Used Edgebander for sale (1,061)

Call

Condition: excellent (used), CATALOG NO. 7077 Ei2edur9ir TECHNICAL DATA - edge thickness 0.3 - 3mm - edge width 10 - 65mm - working pressure 6 bar - minimum radius of 20 degrees - height of the glue roller 80mm - 3 feed speeds - heating power of the heater 1.65 kW - total power 1.85 kW - voltage 400V - air demand 6 bar - worktop 840x1100mm - dimensions length/width/height 1870x1200x1200mm - weight 190 kg Net price: PLN 4900 Net price: EUR 1101 depending on the price of EUR 4.45 (Prices may change with higher volatility)

more

Listing

Medea

6,513 km

BRANDT KDN 210 AMBITION 1210

Call

Condition: good (used), Year of construction: 2016, Edgeband thickness max 3 mm Edgeband height max 55 mm Thickness of coiled edgeband max 3 mm Workpiece width min 70 mm Feedrate max 11 m/min Preheating zone Glue system granulate glue pot below feeding chain Quick-change glue pot Lvhhzdrr2t Trimming saw 2 motors Flush/radius/chamfer milling units 1 Scraper unit Profile scraper Buffing unit Magazine for single strips Aggregates actuated by control pneumatic Type right-side machine Quick-change aggregate(s) Machine length 3.507 mm BRANDT A 3 Gluing unit Control BRANDT EASYTOUCH Weight 700 kg CE marking

more

Listing

Cluj-Napoca

5,751 km

HOLZ-HER STREAMER 1057

€24,500

Call

Condition: good (used), Year of construction: 2019, We sell Holzher Streamer 1057, edgebander, Was bună în year 2019, from EET Târgu Mureș, New. The Machines Was used only în The Factory( little bussines) With 4 employers, The machine has a dedicate exhaust System and we offer an air compressor Balma. Cdleeq9l

more

Listing

Åkervägen 18, 696 32 Askersund, Sweden

6,585 km

Brandt KDF 650

€16,000

Edge banding machine Edgebander Holz-Her Uno 1307

Call

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-261-08-0754, Edgebanding machine Brandt Type: KDF 650 Serial no: 0-261-08-0754 Year: 2008 Edgebanding equipped with: Pre-milling, cutting unit, fine milling unit, corner rounding unit, profile scraper glue scraper, polishing unit. Note ! The return conveyor system is not included Techn data: Machine control PC 2X Pree milling unit Magazine Roll cutting unit strip from roll, edge material height 65mm, thickness 3mm Glue aggregate, quick melt, granulates Reactivation unit IR laser Pressure zone Cutting unit adjust the overhang Milling unit above, below Form milling unit corner rounding Profile scraper Glue scraper Polishing units Cx0l397la Edge material PVC 3mm Edge material wooden strips 12mm Edge material Melamine 0.4mm Electrical connection 400 volts, 3 HP, 50 Hz, 16kw Compressed air 6 bar, connection 1/2" Air consumption approx: 160NL/min Extraction nozzles 2x100mm, 790m3/h, 1x120mm, 1140m3/h Air speed 28m/sec Machine size: According to picture attached Weight: 2600 kg Stock no: 2001853BXA

more

Listing

Wijchen

(dealership location)

7,087 km

Holz-Her Uno 1307

Call

Condition: used, Year of construction: 2008, Edgebander Holz-Her Uno 1307 Year of construction 2009 380V Pre-milling unit (1801), 1x1.2kW &amp 1x0.8kW Czidlgmy93 Multi Glue System (1906), For EVA and PUR adhesives in cartridge Press Unit (1912) Edge saw unit Cutting unit (1824), 2x06kW, 18000rpm Shoulder milling unit (1832) Profile scraper (1929) Flat scraper (1895-12), arranged separately above and below Edge thickness 0.4 - 3mm Edge height 50-55 mm Workpiece width min. 65mm Workpiece length min. 160/210mm 4200x1000x1400mm (LxWxH), +/- 1500kg

