Used wide belt sanders 1300-1499mm working width for sale (126)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm Lsdsx Tt Uuopfx Adwsrg MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz Lredpfeych Igox Adweg 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz Ledpfx Asychqzedwerg 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Lrjdpoybawkofx Adweg No. Operating units: 2 Nr

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW Lsdpfx Adex U Urqswsrg - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 1,350 mm, Wide belt sanding machine for woodworking Manufacturer: Viet, Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data Manufacturer: Viet Italia S.r.l. Model: SV3-4.3 RVXR Year: 2020 Belt width: 1350 mm Maximum working height: 160 mm Machine with adjustable head (fixed working height of 900 mm) Lredpsya Eyhjfx Adwjg Feed speed: 1.1 kW (1.5 HP) Speed: 0.5–7 m/min Calibration sanding unit, sanding drum diameter: 190 mm Belt length: 2620 mm Dimensions: approx. W 2.2 x D 3.5 x H 2.5 m (+ dust extraction) Weight: 6.5 t (+ dust extraction) Features – Machine with movable head – Sanding belt change on the left side – Tool set – Digital thickness display – Material too strong at the infeed – Electropneumatic oscillation control – Air filter with condensate separator and automatic drain – Maintenance-free pneumatic system – Pneumatic lifting and lowering when switching sanding units on or off – Machine with head adjustment (fixed working height 900 mm) – Lifting system on 4 columns (spindle) with chain drive – Table extension front and rear, each with 1 roller – Industry 4.0 (LAN) package with LAN network connection – Centessimal lifting system with inverter – Electromechanical grit set – Belt speed adjustable via frequency inverter – V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in line and moving in opposite directions. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. – 16 support plates for V-Spin unit, diameter 80 mm Scotch-Brite + abrasive, grit 80 – 16 support plates for V-Spin unit, diameter 80 mm Tampico + grit 80 – X-Spin unit / sanding system with 15 discs, diameter 123 mm Group consists of 5 rotary heads, each fitted with 3 rotating sanding brush pads, each diameter 123 mm – Oscillating Scotch-Brite brush – Linear cleaning systems – Conveyor belt Conveyor made of HYPALON rubber, heat and oil resistant, hardness 60 SH, smooth surface – Belt cleaning blower for the transport belt incl. extraction – IPC MONITOR 15" touch-screen control for machine operation, up to a maximum of 10 processing units – 2 Euro pallets filled with new sanding belts – Technical documentation including operating manual The control system manages the following processes: - Start sequence of selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of thickness control - Acoustic and visual notifications at machine startup - Operating hours counter - Automatic control of feed speed depending on processing capacity (indicated in sqm). This functionality enables increased sanding belt lifetime through the use of statistics. Extraction Unit - Manufacturer: Ringler, Kärcher Group - Model: RE 36/110 D11 IE3 - Output: 11.0 kW - 2930 rpm - Connection: 400 V / 19.54 A / 50 Hz - Year: Dec 2018 - Weight: 754 kg All information without guarantee. A demonstration is possible anytime in our showroom.

Condition: used, Year of construction: 2008, Boere Select 1300 KC Widebeltsander (contactrol + combi) Description Number of sanding units: 2 Lodpfxew Emwms Adwerg Type of units: 1 contact and 1 combi aggregate Sanding width: 1300 mm Number of engines: 2 Throughput: 4-15 mtr./min Vacuum table: No Motor power: 15 kW Extraction diameter: 250 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2001, Ott Deltatronic Wide Belt Sander €9,500.00 excl. VAT Ott Deltatronic Magelis control system Sanding thickness: 3-160 mm Sanding width: 1350 mm 3 units Lrodpfxsyatgio Adwjg Lacquer sanding package Vacuum Satin finishing brush Cleaning brush Pneumatic slider Year of manufacture: 2001 Condition: Fully functional

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units Lsdpfx Aed E Ixzedwsrg • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding of soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Sanding of blocking foils with graphical control terminal Lrodpfxox Rpgho Adwjg NC-controlled thickness adjustment from 3-150 mm Calibration roller can be switched on via terminal with patented CSD segmented pressure beam to compensate for workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency controlled: approx. 2-18 m/sec Motor power (sanding unit): 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt cleaning air blast: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (WxDxH): 2090x1670x2020 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2006, lower grader with 2 lower belts RR 1300 2 lower rollers upper grader with 2 upper belts RR 1300 2 upper rollers Lrodjycxwfspfx Adwsg

