Used Sajjad And Lichner for sale (6,653)

Condition: ready for operation (used), Ishida X-Ray Inspection System w/ Ishida Digital Automatic Checking System and Ishida Check Weigher, Model# IX-GA-65100-A, Serial# 79205, Single Phase, 230V, 50/60 Hz Fsdjt Eld Nopfx Aabepn

Condition: new, Year of construction: 2025, Model ML-1200 Fjdsvc Afcspfx Aabopn Infrared protection Automatic oil system Max. sheet size 1200X820(mm) Machine speed(Strokes/Min) 20±2 Max.Rule Length(m)

Condition: used, Year of construction: 1986, Please contact ATS Norway for more information Please provide reference number upon request: 21514 Specifications: 1986 model Hours: approx. 13,200 Not certified Weight: 14,740 kg Gjerstad bucket Tires (see pictures) Scale Rotating beacon Radio AC/climate control Delivery by agreement Description:1986 Volvo BM 4500 wheel loader with scale and bucket.Left front cylinder is slightly leaking.Delivery by agreement. Own weight: 14740 Model: Volvo BM 4500 hjullaster Fpjdpfxexl Ra Ne Aaben

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany, Heusweiler 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. Fodoxlvl Depfx Aabepn 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2022, operating hours: 89 h, Drive: Wheel Empty weight: 1.700 kg Fodpfstr Hvfex Aabjpn Lifting capacity: 230 kg Working height: 800 cm Serial number: 5318035 Transport dimensions (LxWxH): 1.78x0.77x2.12 Please contact PFEIFER GROUP for more information

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW Fpodpfoxlptusx Aaben In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: excellent (used), Year of construction: 2017, Pulsemaster 40KW PEF-Pulse Electric Field continuous system to treat fruit juices and purees in order to increase shelf life without heat treatment. The system is complete and in good working condition. It was used by Orchard House in the UK mainly on orange juice till the company went bankrupt. Capacity is from 1000 to 5000 L /hour. The machine is in storage now. Upon agreement it can be tested at the buyer's site. Fpodpfx Aomii Avsabjn

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Fodpfxow Raf Hs Aabepn Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: used, Year of construction: 2018, Serial number: W09S3L330J0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21508 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Decent tires Air suspension Hydraulic loading ramps Fpsdpoxlx Tdofx Aaben Extendable Manual widening Toolbox Max payload: 39,265 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 11635 Total Weight: 50900 Payload: 39265 Width: 255 Length: 1355 Model: Doll Maskinsemi m/ Bredding og Hydrauliske bruer

Condition: used, Year of construction: 2019, Serial number: W09S3L330K0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21506 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Good tires Air suspension Hydraulic loading ramps Extendable Manual widening Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Toolbox Max payload: 39,190 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is recently EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 11710 Total Weight: 50900 Payload: 39190 Width: 255 Fpedpfexlx S Hjx Aabsn Length: 1355 Model: maskinsemi

Condition: used, Year of construction: 2019, Serial number: YAMT13XX9J010xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18158 Specifications: - 3 axle - Lift on 1 - Turn on 3 - Hydraulic bridges - Manual widening - Extension: 6 metres - Tool cabinet - 10.5 tonne axles - Max payload: 37,529 kg - Ready for delivery Description: Max Maskinsemi from 2019. The trailer is EU-approved and ready for delivery. It has hydraulic bridges, manual widening and an extension of 6 metres. Technical approved: Yes EU-approved until: 12.09.2026 Own weight: 11971 Total Weight: 49500 Fsdpfxovg N D To Aabjpn Payload: 37529 Width: 254 Length: 1325

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 12338 Specifications: - Everything electrically new 4 years ago. - Trakt. - Ok jaws. - Control cabinet in container. - Container included. - Soft start. Description: Jaw crusher with electric control. Everything from electricity is new 4 years ago. Supplied with container for electrical cabinet. Mounted soft start. Fpedpfsvgy Agjx Aaben

Condition: used, mileage: 7,00,000 km, Year of construction: 2008, Serial number: YS2R6X2000203xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20999 Fpedpfsxkt Nkex Aabjn Specifications: 2008 model Km: approx. 700,000, new engine approx. 180,000 Euro 5 6x2 Wheelbase: 310/131 cm Hydraulics NATO connector Cosmetic damage Toolbox AC/climate control Bed Radio/DAB Trailer not included Ready for delivery Description:2008 Scania 480 6x2 truck with hydraulics and new engine.The truck has run approx. 700,000 km, with new engine at around 180,000.Equipped with hydraulics.Ready for delivery. Km: 700000 HK: 480 Technical approved: Yes EU-approved until: 12.06.2026 Own weight: 9780 Total Weight: 27000 Payload: 17145 Width: 255 Length: 705 Euro: 5