more

Listing

Kaunas

5,941 km

HOLZ-HER Accord 1446

Call

Condition: used, Year of construction: 1994, Available immediately! Budlvouk

more

Listing

Sierakowska Huta

6,304 km

HOLZ-HER 1310 SPRINT

€5,978

Call

Condition: excellent (used), CATALOG NO. 7192 TECHNICAL DATA Easd8ld Equipment: - plate - tape feeder - tape pressure - glue tank (patrons) - guillotine – preliminary cutting of veneer - 3 pressure rollers - 2 ready-cutting units with balls - 2 milling units for shaping edges (radial cutters) - sanding units - for removing excess glue - polishing units - element thickness 8-60mm - min length of the workpiece 180mm - minimum width of the workpiece 60mm - thickness of veneer supplied from a roll 0.4-3mm - air demand 6-8 bar - diameter of the exhaust pipe 2x70mm - dimensions length/width/height 4320x1260x1830mm - weight 1080kg ADVANTAGES – German production – unpainted – original manual and documentation - very good condition – used edge bander Net price: PLN 26900 Net price: EUR 5,978 Net price calculated at the exchange rate of PLN 4.50/EUR (with larger exchange rate fluctuations, the price may change)

more

Listing

Klipphausen

6,545 km

Edgebander OTT Shark 2007

FORMAT 4 PERFECT 608

Call

Condition: good (used), Year of construction: 2015, Special equipment Suitable for nesting Edgeband thickness max 8 mm Edgeband height max 65 mm Thickness of coiled edgeband max 3 mm Workpiece length min 140 mm Workpiece width min 70 mm Feedrate max 12,5 m/min Continuously variable feed Glue system granulate glue pot below feeding chain Quick-change glue pot Suitable for PUR glue Spraying device Premilling unit Trimming saw 2 motors Flush/radius/chamfer milling units 1 Corner rounding unit 1 motor Scraper unit profile and flat Magazine for single strips Aggregates actuated by control NC-axes Type right-side machine E2mr0de Machine length 4.550 mm Control FORMAT 4 X-MOTION Weight 2.100 kg CE marking Declaration of CE-conformity Total connection 11 kW

more

Listing

Sulechów

6,413 km

Paul OTT Shark

€29,800

Call

Condition: reconditioned (used), Year of construction: 2007, OTT Shark edgebander 2007 The machine after a general service, all new tools and all necessary parts replaced with new ones. Machine ready to use. speed 20 m/min. material thickness 8mm - 50mm supplied: - preliminary cutters, controlled from the desktop 0-3mm - glue system, glue dosage controlled from the desktop - rim pressure zone - end trim cutting off the edge excess, adjustable Dj3oub - a set of spray nozzels (antistatic/cooling) - rought trimming - R2 profile trimming - aggregates for corner rounding (diamond tools) controlled from the desktop - profile scrapers R2 - flat scrapers - oscillating buffing wheels Available immediately. Ability to work with EVA and PUR glue If you are interested, please contact us to discuss the machine configuration in detail. The price in the advertisement is the net price. The content of the advertisements does not constitute a commercial offer within the meaning of the law, it is only informative. We are not responsible for any errors or outdated advertisements.

more

Listing

Varaždin

6,290 km

Edge banding machine Edgebander Cehisa EP-7

OTT Pacific+

€12,000

EXW Fixed price plus VAT

Call

Condition: refurbished (used), Year of construction: 2003, machine/vehicle number: C/63057, Functionality: fully functional, Dimensions: Length: 6000mm Bii0vebq3hw Width: 900mm Height: 1400mm Weight: 2600 kg 7'' TFT Touch Color Display Pre-milling unit with DIA cutters 85x30x42, Z3; board up to 40mm Double end cutting unit Flush trimming unit Fine chamfering unit Fine radius unit Edge scraping unit Rounding unit Glue scraping unit Brushing unit Panel edge before heating Anti-adhesive unit Tools on machine R=2mm Combi-Melt for EVA glue and PUR glue

more

Listing

Wijchen

(dealership location)

7,087 km

Cehisa EP-7

€2,750

Call

Condition: used, Edge bander Cehisa EP-7 Min workpiece length 120mm Min workpiece width 75mm Min/max workpiece thickness 8/45mm Min/max belt thickness 0.4/5mm Speed 10m/min Required air 6-7bar Total power 4kW J0orai Dimensions 3110x1800x1250mm (LxWxH), 750kg

more

Listing

Nevers

(dealership location)