Condition: new, Technical data: Working width mm 1.350 Min./max. working height mm 4 - 170 grinding belt width/ length mm 1.370/ 2620 Main motor power kW 15,0 with inverter Feed speed variable m/min 3,5 - 18 Working aggregates: 1st unit: "RA" inclined ribbed steel contact roller diameter 160 mm 2nd aggregate: Combi: rubber coated grinding roller diameter 160 mm, 45 Sh Elastic electronic link sanding shoe "MESAR" with 24 segments Version C: - Elastic electronic sanding shoe "MESAR" complete with: - Pneumatic cylinder (On/Off) for the automatic on/off of the sanding roller sanding shoe unit - Activation of the sectors by the electronic control which synchronizes their insertion with the feed speed and controls the number of sectors according to the workpiece geometry. and allows the selection of more or less sectors on the left and on the right side of the workpiece. Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar in the infeed. Other equipment: Ledehtuvropfx Adworg Roller table in infeed and outfeed for long workpieces Perforated table and transport carpet Vacuum table with electric fan 4 kW (5,5 PS ) integrated in machine frame Oscillating blow-off device 2nd unit Touch screen 10,4" screen with 'eye S software integration ATTENTION: PICTURES are EXAMPLE PICTURES OF A SIMILAR SD70!

Condition: new, Year of construction: 2026, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package Ledpfx Ajr Hr Dzodwjrg A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Costa Planing Machine High-Performance Profiling Planer – Processing Centre with 10 spindles, used exclusively for processing spruce wood. Technical Features: - Working width up to 300 mm - Multi-stroke spindle system for flexible profiling and dimensional processing - Feed rate: 140 m/min to 200 m/min - NC control for precise, repeatable set-up and processing operations - All spindles equipped with support bearings (hydraulic clamping) for smooth operation, dimensional accuracy, and surface quality - Planing table in perfect condition, showing no signs of wear or damage - Precision work in terms of dimension and angle across the entire working width - The machine is in technically flawless condition and operates precisely and reliably. Lrodpsx N D Rrjfx Adwsg Spindle Configuration: - Horizontal spindle - Lifting spindle right, vertical - Lifting spindle left, vertical - Lifting spindle horizontal - Lifting spindle right, vertical - Lifting spindle left, vertical - Spindle top, horizontal - Spindle bottom, horizontal - Spindle bottom, horizontal - Levelling spindle bottom, horizontal This spindle arrangement enables complete machining of workpieces in a single pass with high dimensional accuracy and excellent surface quality.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Technical Main Data - Grinding width: 1,350 mm - Working height: 900 mm (constant) - Workpiece thickness: max. 150 mm - Abrasive belt width: 1,370 mm - Segment grinding shoe - Weight: approx. 3,000 kg Drives 1st unit: 15–18.5 kW, belt speed 18 m/s 2nd unit: 11–15 kW, belt speed 18 m/s Contact roller diameter: 140 mm (combi unit) Ledpfx Adsxmwn Aowsrg Feed: - Feed belt system: length 3,400 mm, width 1,350 mm - Feed drive: 0.7/0.9 kW (2 speeds) - Feed speed: infinitely variable, 2.5–13 m/min Extraction - Air velocity: min. 20 m/s - Machine resistance: approx. 800 Pa Compressed Air: - Operating pressure: 6–8 bar - Air consumption: approx. 28 l/min

Condition: used, Wide belt calibrating sander Manufacturer: Viet Spa Italia Model: PL ICCC Year: 1995 Power: 54 kW Ledpjx N T Efsfx Adwjrg Air pressure: 5–8 bar Weight: 6200 kg

Condition: excellent (used), Year of construction: 2006, BOERE Sandrite 1100 KC Sanding machine. Year of Manufacture - 2006. Machine is in excellent working condition. £8,450 + VAT Ex-Works. 2 x Main motors. Pneumatic belt tension. Maximum Workpiece: 150mm Belt size: 1110 x 1900mm Feed Speed: 4.4M/Min Variable upto 12M/Min Lredpfoya Ilajx Adwsg Hard Robber roller on first head, In great condition. (Calibration). Combi Second Head, Soft Roller & Pneumatic Pad. (Solid Wood finish). Machine is connected and available for any demonstration.

