Used Sanding for sale (1,893)

Condition: excellent (used), Grinding width: 700 mm Maximum material height: 150 mm 9 kW motor Oscillation on both shafts Lsdezvx Nyopfx Akmoru

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Lrodpsz A H Eysfx Akmju Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 1,100 mm, working height: 160 mm, type of input current: three-phase, input voltage: 380 V, OTT RS-O 110 Wide-Belt Calibrating and Sanding Machine Used industrial wide-belt sanding machine manufactured by OTT. The machine is equipped with two sanding units and is suitable for calibrating, pre-sanding, and fine sanding solid wood, furniture components, and panel materials. Technical specifications: Manufacturer: OTT Model: RS-O 110 Year of manufacture: 1979 Machine number: 354 Maximum working width: 1,100 mm Maximum workpiece height: 160 mm Number of sanding units: 2 Total installed power: 30 kW Power supply: 380 V Feed speeds: 2 Operating pressure: 8–10 bar Dust extraction connections: 2 × Ø 200 mm Approximate dimensions: 2,230 × 2,020 × 2,050 mm Approximate weight: 3,000 kg Machine configuration: Lrodpfxoz Dxkde Akmju Grooved rubber calibration roller Pneumatic sanding pad with metal rollers Pneumatic sanding-belt oscillation with photocell control Electrically adjustable working table Integrated cleaning brush Industrial heavy-duty construction The machine is offered in used condition. Its actual condition, equipment, control panel, and internal components are shown in the photographs. Inspection is possible by prior appointment. Location: Gātciems, Latvia Loading assistance can be provided. European transport can be arranged upon request. Price: EUR 2000 net, excluding VAT.

Condition: used, Year of construction: 1989, With sanding units consisting of: - 1 calibration roller - 1 combination unit with rigid pad Used Manufacturer: SCM Ledpfxjy H N Taj Akmeru Model: UNO C-CS Year of manufacture: 1989 Machine no.: AE005036 REF.: 030514 Sanding width: approx. 920 mm Pass-through height: approx. 3-160 mm Number of units: 2 pcs., 1x15 kW Units from above: 2 pcs Belt dimensions (L x W): 1525 x 930 mm 2x feed speed: 4.5 / 9.0 m/min 1 pc calibration roller - grooved / rubber-coated 1 pc combination unit with rigid sanding pad - rubber-coated roller Extraction connection: D 2 x 160 mm Required space: approx. 1600 x 1500 x 1800 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-is condition as inspected, without warranty or guarantee

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, COSTA wide belt grinder, two-roller model, 1350 mm roller width. The machine features a contact roller and a finishing polishing platen. Lrodpey Tx Exsfx Akmju

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Workpiece thickness min./max. 3–150 mm Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Roller table at the inlet Ljdpfxjzk Nlbs Akmoru Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: at short notice Location: Röllbach

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes Lrjdjzcmcvjpfx Akmsu 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2017, functionality: fully functional, pressure: 10 bar, tank capacity: 200 l, overall weight: 113 kg, hose package length: 10,000 mm, Manufacturer: Szatkowski s.c. Type: OP-1/200 Year of manufacture: 2017 Factory number: 627 Working pressure: 14.3 bar Lredpfxsz E D Dre Akmou Test pressure: 10 bar Capacity: 200 l Medium: air + abrasive material Maximum operating temperature: 50°C Minimum operating temperature: -10°C CE 1433 Tank manufactured by PPU KOMNINO.

Condition: used, Year of construction: 2002, Working width: 1100 mm Working height: 140 mm Lredpfx Akez E Hm Nsmsu Min. workpiece length: Height adjustment: electric Workpiece thickness display: digital Units: 1 1st unit: Combination unit (roller - pad) with electronic segmented grinding pad Dust removal brush: no Motor power: 15 kW Dust extraction connection: 200 mm Machine length: 1800 mm Machine width: 1800 mm Weight: 1000 kg

Condition: used, Year of construction: 1980, used, good conditionMake JohannsenType T82KYear of construction 1980MachineNo. 14262GS-testedmotor 5.5 kWbelt length approx. 7800 mm x 150 mmtable size approx. 2800 mm x 900 mmcrank right approx. 850 mmupper belt coverupper grinding supportright-left runsuction connection D 180 mmweight approx. 900 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Ljdpfx Akovwfdkjmsru