Condition: used, mileage: 2,80,000 km, Year of construction: 2013, Serial number: YS2G8X2000208xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21465 Specifications: 2013 model Km: approx. 280,000 (may increase) 8x2 Euro 5 Wheelbase: 335/136 cm 480 hp Suspension: parabolic front, air rear Retarder Winter-approved tires (see pictures) Saraka 8m³ body Internal tank (see pictures) Long chute Short chute High-pressure washer Form oil Remote control Extra battery with charger Flashing lights front and rear DAB/radio Fodjxkt Iaepfx Aabjpn Delivery by agreement Description:2013 Scania G480 8x2 concrete truck with 2013 Saraka body and long chute.Comes with remote control, extra battery, and charger.Tank has not been chipped since winter/spring 2025.Video available.Delivery by agreement. Km: 280000 HK: 480 Technical approved: Yes EU-approved until: 02.12.2025 Own weight: 14140 Total Weight: 33000 Payload: 18785 Width: 255 Length: 945 Euro: 5 Model: G480

Condition: used, Year of construction: 2018, operating hours: 2,887 h, Serial number: 9xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18268 Description: Nice 2018 Liebherr R914 with lots of equipment. It can be mentioned that it comes with Novatron GPS, engcon rototilt and 4 buckets. Fpedpfx Aasvgyy Sjben Gps was upgraded when the owner bought the machine. So it's approx. from 2018, the machine has previously had a drill press, so everything has been prepared for this. Service has recently been carried out and the machine is ready for use. Full history is available. Machine ready for delivery.   Specifications: - Certified until February 2025 - Registered in the machine register - Only 2887 hours - Prepared for compressor and drill - Extra hydr. - Novatron 3D GPS, upgraded version - Good undercarriage - Lots of extra light around the machine - 2 pcs. cleaning buckets - Grave bucket - Narrow bucket - Cutter - 90 kw - 6.8 km/h - Reversing camera - Central grease - 18100 kg - 60 fasteners - Engcon rototilt - 60 belts - Total width 260 cm - Webasto - Service performed - Machine ready for delivery Hours: 2887 Total Weight: 18100 Year controlled: Yes Year controlled until: 02.25 Width: 260 Kw: 90

Condition: used, Year of construction: 2015, operating hours: 2,100 h, Serial number: VCEL30GSC0322xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21487 Fpodpexkt N Refx Aabon Specifications: 2015 model Hours: approx. 2100 Weight: 6650 kg 4x4 Decent tires Certification expired 09.2025 Front hydraulic outlets Pallet forks Fork length: 120 cm Volvo bucket, 1 m³ Radio/CD Climate control/AC Serviced at local workshop Ready for delivery Description:Well-maintained Volvo L30G wheel loader.The machine is sold with bucket and pallet forks.Lightly used and ready for delivery. Hours: 2100 Own weight: 6650 Year controlled: no Year controlled until: 09.25 Model: L30G

Condition: used, Year of construction: 2016, operating hours: 7,810 h, Serial number: HCMDED50C0008xxxx Please contact ATS Norway for more information Fedpfx Aasxkt Nwsbjpn Please provide reference number upon request: 21486 Specifications: 2016 model Hours: 7810 Weight: 8290 kg 34.1 kW Undercarriage (see pictures) Track width: 45 cm Blade Total width: 230 cm S50 quick coupler Digging bucket Grading bucket Rototilt Climate control/AC Extra lights Maintenance done by owner Ready for delivery Description:Hitachi ZX85 tracked excavator from 2016.The machine is sold with Rototilt and 2 buckets.Ready for delivery. Hours: 7810 Own weight: 8290 Width: 230 Kw: 34,1 Model: ZX85US-5A

Condition: used, Year of construction: 2007, operating hours: 1,050 h, Drive: Track CE mark: yes Serial number: 2724xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21491 Specifications: 2007 model 1050 hours 1636 kg 11.1 kW Machine width: 1.32 cm Hydraulic widening of chassis Fpsdpfexlbcnox Aabon Chassis (see pictures) Cut Swinging boom Rubber belts Side window is being replaced before sale Climate Radio Light Ready for delivery     Description: We have a 2007 Volvo EC15B xtv excavator w/ gr fte bucket and hydraulic sander bucket for sale. The machine functions as it should according to the owner and has few hours compared to its age. Side window will be replaced before sale. Machine is ready for delivery. Hours: 1050 Own weight: 1636 Kw: 11.1 CE: Yes Model: EC15B

Condition: used, Year of construction: 2013, operating hours: 8,412 h, Serial number: VCEC180DK0022xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21168 Specifications: Fpodpfxexg Ac Sj Aabon Certified until: 10/2025 Model year: 2013 Hours: approx. 8,412 (increasing with use) Operating weight: 19,740 kg Power: 105 kW Undercarriage (see pictures) Digging bucket SMP grading bucket Tiltrotator Central lubrication Quick coupler Rear-view camera Track width: approx. 60 cm Machine width: approx. 280 cm Rotating beacon Extra work lights Radio/CD Air conditioning Description:Volvo EC180DL tracked excavator, model year 2013.Equipped with tiltrotator, grading bucket, and digging bucket.Certified and currently in daily operation.Delivery by agreement. Hours: 8412 Own weight: 19740 Width: 280 Kw: 105 Model: EC180DL