7,297 km

HOMAG KDF 530 C

€24,000

Call

Condition: ready for operation (used), Technical characteristics Feeding speed 11m/min Composition : Edge feeder in roll form Diamond calibration Edge introduction Cutter Gluing unit Orientable end unit Trimming Scraper Angle copying Brush Programmable control with group indexing Compact machine - complete composition Epaisseur de panneau maxi50mm Snu7b Epaisseur de panneau mini8 mm Epaisseur de chant maxi8mm Epaisseur de chant mini0.4 mm Power and Motors Power: 10.5 Kw Overall dimensions Lenght: 5000 mm Width: 1000 mm Weight: 1900 Kg

more

Listing

Sierakowska Huta

6,304 km

STOMANA KZM 2

€2,422

edgebander Brandt kd 68 , parts

Call

Condition: excellent (used), Catalog number 7187 TECHNICAL DATA Equipment: - plate - tape feeder - guillotine – preliminary cutting - glue applicator - 2 pressure rollers - balls - cutting the tape, front/back - 2 up/down milling units - edge thickness 0.4-3.0mm - thickness of the processed element 10-45mm - element feed speed 5m/min - height to the table surface 850mm - table dimensions 1400x400mm - steady - table dimensions with support 2200x850mm - total power 3.6kW - power supply 400V, 50Hz - diameter of the exhaust pipe 120mm - electronic glue temperature regulator 20-250°C - compressed air pressure 6bar - dimensions length/width/height 2600x1200x1350mm - weight 410 kg ADVANTAGES – Bulgarian production – unpainted Bhg8jxeyg3q - very good condition – used edge bander Net price: PLN 10900 Net price: EUR 2422 Net price calculated at the exchange rate of PLN 4.50/EUR (with larger exchange rate fluctuations, the price may change)

more

Listing

Brandt kd 68 , parts Brandt kd 68 , parts

Skopje

5,843 km

Brandt kd 68 , parts Brandt kd 68 , parts

Call

Condition: used, Year of construction: 2000, Machine parts from Edgebander Brandt kd 68 , complete end trimming unit , complete trimming unit , polishing unit , glue scraping unit , complete electronics , pneumatic , Sensors , encoder , Inverter KEB , Pads , etc ..... Liyvkju8t7 We can send evrywhere in Europe and abroad ....

more

Listing

Italy

6,576 km

Edgebander BATCH 1

BIESSE BIESSE STREAM B1 10.5 MDS; PRS

Call

Condition: used, machine/vehicle number: 004955, Position 1: Edgebander BATCH 1 BIESSE-BIESSE STREAM B1 10.5 MDS; PRS 0qanw

more

Listing

Lahti

6,080 km

Edge banding machine Edgebander Cehisa EP-9

SCM K203E

€5,900

EXW ONO plus VAT

Call

Condition: good (used), Year of construction: 2005, SCM K203E edgebanding machine Very compact machine, inspected by our technician. New tooling included, R=2. Piece thickness 8–55 mm Piece length min. 140 mm Feed speed 10.5 m/min Lrt0fdfqeh Units: - Gluing head - Cutting unit - Edge rounding unit - Edge scraper - Cleaning brushes

more

Listing

Wijchen

(dealership location)

7,087 km

Cehisa EP-9

€3,950

Call

Condition: used, Edge bander Cehisa EP-9 Min workpiece length 120mm Biiepovwdzs Min workpiece width 120mm Min/max workpiece thickness 8/45mm Min/max belt thickness 0.4/5mm Speed 10m/min Required air 6-7bar Total power 3.5kW Dimensions 3380x1800x1250mm (LxBxH), 925kg

more

Listing

Nevers

(dealership location)

7,297 km

EB25

€2,000

STEFANI LOT UNO edgebander complete

Call

Condition: ready for operation (used), Technical characteristics motorized scraper edge length cut workpiece height max: 65 mm - min 11 mm max temperature setting 400 ° C feed speed 4m / min quick settings easy to use without compressed air for pre-glued PVC, melamine and polyester Power and Motors Voltage: 220 V Hguzlnn Overall dimensions

more

Listing

Motta di Livenza

6,576 km

STEFANI Lotto UNO

Call

Condition: good (used), Edgebanding machine with squaring unit with grinders, complete with all units, including automation Machine still in operation Hymmk9neb

more

Listing

HOMAG + TREVISAN VFL610/25/P/A Preforming Profiline

Roreto

6,952 km

Edgebander-PRE-FORMING (DIRECT POSTFORM)