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sanding machine Condition: function-tested – Working width 1300 mm – Cross sanding unit with belt air-jet cleaning device – Longitudinal sanding unit with steplessly adjustable speed and belt air-jet cleaning device Lrjdpox N A Aasfx Adwjg – Calibrating roller, controllable via control panel – Vacuum conveyor belt – feed speed steplessly adjustable – Satin finishing roller – Brush roller – Machine settings and pressure regulation system CNC-controlled - EA dedusting unit, high-pressure air-blast installation with rotating nozzles and ionization for statically charged dust Location: ex customer site - Immediately available - Machine must be dismantled by the customer

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, input voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Lrodpovxu E Hsfx Adwjg Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total height: 2,200 mm, total length: 2,750 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,580 kg, grinding height: 160 mm, type of input current: three-phase, grinding belt length: 1,620 mm, workpiece width (max.): 1,350 mm, Wide Belt Sander VIET Challenge 323B Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – VIET • Model – Challenge 323B • Working width – 1350 mm • Sanding thickness range – 3-160 mm • 3 sanding units: - First: calibration roller made of hard rubber - Second: rubber roller made of lower hardness rubber, with jump-in/jump-out function Ljdpfx Adex Nw Spewerg - Third: soft rubber roller, also with jump-in/jump-out function • All rollers diameter: 240 mm • Possibility of working with jump-in operation on the 2nd and 3rd roller or in manual mode with fixed height setting • Main drive motors: 2 x 11 kW • Machine is operated via a touchscreen panel with memory for saving various programs and settings as required • Display with fault and error messages • Infinitely variable conveyor feed speed – variator • Electronic thickness indicator for processed elements • Air-blast cleaning mechanism for sanding belts on 2nd and 3rd unit • End-switch controlled oscillation (reliable) • Conveyor belt in very good condition • Table extension rollers • Sanded material thickness gauge • Safety sensor preventing oversize material from entering • Original paintwork • Abrasive belt size – 2620 x 1380 mm • Extraction ports – 7 pcs. • Weight – 3,580 kg • Year of manufacture – 2002 • Complete Italian-language manufacturer’s documentation • Overall dimensions 270 x 225 x 220 cm (L x W x H) Additional information: • Perfect, factory technical and visual condition • The provided photos show the actual condition of the item for sale • Device can be switched on and fully tested on site

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Lsdpfxoxxlz Uo Adwsrg

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Lrjdex Rdn Tspfx Adwsg Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: used, Kündig Premium-2 1350 RP Quality product from Switzerland Constant Table Machine / Automatic Head Positioning Wide-Belt Calibration & Fine Sanding Machine 1st Unit: Grooved Rubber Contact Roller, 80 Sh Contact Roller Level Infinitely Adjustable According to Grit Scale 2nd Unit: Pneumatic Sanding Pad Unit Abrasive Belt Drive Motor Power: 15 kW Working Width: 1350 mm Maximum Workpiece Pass-Through Height: 200 mm Feed Speed: 3 - 15 m/min, Infinitely Adjustable Automatic Workpiece Thickness Setting ENORMATIC Quick Adjustment with Feed Activation (for long workpieces) PLC Control with Touch Screen and Teach-in Memory for Automation and Management of All Work Programs Infeed and Outfeed Tables with Roller Support Additional Foldable Outfeed Table Lsdpex A T Epefx Adworg Machine is KÜNDIG – FACTORY SERVICED First delivered in 2018 from training workshop / retirement Few operating hours Available ex stock Lieboch / Leasing option

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Bottom sanding - Material feed via rubber rollers - Contactless oscillation control - Quick-change pressure beam - Electromotive adjustment of tool thickness with easily readable digital display - Pushbutton with contactor control - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Roller feed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Availability: short-term Storage location: 63934 Röllbach Lrjdpswpm I Tjfx Adwog

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation Lrjdpfx Aex Hll Ejdweg · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg