Used Screen Roller for sale (12,357)

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 18,530 kg, operation weight: 18,530 kg, Year of construction: 2026, operating hours: 10 h, JCB VM200D Vibromax/Roller Compactor/18 tons/Warranty until Feb. 2027 • Manufacturer: JCB • Model: VM200D Blsdpfezicfrsx Abtsl • Year of manufacture: 2026 • Operating hours: 10 hrs • Power: 129 kW/175 hp • Air conditioning • Large and small gear groups • Fast and slow gears • Engine: Cummins 4-cylinder diesel engine • Roller diameter: 1.50 m • Roller width: 2.10 m • Transport height: 2.99 m • Transport width: 2.27 m • Tires in like-new condition • Total weight: 18530 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Polar Mohr RA-4 Paper Jogger The machine is in very good condition and ready to work. This is the latest design from a German manufacturer. Technical specifications: Maximum format: B1+ Stack height: 150mm Weight: 550kg Power supply: 400V Air squeezing shaft Air table Right/left shaking option Tilt angle adjustment Jogging frequency adjustment (inverter) Bjdpfxozurzgo Abtjll Adjustable air squeezing shaft force and speed. Chrome-plated table surface

Condition: good (used), functionality: fully functional, power: 62 kW (84.30 HP), fuel type: diesel, empty load weight: 7,100 kg, Year of construction: 2005, operating hours: 2,818 h, Equipment: air conditioning, ROLLER ATLAS AW1070 Year of manufacture: 2005 According to the meter: 2,818 hours 7,100 kg 62 kW Perkins engine - 170 cm roller width - Full cabin with heating and air conditioning - Original paint - Immediately ready for use Selling price: €23,500 net Affordable delivery also possible! Bedpfx Aozvwt Debtell

Year of construction: 2026, condition: new, functionality: fully functional, Vibrating screens are used in crushing and screening plant to separate end products of various sizes. When the material is poured into the screen, the smaller ones pass through the screen surface. Vibrating screens are produced in two, three and four decks and in various sizes. The vibration system can be in the middle or above the screen body. It is obtained by rotating the eccentric weights connected to the shaft, which are mounted on the screen body. Screen body sits on fixed or mobile chassis with heavy type helical springs that absorb vibration. The vibration systems of these vibrating screens are operated by belt-pulley transmission with an electric motor. Horizontal screens, which are capable of better-quality screening, are driven by a double drive center. • Model: FABO HTE-2260 • Type: Horizontal Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 Bodpfx Aozvfwqebtsll • Motor: 2 x 30 kW • Bearings: Heavy duty SKF-FAG • Capacity: 250-370 TPH • Including chassis, motor and safety guards. Depending on its size, it has a screening capacity in the range of 250-370 tons per hour.

Condition: like new (used), trough length 2.7 m Bodpfx Abozxzmtotell trough width 440 mm height 1430 mm safety switch

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, total width: 750 mm, total height: 1,300 mm, total length: 450 mm, working width: 2,400 mm, Device description working width 240mm maximum workpiece height 100mm motor power 0.18 kW year of manufacture 1999 manual adjustment of roller spacing overall width 75 cm overall length 45 cm Bjdpfx Aozxpvijbtoll overall height 130 cm

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Feed capacity: up to 300 t/h Bledeznl Hiepfx Abtsl Transport weight: approx. 23,000 kg including various spare screen decks

Condition: used, Moehringer / Braun Canali roller conveyor Roller cover length 1400 mm Roller spacing 700 mm Bjdpsdffnhofx Abtsll Length approx. 11000 mm

Year of construction: 2006, condition: ready for operation (used), Vehicle Description 4 TEREX TV 1200 rollers 2,920 kg 120 cm roller width Roller 1: Deutz 19.5 kW, approx. year of manufacture 2006, approx. 2000 hours, price: €9,950.00 net Roller 2: Deutz 19.5 kW, approx. year of manufacture 2006, approx. 2000 hours, price: €9,950.00 net Roller 3: Kubota 24.5 kW, year of manufacture 2010, 1,213 hours, price: €11,900.00 net Roller 4: Kubota 24.5 kW, approx. year of manufacture 2007, 1,727 hours, price: €10,900.00 net Affordable delivery options also available! Bsdehz Ebmspfx Abtoll

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm Blsdpfx Aozn Iw Dobtsl -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