HOMAG + TREVISAN VFL610/25/P/A Preforming Profiline

Call

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Bcyhxw3kz2n Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

more

Listing

Klipphausen

6,545 km

HEBROCK AKV 3006 DK-F

Call

Condition: good (used), Year of construction: 2019, Edgeband thickness max 8 mm Edgeband height max 65 mm Thickness of coiled edgeband max 3 mm Feedrate max 10 m/min Glue system granulate glue pot above feeding chain Quick-change glue pot Spraying device Premilling unit Trimming saw 1 motor B72ghno07o Flush/radius/chamfer milling units 2 Corner rounding unit 1 motor Scraper unit profile and flat Buffing unit Aggregates actuated by control pneumatic Type right-side machine Machine length 5.250 mm Control HEBROCK SPS Proface Panel CE marking Total connection 12,3 kW Space required Length 5.250 mm Width 1.445 mm Height 1.600 mm

more

Listing

Lahti

6,080 km

Edge banding machine Edgebander Biesse Akron 1320

BIESSE Akron 440 A X

Call

Condition: good (used), Year of construction: 2008, We are Penope Oy, official Biesse dealer of Finland. We sell only EXWORKS Lahti Finland. BIESSE AKRON 440A X edgebanding machine Machine is checked by our trained technician and some parts has been replaced by inspected secondhand parts. Tools are included and machine is set to R=1. Pre-milling unit FI-502. - Kit for NC controlled adjustable infeed fence with 4 positions revolver Including NC controlled 4 positions revolver on the 1st copying pad of the Pre- milling unit. - ANTIADHESIVE UNIT ADZ-700 Gluing unit VC-511. - RPT. Edge pressing rollers with temporized intervention. It includes AUTOMATIC adjustment of the working pressure of the edge-guillotine. End trimming unit IN-501V. - PNEUMATIC TILTING OF END TRIMMING UNIT IN-501V. - Independent exclusion and tilting of the two end trimming motors. Bh9dt3viv28 1st TILTING top and bottom trimming UNIT RI-501 - 2 motors 0,65 kW each - PNEUMATIC EXCLUSION of the 2 motors for the 1st Tilting top and bottom trimming unit RI-501. - Double working position AUTOMATIC FAST-RI for 1st RI-501 tilting top and bottom trimming unit. Includes pneumatic exclusion of the 2 motors. Corner rounding unit CR-200V. - SYSTEM FAST FOR THE PRE-SELECTION OF 2 POSITIONS FROM CONTROL BOARD CR-200V. EDGE SCRAPER RBK-502. - Pneumatic exclusion of the Edge scraping unit RBK-502. BRUSHING UNIT SP-501. Other equipments - Numeric Control TS10 with 10'' screen instead of the TS06. - Electronic NC controlled top pressure beam positioning. - Lights inside protection cabin. Also we can offer secondhand Formetal panel returning system for this. Ask for more info.

more

Listing

Wijchen

(dealership location)

7,087 km

Biesse Akron 1320

€9,500

Call

Condition: used, Year of construction: 2013, Edge banding machine Biesse Jade 340 Serial No. 40278 Year of construction 2013 Glue unit Edge trimming unit Fine trim unit Edge scraper unit Poloshing unit Panel height 10-60 mm Height of the edging material 14-64 mm Thickness of material to edgeband in rolls/strips 0.4-8 mm Panel overhang 25 mm Fioa9npf Minimum panel length 150 mm Minimum panel width (with 140 mm length) 85 mm Minimum panel width (with 250 mm length) 50 mm Speed up to 12 m/min. Dust extraction system for each working unit 1 nozzle dia. 100mm Pneumatic connection 7 Bar Glue pot capacity (approximately) 2 kg Warm-up time glue pot at half load (approximately) 10 minutes 400V, 6kW Dimensions 4200x900x1600mm, Weight 1200kg

more

Listing

Nevers

(dealership location)

7,297 km

HOMAG KDF670

€44,000

Call

Condition: ready for operation (used), Technical characteristics Feeding speed 20m / min max Edge height max 65 mm Calibration, gluing with granule pre-melter End cut 2 motors Radial flush and chamfer Copying Band storage NC synchronized aggregate POWER CONTROL 16 control Digitized beam height and advance Snu79 Hauteur de chant maxi65 mm Epaisseur de chant maxi20mm Caractéristiques plaqueuseEnd cut unitBand scraper Power and Motors Overall dimensions Lenght: 6890 mm