Condition: used, usedmake Löserbelt unit 1motor 1 / 1,4 kWspeed 2 speedssuction connection own suction 0,44 kWspace requirement approx. 1400 mm x 800 mm x 1700 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Ledpfxevwfwkj Akmjru

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Lodpfx Asxxlz Uekmeru

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush Lredpfexfl Easx Akmou max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated dual dust extraction system Sanding belt 75 x 2000 mm Working width: 75 mm Motor: 4.1 HP Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models with dual dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built to the strictest environmental and safety standards. The belt sanders are equipped as standard with a motor brake, adjustable work height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Ledpfx Akeflt Amjmeru Eye protection The continuously adjustable work height enables an ergonomically correct working position. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: excellent (used), MAWEG SATURN DUO grinding machine Lsdpsf N Nflsfx Akmjru - after the technical review - very good condition - belt length 1800 mm TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg

Condition: new, Bernardo HV 80 OSZI edge grinding machine Work table: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Belt backing: 950 x 200 mm Grinding unit lockable at: 90° / 0° Belt speed: 16 m/s Auxiliary table: 300 x 250 mm Dust extraction connection: Ø100 mm Roller diameter: 110 mm Motor output power: S1 100% 1.5 kW (2.0 HP) Motor input power: S6 40% 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Weight approx. 148 kg Ljdpfx Asd Tb U Sokmjru

Condition: new, Bernardo Belt Sander MS 75 x 2000 S-2 Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel Ø x W: 200 / 80 mm Planing sanding table: 460 x 75 mm Dust extraction connection Ø: 100 mm Motor output S1 100%: 1.5 / 2.2 kW Motor input S6 40%: 2.2 / 3.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 67 kg Scope of delivery • Sanding belt K 80 • Foldable protective shield • Sanding and support table Lrodpfx Aked Du S Usmju • Workpiece stop • Dust extraction nozzle • Motor circuit breaker • Rubberized sanding roller • Graphite lining • Separate on/off button • Base frame

Condition: new, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm Lrodpfxjrmucxo Akmou sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Year of construction: 1988, condition: good (used), table dimensions 2500x800mm built-in extraction 4kW engine electric adjustment of the table up / down Lrodpfx Aoih H Eaekmeu power supply 380V

Condition: new, Year of construction: 2024, table length: 1,450 mm, table width: 500 mm, overall weight: 550 kg, input voltage: 400 V, oscillation stroke: 20 mm, input frequency: 50 Hz, OBS 150 ARCO edge sanding machine. NEW. Sanding height 150 Oscillation stroke 20 mm Machine length 1450 mm Front side of the processing side is curved Table spread (adjustable) Rear side for straight processing. Table tiltable up to 45 gr. Motor power 2.5 kW, 2 speeds. Sanding speed 11.5 and 8 meters/sec. Central extraction Diam 140 mm. Lrjdpfxjr Erhws Akmsu Pneumatic tensioning of sanding belt. The machine is very suitable for staircase manufacturers.

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders Lsdpfx Aszlxp Sjkmoru • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Used Machine Year of Manufacture: 1976 Features and Technical Specifications: - Grinds from below - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure bar - Electric adjustment of tool thickness with an easy-to-read digital display - Pushbutton with contactor control - Grinding width: 1350 mm - Workpiece thickness: max. 150 mm - Grinding belt width: 1360 mm - Grinding belt length: 1900 mm Lrjdpezk Nyrefx Akmsu - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Motor power: 17.5 kW Dimensions: 1800 x 1100 x 1520 mm Weight: 2600 kg Availability: Immediate Location: Röllbach

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Lrsdpsz Eq Epjfx Akmou Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, functionality: fully functional, Equipment: compressor, We are offering this very well-maintained Joke Microjet2 fine jet blasting machine, manufactured in 2025, including a maintenance-free compressor, also manufactured in 2025, and the dust collector for the blasting system. The blasting machine and compressor have a combined operating time of approximately 5-6 hours. Lrjdpsz I Dyxofx Akmou The oil-free compressor is from Cleanair, and the dust collector is also from Joke. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Lrjdpfxjzp D Eao Akmsu Weight kg 2500