Condition: used, Year of construction: 2013, operating hours: 3,475 h, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21450 Specifications: 2013 model Hours: approx. 3,475 Power: 33.8 kW Weight: 5,257 kg Undercarriage (see pictures) Rubber tracks S40 quick coupler Machine width: approx. 200 cm Track width: approx. 40 cm Engcon tiltrotator Grading bucket Extra work lights Rotating beacon Fpedpfx Aasxg Aclsbjn Dozer blade Radio/CD Air conditioning Description:Kubota KX57 tracked excavator from 2013.Delivered with grading bucket and Engcon tiltrotator.The machine has only 3,475 hours and no known issues.Available for prompt delivery. Hours: 3475 Own weight: 5257 Width: 200 Kw: 33.8 Model: KX 057-4

Condition: used, Year of construction: 2011, operating hours: 7,300 h, CE mark: yes Serial number: XDCH130R5NBFADxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21387 Specifications: - 2011 model - Hours: approx. 7,300 - Weight: 14,400 kg - 70.9 kw - Certified in June - Excavator buckets with teeth - Cleaning bucket - ​​Rototilt - Machine width: 259 cm - Track width: 60 cm - Reinforcements added to the boom - Undercarriage (see pictures) Fpjdpexfp Skjfx Aabon - Central lubrication - AC/climate - Ready for delivery Description: 2011 Case CX130B excavator with rototilt and two buckets. There were cracks of 5-6 cm on the boom but reinforcements of 20 cm have been added. The machine was certified in June. Watch the video. Ready for delivery. Hours: 7300 Own weight: 14400 Year controlled: Yes Year controlled until: 06.26 Width: 259 Kw: 70.9 CE: Yes Model: CX130B

Condition: used, mileage: 7,00,000 km, Year of construction: 2005, Serial number: YS2R6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21047 Specifications : - 2005 model - Km: approx. 700,000, new engine approx. 220,000 - Not EU approved - Wheelbase: 470/136 cm - Tires (see pictures) - Spring: air - Retarder - Battery back Fsdpfx Ajw Ia Eneabopn - Tool cabinet - Automatic - Bed - AC/climate - Radio - Delivery by appointment   Description : 2005 Scania R500 container truck with lift and replaced engine. ECT. According to the owner, the car has done 700,000 km, it is very old so this should be double checked. The car has had the engine replaced which Owner says it has done around 220,000 km. The reason for the repair object is that the car has been standing for 10 years, which must be taken into account in the cost of the car to get it EU-approved. Delivery by arrangement. Km: 700000 Technical approved: no Own weight: 1 Model: R500

Condition: used, Year of construction: 2004, operating hours: 12,270 h, Please contact ATS Norway for more information Please provide reference number upon request: 17220 Specifications: - 2004 model Fpjdpfxsvgyfne Aabon - Hours: Approx. 12,270 (will increase) - Weight: 38,800 kg - Undercarriage (see pictures) - Belt width: 60 cm - Grave bucket - Microfine GPS system (uncertain condition) - Additional hydraulics - Extra light - Central grease - Quick attach - Services taken by owner - Ready for delivery Description: Volvo EC360 crawler excavator. The machine is sold with a digging bucket and GPS. The owner believes it should work as it should. Ready for delivery. Hours: 12270 Total Weight: 38800

Condition: used, mileage: 1,00,000 km, Year of construction: 2012, Serial number: YV2VH80C2CB62xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21383 Specifications: - 2012 model - Km: approx. 100,000 - EU-approved until 23.04.2026 - 6x2 - Wheelbase: 348 cm - Tires (see pictures) - 2012 NTM body - Inner tube (see pictures) - Cosmetic damage Fedpoxfgcaefx Aabjpn - Rear view camera - Automatic - Radio/DAB - Ready for delivery Description: 2012 Volvo FE 6x2 compactor truck with NTM body. The car has a low km of around 100,000. The damage to the front is only cosmetic damage. Ready for delivery. Km: 100000 HK: 336 Technical approved: Yes EU-approved until: 23.04.2026 Own weight: 15020 Total Weight: 27000 Payload: 11905 Width: 250 Length: 906 Euro: 5 Model: FE Gearbox: Automatic

Condition: used, Year of construction: 2013, operating hours: 11,170 h, Serial number: KMTPC180K55K5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21438 Specifications: Model year: 2013 Approx. 11,170 hours Power: 116 kW Operating weight: 22,260 kg Undercarriage: see photos Track width: 60 cm Machine width: approx. 300 cm Digging bucket Grading bucket Hydraulic breaker Indexator tiltrotator (2013) S70 quick coupler Rear-view camera Central lubrication Work lights Beacon light Radio/CD Climate control (A/C) Fpsdpfxexgm Ewo Aabsn Description:Komatsu PC210 tracked excavator from 2013 for sale.The machine is equipped with tiltrotator, grading bucket, digging bucket, and hydraulic breaker.Well maintained and ready for work.Available for quick delivery. Hours: 11170 Own weight: 22260 Width: 300 Kw: 116 Model: PC210LC-8