more

Listing

Szymbark

5,989 km

Brandt KDF 440 HIGHFLEX 1440

€39,500

Call

Condition: excellent (used), Year of construction: 2016, Brandt KDF 440 HIGHFLEX 1440 Year of manufacture: 2015 Technical specifications - Edgeband thickness max: 8 mm - Edgeband height max: 66 mm - Thickness of coiled edgeband max: 3 mm - Feedrate max: 14 m/min - Continuously variable feed - Electromotoric height adjustment - Preheating zone - Glue system granulate - Premelting unit - Quick-change glue pot - Premilling unit - Trimming saw: 2 motors - Flush/radius/chamfer milling units: 1 - Corner rounding unit: 2 motors - Scraper unit: profile and flat - Buffing unit - Magazine for single strips - Aggregates actuated by control: NC-axes - Type: right-side machine - Quick-change aggregate(s) - Machine length: 5.570 mm - BRANDT PU top pressure rollers - BRANDT A 8 Gluing unit Dmuzxr - Control: BRANDT POWERTOUCH 2 - CE marking

more

Listing

Cantù

6,845 km

FRAVOL RAPID RX 2

Call

Condition: good (used), Code: 0169 Brand: FRAVOL Model: RAPID RX 2 - CE Standard Automatic edge bander for edges in wood, veneer, pvc, melamine, abs, solid wood, formica, and other materials - CE Standard - Year 2008 Technical data: Panel thickness mm 10/60 Blsvmlzi9 Edge thickness mm 0,4 - 16 Minimum panel width mm 60 Variable feed speed mt/min 6/20 Composition: Control with microprocessor (PLC) Gluing unit: glue pot kg 3 Roll edge cutting shear End cutting unit with 2 motors Kw 0,50 - Rpm 12000 - Motor inclination 0-15 degrees Upper/lower tilting trimming unit - Motors Kw 1,1 - Rpm 12000 Protection cabin Removable panel support Installed power Kw 8,8 Suction mouth diameter mm 120 Overall dimensions mm 3100 x 1000 x 1850 h Weight kg 1000

more

Listing

Gheorgheni

5,599 km

EXW ONO VAT not applicable

Bimatic Prima 3.3.A

€9,000

Call

Condition: as good as new (ex-display), Year of construction: 2018, Never used Bimatic edgebander. Min-Max thickness 8-40mm Cf3aacse3v Feeding speed 7m/min minimal dimensions of panel Lxl=60x120mm 1.Glueing 2. End cutting 3. edge milling 4. Polishing

more

Listing

Bad Oeynhausen

6,878 km

Edge banding machine Edgebander Casadei K30/10

HOLZ-HER STREAMER 1057 XL

Call

Condition: good (used), Year of construction: 2019, Edgeband thickness max 6 mm Edgeband height max 64 mm Thickness of coiled edgeband max 3 mm Workpiece length min 160 mm Feedrate max 10 m/min Glue system cartridge Suitable for PUR glue Premilling unit Trimming saw 2 motors Corner rounding unit 1 motor Scraper unit profile and flat Buffing unit Magazine for single strips Aggregates actuated by control pneumatic Type left-side machine Quick-change aggregate(s) Mmy7iyf Machine length 4.930 mm HOLZ-HER GLU JET GJ 301 HOLZ-HER 1918 HOLZ-HER FR 201 HOLZ-HER 1832 HOLZ-HER 1929 HOLZ-HER 1964 HOLZ-HER 1940 Control HOLZ-HER KPL CE marking

more

Listing

Wijchen

(dealership location)

7,087 km

Casadei K30/10

€3,750

Call

Condition: used, Year of construction: 2005, Edgebander Casadei K30/10 Year of construction 2005 Machine No. 3969 Minimum workpiece length 120 mm Minimum workpiece width 75 mm Min/max workpiece thickness 10/45 mm Min/max edge band thickness 0.4/3 mm Speed 7 m/min Jpejnydo3 Total power 3.5kW, 400V Dimensions 2200x800x1300mm (LxWxH), 405kg

more

Listing

Nevers

(dealership location)