Condition: excellent (used), Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted sieve: Separator sieve Bljdpfswx E Tasx Abtsl -Inner diameter: 129 mm -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Blodpfx Absztn Erjtjl Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: new, Year of construction: 2026, material width 100 mm Bodpourni Ujfx Abtell material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 1000 mm² - Mobile use on casters - Operating instructions

Condition: excellent (used), Year of construction: 2011, Mobile Trommel Screening Plant DOPPSTADT SM 518 Profi Bedpfx Aozwpcyobtoll Screening drum length: 4.70 m Screening drum diameter: 1.80 m Screening drum aperture: as per agreement Folding side discharge conveyor, length = 5 m Folding rear discharge conveyor, length = 5 m

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Raised Fully Cleaned Bledpfx Aboy Twkmjtjl

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Blodew Eb Uaspfx Abtol Automatic Stacker: SPS AUTOSTACK 2

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 2004 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 250 mm supply- and removal roller table with lateral guidance FURTHER LENGTHS: 1meter € 1.149,- 2 meter € 1.418,- 4 meter € 2.405,- 5meter € 3.001,- 6 meter € 3.668,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. Bedpfx Aewiq Spebtoll (sample photo)

Condition: used, machine/vehicle number: 006327, Max. panel width: 1300 mm Max. panel length: 2800 mm Blodpfx Abey Nkxcjtol

Year of construction: 2001, condition: used, - Manufacturer: Venjakob - With dust cover including folding doors - Connections for ventilation and air release - Fully covered under the rollers - Year of manufacture 2001 Bodpozf N Rmofx Abtoll - Working width 1,300mm - Working height: 900 +- 20mm - Roller diameter: 80mm - Roller pitch: 140mm - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet

Condition: used, Year of construction: 1997, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm Bljdpszf N E Rsfx Abtol - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, Year of construction: 2001, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet Bljdpfjykuzvex Abtjl - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Year of construction: 2014, condition: used, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 65 mm Bjdpfxsyatdze Abtell - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: used, Year of construction: 2001, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases Bedoyifwispfx Abtsll - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2003, - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A Bjdpfxszmh Ers Abtell - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Roller Conveyor – Precise and Lightweight Multi-Directional Material Handling The ball roller conveyor is a specialized material handling solution designed for easy and precise maneuvering of workpieces in multiple directions. Thanks to its ball transfer units, it enables accurate positioning of workpieces of various sizes, significantly improving ergonomics and workflow efficiency at workstations such as band saws, cutting machines, CNC machining centers, and packaging machines. It is a practical, lightweight, and functional solution for supporting internal material handling processes. Key Advantages Multi-directional movement – ball transfer units allow workpieces to be freely moved in all directions. Compact design – its low weight and compact dimensions make it easy to position in confined workspaces. Height adjustment from 680–1100 mm – allows the conveyor to be adapted to different machines and workstations. Stable steel base – provides rigidity and safe operation. Easy operation – quick setup and intuitive height adjustment. Construction and Technology The conveyor is built on a rigid steel frame with a single transport module equipped with a ball transfer system. Each ball is mounted in a bearing housing, ensuring durability and virtually friction-free movement of workpieces in all directions. The design allows precise adjustment of the working height within a range of 680–1100 mm. With a working width of 400 mm, the conveyor can be used independently or as part of an integrated roller conveyor system. Precision and Productivity Unlike conventional conveyors equipped with straight rollers, the ball roller conveyor enables not only linear movement but also lateral and rotational movement of materials. This solution significantly simplifies workpiece positioning during cutting, marking, packaging, and machining operations. The operator can quickly and accurately position the workpiece, minimizing the risk of errors and damage. With a low weight of just 10 kg, the unit can be easily moved between workstations. Applications Ball transfer conveyors are widely used in industrial environments where the following are required: precise handling of large or heavy workpieces, intermediate material transport between workstations, material support during packaging, cutting, or machining operations, optimization of logistics processes in warehouses and production facilities. This type of conveyor works perfectly with conveyor lines, CNC machines, and assembly workstations. Standard Equipment Ball transfer module with a working width of 400 mm, powder-coated steel construction, height adjustment from 680–1100 mm with locking mechanism, stable base with non-slip feet. Optional Equipment Transport wheels with brakes, ball transfer modules in other widths, connection systems for additional conveyors, rubber-coated ball surfaces for handling delicate materials. Bodpezwdr Nsfx Abtell Technical Specifications Technical specification Value Working width 400 mm Height adjustment 680–1100 mm Transport dimensions (packaging) 480 × 445 × 150 mm Weight 10 kg