Used Scm 2200 for sale (658)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Rcjdpoz Rz Hvsfx Airoh

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Rcsdpfx Aez Ef Ifjirjh Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. Rcedpfozzx Iyjx Airjh The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Rsdpez Iyvpjfx Airjch

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 Rsdpfx Ae Afnhhsirech - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor Rsdj Afbuhepfx Airjch + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Rcjdpfxs Af Ig Uj Aireh Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, overall weight: 4,795 kg, SCM WINDOR 20 corner processing center for machining wooden frames (windows and patio doors). It performs mortising, profiling, and hardware/glazing bead machining in a single pass, with automatic workpiece return, allowing a single operator to handle the entire process. Redpfx Aio Afwtveroch Complete with a toolset for 68mm windows.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Redpfs Ad Hatex Airjch Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Rcjdpfx Aio Aduqajreh Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: Rcodpfx Aiszvb Uxoreh * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 107 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 4,070 kg, Equipment: documentation/manual, We offer this used SCM Casadei Axo 400/38 panel saw, manufactured in 2019. Rcsdez R Su Sepfx Airjh Brand: SCM Casadei Sempre Serial number: AE00000295 Type: SEZ.MON.2 Model: AXO (Passat) 400/38 Year of manufacture: 2019 Weight: 4070 kg Rated voltage: 400 V Number of phases: 3 Current: 40 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Rjdpfx As Aflwyoirech

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018801, functionality: fully functional, power: 9.5 kW (12.92 HP), workpiece length (max.): 3,086 mm, workpiece width (max.): 2,155 mm, overall weight: 3,841 kg, year of last overhaul: 2016, Equipment: CE marking, documentation/manual, We are offering this ready-to-use SCM Pratix S22 machining center, manufactured in 2016. The machine features a 9.5 kW spindle (max. 24,000 rpm) and an F12 2.2 kW drilling unit (12 independently operated). Rcjdoz Sp N Uopfx Aireh The machine can be viewed in operation in October and the first week of November 2026. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Rcjdpfxex Nc Ayj Airjh Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AH00001546, functionality: fully functional, operating hours: 6,898 h, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 22 m/min, actuation type: electric, total length: 7,000 mm, overall weight: 3,121 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, INTERIOR 46 DESIGN Ltd. – Ruse offers for sale: Rcsdpfx Ajzki Dkoirjh SCM – Stefani MD straight-edge edging machine – manufactured in 2019. The machine was purchased new and used for 5 years in the production of custom-made kitchens. In perfect technical condition. Fully serviced and maintained by SCM Bulgaria. The machine is located in the SCM showroom in Varna. Inspection and testing on-site are possible.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, input current: 59 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 170 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,380 mm, workpiece height (max.): 170 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 2,300 mm, total length: 6,000 mm, total width: 2,100 mm, overall weight: 3,840 kg, table length: 3,300 mm, table width: 1,400 mm, Equipment: CE marking, documentation/manual, AUTHOR M200 CNC MACHINING CENTRE GENERAL FEATURES Panel passage: 180 mm on H50 devices AXES SPEED: X = 90 m/min (with Pro-Speed safety device) X = 25 m/min (with Pro-Space safety device) Y = 90 m/min Redoz Eakbepfx Airsch Z = 30 m/min MOTORIZED CHIP CONVEYOR PROGRAMMING SOFTWARE XILOG MAESTRO 3D – the new powerful software developed by SCM Group – is the software for programming MORBIDELLI’s machining centres. • Visualization in 3D graphic mode of the workpiece, geometries, machining operations, and worktable; • Available: shading mode with different shading levels, wireframe mode, rendering visualization, geometry visualization, and toolpath visualization (CAM); • Zoom function, general functions, and visual aid for the workpiece; • Sketching function for inputting geometries, thus creating drawings (CAD) with a preview. Serie 200 working area: 3050 X 1380, N. 1 LASER FOR EASY CUP POSITIONING, N. 1 GROUP 600 - PRISMA KT (11 KW - 18,000 RPM), N. 1 The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality, even with high material removal rates. Characterized by a specific configuration with axes rotating at 50°, the Prisma machining head offers several advantages over traditional 5-axis machining units, such as: • Full use of machining areas, both with 5 axes and with a vertical spindle. • Spindle overall dimensions are kept outside the working area. • Very streamlined spindle design in the case of horizontal machining. The machining head is equipped with an 11 KW “High Speed” electrospindle and has a centralized exhaust system with automatic activation/deactivation of airflow on the working units. Technical specifications: Routing unit with 5 interpolating axes Electro-spindle with HSK 63F quick-release tool holder Rotation speed: 600-18,000 rpm Right and left rotation Power: 11 KW at 16,000 rpm (on S1 duty) 15 KW inverter C-axis rotation = 640° B-axis rotation = 270° C-axis equipped with a TTS locking system (Total Torque System – patented by SCM) “For life” grease lubrication Liquid cooling with a heat exchanger PRESET FOR ANGULAR HEADS on PRISMA KT SPINDLE, N. 1 52.22.71 DRILLING UNIT F26L2 (14V-40X-40Y-L0/90), N. 1 Drilling unit equipped with vertical displacement on an independent Z axis. Technical features: • No. 14 independent VERTICAL spindles • No. 6 horizontal spindles in the X direction • No. 4 horizontal spindles in the Y direction • On/off pneumatic vertical stroke of any spindle: 60 mm • Bit attachment: 10 H7 • Max. bit length: 70 mm • Adjustable rotation speed from 2,000 to 8,000 rpm, controlled by an inverter • Motor power: 3 kW • Integrated blade with independent vertical displacement and 0-90° rotation • Blade diameter: 160 mm (max) Features: Number of tools on board: 16 (max) Max. tool diameter on board: 300 mm (3 axes) Max. tool diameter on board: 350 mm (5 axes) Centre-to-centre distance between positions: 85 mm Single tool weight on board: 8 kg (max) Total weight of tools installed: 48 kg (max) TOOL ROOM, 10 positions, on the right side, N. 1 52.21.97 250(108) M3/H 50(60) HZ - VACUUM PUMP, N. 1

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Rcedpjzwg H Ajfx Airoh Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: AH/117989, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,200 mm, number of axes: 4, Usable work area X-axis = 3,086 mm Y-axis = 2,155 mm Z-axis = 100 mm C-axis for tool heads Work table: Slatted table with a phenolic resin base, grid 30 x 30 mm Multi-zone vacuum system WORKING UNITS Rcsdpfxo Af Aare Aireh Drilling unit Vertical spindle in X - 5 Vertical spindle in Y - 2 Motor power 2.2 kW Milling spindle 6.6 kW electric spindle HSK-F63 tool holder Tool changer: Linear tool magazine - 13 tool positions Automatic tool length measurement Vacuum pump Becker 2 x 250 m³/h Control: PC control Busellato/SCM Program nesting module for “Wave” (Maestro) WAVE CAD/CAM software (depending on configuration) Handheld control unit Unloading device with integrated extraction system Machine dimensions L = 5120 x W = 3420 x H = 2120 mm Weight 3400 kg Additional drilling unit (ATEMAG)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Rcodpfxoz Rzyvj Airjh

Condition: used, Year of construction: 1990, Working width 520 mm Length of the planing table 3000 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 3000 x 1000 x 1200 mm Rodpfx Aij Agw Smjrjch weight of the machine ca. 850 kg cutting capacity 20 mm SCM F520 surface planer (jointer) Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Working width: 520 mm Cutterblock with straight knives Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of planer knives: 4 Max. depth of cut: 20 mm Table height: 860 mm Motor power: 4 kW (5.5 hp) Available from stock, loaded onto transport

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Redpfx Aioz Hb Nbjroch

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: KK00054470, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 612 kg, Equipment: CE marking, documentation/manual, SCM Minimax me 35 TR edge banding machine in CE version, manufactured in 2026. Equipped with a glue scraping unit with an automatic on/off system, a scraper with an automatic on/off system, a sawing unit with an automatic on/off system, internal machine lighting, an infrared lamp, and nesting copier kits for the routing unit and the band scraper. Rceds Agniujpfx Aireh

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Rcjdoz Enhzopfx Airoh Bushing diameter: 70 mm Bushing equipped with spacer rings Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 630 mm, grinding width: 630 mm, overall weight: 500 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, type of input current: three-phase, SCM Sandya Win wide belt sander Working width: 630 mm Sanding height: 3 – 160 mm Rcsdpfx Aj Agvzzeirjh 1 combi unit Electric height adjustment Optical oscillation Two feed speed options Main motor power: 5.5 kW