7,297 km

SCM S215

€18,000

Call

Condition: ready for operation (used), Technical characteristics feed speed 18 m / min calibration THERMOFUSIBLE glue pre-melt tank tilting end cut Cuy9xktkvh trimming radial flush / chamfer scrapers polishing CN and pneumatic indexing Epaisseur de panneau maxi60mm Epaisseur de chant maxi15mm Power and Motors Overall dimensions

more

Listing

Szymbark

5,989 km

SCM ME40

€14,500

Edge banding machine Edgebander Hebrock EURO 2000

Call

Condition: excellent (used), Year of construction: 2020, SCM me40 edgebander from 2020 for sale. Very good technical condition. The mileage of the machine is 17,000 meters. Possibility to check and test on site. Technical data: Work table dimensions: Working height: 875 mm Element thickness: 8-50 mm Roll edge thickness 0.4-3 mm Maximum thickness of wooden veneer: up to 5 mm Feed speed: 9 m/min Minimum element length: 190 mm Working pressure: 6.5 bar Total heating power: 1.4 kW Operating temperature: ~20 – 190 ºC Glue tank capacity: ~0.8 kg Weight: 545 kg Pre-milling unit: 1 Milling cutter diameter: 80 mm Milling cutter height: 56 mm Cutting unit Engine power: 0.19 kW Bhhazcjz3xe Ball diameter (Z20): 125 mm Milling unit Profile scraper unit Flat scraper unit Free space for a polishing unit - possibility of installing the unit for an additional fee

more

Listing

Wijchen

(dealership location)

7,087 km

Hebrock EURO 2000

Call

Condition: used, Year of construction: 1996, Edgebander Hebrock Euro 2000 Built in 1996 Minimum panel length 250 mm Minimum panel width: 70 mm Min/max thickness of panel: 10/40 mm Min/max edge thickness: 0.4/5 mm Feed speed: 11 m/min Warm-up time about 4.5 min Ckhlemhcb Power Requirement: 415 V - 3 Phase - 20 Amp Isolator Compressed air: 7 Bar Transport dimensions: 3300x1400x1300mm (LxWxH) weight 550kg

more

Listing

Nevers

(dealership location)

7,297 km

CEHISA CEHISA FLEXY P

€14,500

Call

Condition: ready for operation (used), Technical characteristics Composition : Pre-milling unit Gluing unit End cutting unit Milling unit Glue scraping unit Touch screen control Maximum workpiece thickness : 55 mm Maximum edge thickness: 2 mm Feeding speed : 5.5 m/min Extendable parallel bar 5 x 100 mm diameter suction nozzles Juxjfzma0b Power and Motors Voltage: 380 V Pluging: Three-phased Power: 9,8 Kw Overall dimensions Lenght: 2389 mm Width: 1125 mm Height: 1305 mm

more

Listing

Szymbark

5,989 km

Felder G480

€17,800

Edge banding machine Edgebander Comeva Explorer

Call

Condition: like new (used), Year of construction: 2020, Felder G 480 edgebander from 2020 for sale. The machine is like new, only 154 hours, 4,500 meters covered. Possibility to test on site. Technical data - Control panel with LCD display and keyboard - Adjustment for board thickness - Pre-milling unit - Feeding the edges I7zekdprt - Infrared heating lamp - Glue container - Impact guillotine - Pressure unit - Ball cutting unit - Multifunctional milling unit (Felder Quick-Set) - Profile scraper unit - Flat scraper unit - A caterpillar with a chain for feeding the pieces

more

Listing

Wijchen

(dealership location)

7,087 km

Comeva Explorer Super Plus 4TR+R

Call

Condition: used, Year of construction: 2020, Edgebander Complete machine with milling, gluing (with additional heat lamp), trimming, milling, corner rounding, scraping, brushing, additional unit groove cutter for cabinet ledges. 7snt2zt7fm Comeva Explorer Super Plus 4TR+R Year of construction 2020 Lace band thickness 0.4 - 3 mm Workpiece length min/max. 120mm/unlimited Workpiece width min./max. 80mm/unlimited Workpiece thickness 8 - 50 mm Throughput speed 4 - 15 m/min Dimensions 6670x1115x1665mm (LxWxH), weight 1800 kg

more

Listing

Nevers

(dealership location)

7,297 km

BIESSE JADE 225

€18,900

Edge banding machine Edgebander Holz-Her Sprint

Call

Condition: ready for operation (used), Technical characteristics Panel thickness 10 to 60 mm Edge thickness 0,4 - 3 / 8 mm Minimum panel length 150 mm Calibration Gluing End cutting Trimming Rounding Radius scraper aggregate Glue scraper Brushing Power and Motors Power: 8.6 Kw Overall dimensions Weight: 1600 Kg Gktyxte2

more

Listing

Wijchen

(dealership location)

