Used Scm Dmc Sd 60 for sale (4)

Condition: as good as new (ex-display), functionality: fully functional, BASIC FEATURES: Base and desk * steel structure with electric cabinet on the front of the machine * introduction to sanding belts on the left side of the machine * electrical adjustment of working thickness Tjdpfxsqw Uz Ie Ac Njf * main engine located inside the base ----- TECHNICAL DATA: 110 Version Working width mm 1,100 min./max. piece thickness mm 4-170 Sanding belt width mm 1,115 Length of sanding belt mm 2,150 Main engine power kW (HP) 11 (15) Conveyor belt motor power kW (HP) 0.45/0.8 (0.6/1.1) Conveyor belt speed m/min 4.5/9 ----- The price of the machine does not include: - Transportation - Unloading - Assembly - Training - Processing tools - VAT

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Tjdpfx Acjvwfrno Nsf

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm Todpetwqn Ssfx Ac Nsf min./max. working height 4-170 Sanding belt width 1,370 mm Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - anti-kickback device in the infeed before the first unit - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle motor power 11 kW This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Application Types Todpfx Asw R E Imoc Njf Sanding