great all-around visibility, available in two access styles: F3‑XIT‑D: Hinged access flap. F3‑XIT‑S: Corner “tear drop” access. Recirculating HEPA filtration, including a pre-filter and HEPA filter that removes particles down to 0.3 µm with 99.997% efficiency, returning clean air back into the lab. Balanced airflow: Fjdoxhff Sspfx Aa Ejpp Pre-set to a capture velocity of approximately 0.35 m/s, proven to offer both effective containment and stable weighing condition

Condition: used, This listing is for a CAS BioMAT Class 2 Microbiological Safety Cabinet. The unit is in full working condition and is ready for immediate release. The BioMAT 2 combines decades of expertise in containment design to offer a range of Class 2 microbiological safety cabinets that prioritize safety, ease of use, and energy efficiency. It provides protection for operators and products while handling biological agents up to Hazard Group 3. Key Features: - User-Friendly Interface: Equipped with a 10cm x 6cm TFT touchscreen displaying real-time cabinet operations and an animated airflow diagram. Intuitive controls with crystal-clear iconography simplify functionality, while a four-digit password ensures security. - Energy Efficiency: Features energy-efficient EC fan technology and low-loss filters, consuming only 140W under typical operational performance (0.6 m/sec inflow and 0.35 m/sec downflow). The set-back mode reduces energy usage by automatically adjusting settings when the cabinet is unattended. - Safety Mechanisms: Full-width LED lighting provides clear indications of any airflow issues, supported by audible alarms and large red LED alerts for malfunctions. The animated airflow diagram gives instant feedback on cabinet status. - Quiet Operation: Designed with EC fans and noise reduction technology, the typical noise level is just 49dBA for the 1200mm models, ensuring a comfortable work environment. - Sustainability: The BioMAT 2 has achieved CarbonNeutral® product certification, contributing to laboratory carbon reduction goals. Product Specifications: - Construction: - Cabinet: 1.5mm mild steel Fpodpfsxxyctsx Aa Ejp - Inner Liner: Grade 304 stainless steel - Side Windows: 5mm UV-resistant toughened glass - Front Visor Options: - Fixed 200mm aperture with a night door for fumigation. - Aerosol-tight motorized sliding sash with anti-trap reverse function (BioMAT 2-S2). Exhaust Options: - Standard Exhaust: Single HEPA filter with anti-blowback damper. - Thimble Exhaust: Double HEPA filters for enhanced safety. - Recirculation: Double HEPA filters with options for vertical or horizontal air discharge. - Worktrays: Made from grade 316 stainless steel, available in single or divided sections to meet user needs. - Support Stands: Options include fixed height, manually adjustable, or fully DDA-compliant motorized stands. Applications - The BioMAT 2 is ideally suited for laboratories handling biological agents and provides a flexible design tailored to specific laboratory requirements.

Condition: used, This listing is for a Envair Safety Cabinet Fpjdpfoxzgv Sox Aa Eop

Condition: like new (used), Number: 30206550 Operating hours: 4,686 h Performance: Internal dimensions: Dimensions: 1,300 x 900 x 1,450 mm Height with frame: 2,100 mm Fedsi Ra Tgepfx Aa Ejpp Weight:

Condition: used, This listing is introducing 8 No Envair Mobile Isolators of different specifications currently held in our stock The units are in full working condition and ready for immediate use Fpjdpfx Aaoxv Dhbj Eep Envair Mobile Isolator Envair Technology is a UK-based manufacturer specializing in clean air and containment solutions for the healthcare, biotechnology, and pharmaceutical industries. Their product range includes a variety of isolators designed to provide controlled environments for handling hazardous substances, ensuring both operator and product safety. Applications Envair isolators are widely used in a variety of applications including Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage developmen Key Features of Envair Isolators Positive and Negative Pressure Models: Envair offers both positive pressure isolators protect the product from contamination and negative pressure isolators to protect the operator from hazardous substances Compliance with GMP Standards: Many Envair isolators meet EU GMP Grade A and ISO 5 classifications, ensuring sterile, controlled environments. Customizable Designs: Envair provides bespoke solutions tailored to specific client needs, including unique dimensions and technical requirements. Advanced Containment Technology: Isolators are equipped with automated pressure decay leak tests, electromagnetic interlocks for transfer chambers, and integrated decontamination systems. User-Friendly Controls: Most units include intuitive touchscreen interfaces and PLC-based systems for simple and efficient operation. Growing Need for Containment with HPAPIs Demand for personalised medicines containing High Potent Active Pharmaceutical Ingredients (HPAPIs)—particularly in newer super-potent oncology, cardiovascular, and diabetes treatments—is increasing rapidly. These medicines often require shorter turnaround times, forcing pharmaceutical process manufacturers to develop faster, more agile workflows. In such high-risk, high-value settings, a GMP-compliant environment is not optional—it’s critical. It’s easy to overlook the fact that the people developing, manufacturing, and dispensing these complex drugs are at risk of exposure to harmful, sometimes lethal, compounds. Their safety is paramount, given the essential role they play in maintaining a reliable supply of advanced therapeutics. Expertise in HPAPI Handling for CMOs & CDMOs Envair has specialist expertise in helping Contract Manufacturing Organisations (CMOs) and Contract Development and Manufacturing Organisations (CDMOs) safely handle HPAPIs—even within existing non-contained facilities. Their isolator systems are designed, manufactured, and installed to meet rigorous containment performance levels below 1μg/m³ (OEB 5). Each system is custom-engineered for the specific site and process step—whether it’s weighing, mixing, milling, spray drying, or packaging. Applications Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage development

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Fpedpfx Aexr Awaea Eep Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Condition: used, Mytron Type: WT 850 Mytron Drying Cabinet The WT 850 drying cabinet is used for the simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust design (box-profile frame) and the use of stainless steel for the heating chamber, the WT 850 drying cabinet can be used universally. The rolling cart allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust nozzle with a regulating flap allows the cabinet to be connected to a central extraction system. Technical Data: External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm Dimensions of the heating chamber: Width 850 mm x Height 690 mm x Depth 1410 mm Volume of the heating chamber: approx. 830 liters Weight: approx. 230 kg, cart 50 kg Fedozd R Tmopfx Aa Eepp Temperature range: 10°C above ambient temperature to +120°C Spatial temperature consistency: ± 1°C Temporal temperature consistency: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug Power consumption: 4.5 kVA Fusing: 3 x 16 AT, 1 x 6 AT Control: Digital controller Safety device: adjustable over-temperature protection Through-hole: Exhaust nozzle 100 mm with regulating flap at the top Intake nozzle 100 mm with regulating flap at the top Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Fsdj Agw Enspfx Aa Espp Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: used, Sandblasting cabinet Manufacturer: ELMAG Type: PAL-2N Year of manufacture: unknown Maximum workpiece size: approx. 50 x 70 x 50 cm Cyclone separator for abrasive recovery Pneumatic injector nozzle P/3 Tungsten carbide blasting nozzle Safety foot pedal (start/stop) Extraction fan Dust filter bag New windows and new gloves P/3 injector Ø 3 mm: 600 l/min air flow P/3 injector Ø 3.5 mm: 800 l/min air flow P/3 injector Ø 4 mm: 1,200 l/min air flow P/4 nozzle Ø: 6 / 8 / 10 mm Dust-tight cover with quick-release fasteners Simple workpiece positioning Voltage/frequency: 400 / 50 V/Hz Fsdsz Hmb Njpfx Aa Espp Cabinet interior: 60 x 88 x 78 cm Dimensions: 1,150 x 980 x 1,900 mm Weight approx.: 120 kg 121126ä

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet Fpsdpfxexv D Eyj Aa Ejp The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Condition: new, Carbolite Gero AX30 Heating Cabinet *New price: €3185   The Apex AX series heating cabinets are economical laboratory devices for temperatures up to 250°C.   - Forced-air fan for short heating times and excellent temperature homogeneity - Stainless steel inner chamber - Two height-adjustable, chrome-plated shelves Fpodpfsq Hdfkex Aa Eop - Door with locking function and airtight silicone seal - Complies with safety standard BS EN 61010-2-010:2003   Maximum temperature 250°C Minimum temperature RT + 30°C Volume (liters) 28 Temperature homogeneity (°C) ±5.0 @ 250°C Heating time (min) 23 Recovery time (min) 3 Dimensions: Internal H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per shelf/total 10/20 (kg) Air changes per hour 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24   Item condition: new, without original packaging   You can find more Carbolite Gero AX heating cabinets in our shop! International shipping costs available upon request!

Condition: new, Carbolite Gero AX30 Heating Cabinet *New price €3385 Heating cabinets from the Apex AX series are economical laboratory devices for temperatures up to 250°C. - Digital PID controller R38 - Forced-air fan for short heating times and excellent temperature uniformity - Stainless steel inner chamber - Two height-adjustable, chrome-plated grid shelves - Door with locking function and airtight silicone seal - Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (liters) 28 Temperature uniformity (°C) ±5.0 @ 250°C Heating time (min) 23 Recovery time (min) 3 Dimensions: Internal H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per shelf/total 10/20 (kg) Air changes per hour 65 Fjdpfx Aoq Hdfnsa Eopp Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Item condition: new, without original packaging You can find other Carbolite Gero AX heating cabinets in our shop! International shipping costs upon request!

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier.” Manufacturer: ASO Safety Solutions Type: 41-322 (ELMON relay) Category: Safety evaluation unit / safety relay (ELMON family) Function: Evaluation of safety contact mats, safety edges and bumpers; monitoring of sensor current; support for 4-wire sensors Fpodpozr Ucuofx Aa Ejp Connections / Operation: Terminals / LED display for status; operating instructions and connection examples in the manual Protection class / Mounting: for control cabinet / inline mounting

Condition: new, functionality: fully functional, Year of construction: 2026, Dust Extraction System for Cabinet Sandblasting Machines The dust extraction system for cabinet sandblasting machines is a specialised extraction unit designed to improve visibility, cleanliness, and workplace safety during abrasive blasting operations. Equipped with a built-in 1100 W motor and an efficient filtration system, the unit ensures effective removal of contaminants from the working area. It is an essential component of every sandblasting cabinet, especially when used intensively in industrial environments. Main Advantages of the Machine 1100 W motor – provides high extraction performance while maintaining the unit's compact dimensions. Capacity of 3 m³/min – effectively removes dust and improves visibility inside the cabinet during operation. High-efficiency filter – captures fine dust particles, helping to protect the operator's health and improve the quality of the working environment. Stable construction – designed for operation with large sandblasting cabinets. Compact dimensions – allow easy installation near the cabinet, even where space is limited. Construction and Technology The extractor is equipped with an efficient 230 V/50 Hz electric motor that generates a stable extraction airflow, essential during intensive sandblasting operations. The unit's housing is made of durable materials resistant to industrial conditions. The 310 x 170 mm filter effectively captures even fine dust particles, preventing them from being re-suspended in the air. The 52 mm inlet diameter ensures compatibility with most sandblasting cabinets. Precision and Work Efficiency Fedpfx Aaorh E Azs Eopp Thanks to its high-efficiency filtration system, the extractor eliminates excessive dust accumulation inside the cabinet, which directly improves the precision of the abrasive blasting process. Improved visibility allows for more accurate cleaning of components and reduces processing time. Reducing the amount of airborne dust also helps extend the service life of other cabinet components, such as lighting systems and door seals. Applications The unit is recommended for use with sandblasting cabinets featuring a large working area, where significant amounts of dust are generated. It is suitable for repair workshops, metalworking shops, and industrial production facilities where regular sandblasting requires clean air to be maintained. The extractor is compatible with most cabinet sandblasting machine models; however, attention should be paid to the different mounting-hole spacing used on the KDP200, KDP200TOP, and KDP220TOP models. Standard Equipment Integrated 230 V electric motor High-efficiency filtration system Housing with wall-mounting bracket 52 mm diameter inlet Technical Specifications Specification Value Extraction power 1100 W Capacity 3 m³/min Power supply 230 V / 50 Hz Noise level 85 dB Inlet diameter 52 mm Handle length 280 mm Extractor dimensions (height × diameter) 730 × 260 mm Filter dimensions (height × diameter) 310 × 170 mm Weight 9.5 kg

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Fsdpfozxgtfsx Aa Espp Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Year of construction: 2025, condition: new, Manufacturer: Consolidated / Baker Hughes Model: 1910-00K-1-CC-MS-31-RF-LA-HP-PED Year of manufacture: 2025 Quantity available: 3 units Condition: New surplus equipment, visually in excellent condition We offer three Consolidated 1910 Series industrial safety relief valves, manufactured in July 2025 by Dresser Italia S.r.l. The valves are designed for liquid service and feature original manufacturer identification plates with CE, ASME UV, and NB markings. Technical specifications: Series: Consolidated 1910 Outlet size: 3" / DN80 Service medium: Liquid Set pressure: 9.5 bar / 10.7 bar Fjdpfez Nh Idox Aa Ejpp Nominal lift: 15.37 mm Flow area: 1,379.35 mm² Manufacturer: Dresser Italia S.r.l., Italy Manufacturing date: 07/2025 Available units: Serial number: N-25-006784 – Set pressure: 9.5 barg – Tag: SVP773 Serial number: N-25-006986 – Set pressure: 10.7 barg – Tag: SVP1122 Serial number: N-25-006785 – Set pressure: 9.5 barg – Tag: SVP775 Condition and documentation: The valves are in visually excellent condition. Previous installation or operating history has not been confirmed. Individual test certificates are not currently available. Available from our warehouse in Rotterdam, the Netherlands. Worldwide shipping can be arranged upon request. Please contact us for additional pictures, technical information, or a quotation.

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film. Fsdpfx Aowc Nrnja Espp

Condition: like new (used), Year of construction: 2012, Apfel – Tool cabinet with four drawers Fpjdpfx Aj Afdgtoa Eep suitable for long tools / reamers & deep-hole drills, etc. - Year of manufacture: 2012 - 3 x drawers, each 180 mm wide / load capacity 900 kg each - 1 x drawer, 300 mm wide / load capacity 1800 kg - Overall height: 2140 mm - Cabinet dimensions (W x H x D): 1040 x 2140 x 1300 mm - Empty weight: approx. 450 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Fpodpfx Aaohwv N Hs Ejp CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2014, condition: like new (used), functionality: fully functional, machine/vehicle number: 375, The mixer is in fully working condition and has been stored in a warm and dry hall. An X-GUARD enclosure made of stainless steel, along with components of the Safety system, has been installed around the mixer. Fpjds Af Sd Dopfx Aa Eop The mixer has been used a few times for technological tests – its condition is like new. The unit has a complete set of technical documents, including a declaration of conformity. The documentation with details of the unit’s construction is attached. Capacity: 750 liters Power: 4 kW Drum rotation speed: 2-9 rpm