7,087 km

Holz-Her Sprint 1321

Call

Condition: used, Year of construction: 2006, Edgebander Holz-Her Sprint 1321 Year of construction 2006 380V Pre-milling unit (1961), 2x2.0kW, 12000 rpm Multi Glue System (1905), For EVA and PUR adhesives in cartridge and granular form. Pressing Unit (1913), Fitted with a pneumatic guillotine Miter saw unit (1918), 2x 0.35 kW 9000rpm,Tiltable from 0 to 10 degrees Angle milling unit (1942), 2x0.6kW, 18000 Rpm, tiltable from 0 to 15 degrees Radius scraper (1929), max R3 Flat scraper (1964), arranged separately above and below Edge thickness 0.4 - 15 mm Rim height 65 mm C9wlz8m Min cutting edge length 350 mm Workpiece width min. 60mm Workpiece length min. 180mm 5500x1000x1700mm (LxWxH), +/- 2500kg

more

Listing

Nevers

(dealership location)

7,297 km

HOLZHER SPRINT 1417K

€14,000

Edge banding machine Edgebander Hebrock EURO 2000

Call

Condition: ready for operation (used), Technical characteristics Feeding of thin to thick edges = 0.8 to 3 mm Strips and rolls: ABS, laminates, wood, composites, etc. Edge height : 51 mm max Edge thickness : 8 mm max Minimum length of pieces : 350 mm Piece feeding 11m/min Composition: Edge magazine (1903) Pre-milling (1961) Cartridge gluing (1906) End cutting (1918) Form milling (1942M) Glue scraping (1929) Edge scraping (1964) Polishing (1944K) Power and Motors Pluging: Three-phased Overall dimensions Lenght: 5945 mm Width: 1144 mm Bo2os8kh Height: 1730 mm Weight: 1860 Kg

more

Listing

Wijchen

(dealership location)

7,087 km

Hebrock EURO 2000

€4,800

Call

Condition: used, Year of construction: 1999, Edgebander Hebrock Euro 2000 Built in 1999 Minimum panel length 250 mm Minimum panel width: 70 mm Min/max thickness of panel: 10/40 mm Min/max edge thickness: 0.4/5 mm Feed speed: 11 m/min Warm-up time about 4.5 min Power Requirement: 415 V - 3 Phase - 20 Amp Isolator 70cldgaaj Compressed air: 7 Bar Transport dimensions: 3300x1400x1300mm (LxWxH) weight 550kg

more

Listing

Nevers

(dealership location)

7,297 km

Onesided edgebander

HOMAG KDF 670 2C OPTIMAT

€41,000

Edge banding machine Edgebander SCM IDM ACTIVA-88

Call

Condition: ready for operation (used), Technical characteristics glue tank for HOTMELT glue in granules, possible use of PU glue in granules under the conditions of use two directions of rotation of the glue roller: direction of advance or against advance PC 16 electronic control: BRANDT control system with color graphics modem for remote diagnosis soundproof booth max feed speed 14m / min pneumatic connection 6 bar lighting inside the hood motorization of the pressure beam adjustable entry guide motorized adjustment of the entry guide motorized pressure zone adjustment QUICKMELT gluing unit dressing unit 200 Hz 2 x 2.2 kW 48 mm diamond router bit set chamfer / straight end cutting unit 2 x 0.35 kW blowing device trimming unit 2 x 0.55 kW 0-25 ° counterflow motorized adjustment of the side probes Bd3fh3ylck pneumatic control of the trimming unit path-controlled blowing device trimming unit 2 x 0.55 kW 0-25 ° advance path-controlled blowing device top and bottom form milling unit scraping unit with quick change pneumatic control for scraping 5760/5736 2-motor buffing unit interface for LIGMATECH ZHR 01 / ZHR 02 / ZHR 15 Epaisseur de panneau maxi60mm Epaisseur de panneau mini8 mm Epaisseur de chant maxi12mm Epaisseur de chant mini0.4 mm Caractéristiques plaqueuseDigitized commandGlue tankEnd cut unitAffleurageBand scraper Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Overall dimensions Lenght: 6860 mm

more

Listing

Wijchen

(dealership location)

7,087 km

SCM IDM ACTIVA-88

€7,500

Call

Condition: used, Year of construction: 2005, Edgebander SCM IDM ACTIVA-88 Automatic feeding system Speeds 12/18 m./min. Crossing the panel over the chain Standard straight 30 mm With C1+C2, RCS 99/A MULTIPLA, TG 35 mm Panel thickness 10-60 mm Min. panel width 90mm Dimensions 10000x1800x1800mm, weight 3500kg More information can be found in the attached document. 70df7p0is Document not visible? Request it by email.

more

Listing

Nevers

(dealership location)

7,297 km

SCM K203 TE

€12,000

Edge banding machine Edgebander IMA

Call

Condition: ready for operation (used), Technical characteristics Calibration of 2 diamond tool holders Gluing with hot melt glue tray Automatic edge feeding Pressure group Tiltable end cutting Straight / chamfer / 1/4 round trimming Edge scrapers Brush Cuy9uuyya8 Capacity : panel thickness 50 mm edge thickness roll 0.4 - 3 mm edge thickness strips 8 mm Feed 10m/min Power and Motors Overall dimensions Lenght: 3700 mm

more

Listing

Wijchen

(dealership location)

7,087 km

IMA Compact/U/PC/F/DV/6620

€6,500

Call

Condition: used, Year of construction: 2000, Edgebander IMA Compact/U/PC/F/DV/6220 Year of construction 2000 Serial number 06645 Panel thickness 45 mm Lace band thickness 20 mm Edge band height 55 mm Min. workpiece length 150 mm Min. workpiece width 60 mm Throughput speed 20 m/min Saw unit Pre-milling unit Milling unit Circular unit Scraper unit Cleaning unit Including return transport Ligmatech ZHR 15 Year of construction 2000 Serial number 0-305-99-0257 Equipped with digital control panel Connection 400 V Manual available Machine weight 3150 kg Including accessories, see photos Chw0yyjn8g Set up dimensions 10500x2650x2000mm (LxWxH), weight 3150kg

more

Listing

Nevers

(dealership location)

7,297 km

SCM K203 T-ER

€18,000

Edge banding machine Edgebander Biesse Akron 850

Call

Condition: ready for operation (used), Technical characteristics Calibration Cutter and edge feeder Hot melt glue tray End cutting Trimming Angle copying Scrapers Brushes Panel thickness 8-55 mm Edge thickness 8 mm Feed rate 10 m/min Complete and compact machine Power and Motors Pluging: Three-phased Overall dimensions Lenght: 4500 mm Width: 1300 mm Weight: 1050 Kg Pyztyy

more

Listing

Wijchen

(dealership location)

7,087 km

Biesse Akron 850

Call

Condition: used, Year of construction: 2008, Edgebander Biesse Akron 850 Year of construction 2008 Minimum panel length 140 mm Minimum panel width: 85 mm Min/max thickness of panel: 10/60 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10/14/20 m/min Compressed air: 7 Bar Te2uzi7n Power Requirement: 415V - 3 Phase Transport dimensions: 6500x1200x1600mm (LxWxH) weight 1200kg

more

Listing

Nevers

(dealership location)

7,297 km

IDM - C3109

€9,000

Edge banding machine Edgebander Hebrock - EBM KDP

Call

Condition: ready for operation (used), Technical characteristics Bgchebd3jse Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

more

Listing

Wijchen

(dealership location)

7,087 km

Hebrock - EBM KDP 112 SLK

€3,950

Call

Condition: used, Year of construction: 1999, Edgebander Dlz7vv Hebrock EBM EBM KDP 112 SLK Year of construction 1999 Minimum panel length 260 mm Minimum panel width: 90 mm Min/max thickness of panel: 10/45 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10 m/min 400V, 11.5kW Transport dimensions: 3200x900x1300mm (LxWxH) weight 600kg

more

Listing

Nevers

(dealership location)

7,297 km

HOMAG KDF 530 C

€22,000

Edge banding machine Edgebander Kenar FP 250

Call

Condition: ready for operation (used), Technical characteristics Part thickness : 8 to 50 mm Huzongs Edge thickness: 0.4 to 8 mm Programmable control with group indexing Feed rate 11 m/min Composition: Edge insertion device Milling unit (straightening) Pre-melting device Edge magazine End cutting unit Milling unit (flush) Form milling unit Surface scraping unit Polishing brushes Suction nozzles : 1 x ⌀ 120 mm / 3 x ⌀ 60 mm / 1 x ⌀ 100 mm 6 bar pneumatic system Compact and complete machine Power and Motors Voltage: 400 V Pluging: Three-phased Power: 10,5 Kw Overall dimensions Lenght: 4860 mm Width: 900 mm Height: 1610 mm Weight: 2000 Kg

more

Listing

Wijchen

(dealership location)

7,087 km

Kenar FP 250

€1,950