Tapered rollers 550mm for log transport

500

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 538 mm, turning diameter: 350 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 535 mm, controller model: Mazatrol PC Fusion 640T, Mazak Super Quick Turn with IEMCA TAL/AUTO 65/32 bar feeder! The machine operated in single-shift mode at 80% utilization! Kjdpjytcmxofx Abcolp TECHNICAL DETAILS Turning length: 538 mm Maximum turning diameter: 350 mm Maximum turning diameter from feeder: 70 mm Maximum swing diameter: 525 mm X-axis: 190 mm Z-axis: 535 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 positions Bar feeder Maximum bar length: 3,200 mm Minimum bar length: 400 mm Maximum bar diameter: 32 mm Minimum bar diameter: 5 mm Bar feeder weight: 850 kg MACHINE DETAILS Control: Mazatrol PC Fusion 640T Voltage: 400/230 V 50 Hz Control voltage: 230 V / 24 V Dimensions & weight Dimensions (L x W x H): approx. 4,000 / 5,700 x 1,800 x 2,000 mm Total weight: approx. 5,000 kg EQUIPMENT Chip conveyor KSF 60/S4 bar chuck IEMCA TAL/AUTO 65/32 bar feeder Note: The machine is sold without tool holders.

Year of construction: 1993, condition: good (used), Clamping carriage Braun WES fully hydraulic with auxiliary carriage Ksdpfx Abofuh Dyjcjlp with tracks Track width: 79 cm good condition - immediately available Visit also my other advertisements. I am looking forward to your inquiry.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 298 h, machine/vehicle number: 0200245367, load capacity: 450 kg, lifting height: 12,000 mm, platform length: 2,920 mm, platform width: 1,600 mm, construction height: 1,980 mm, 1200 cm Rough Terrain Scissor Lift Offroad Work Platform with Only 298 Operating Hours No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 450 kg Lifting height: 12,000 mm Platform dimensions: 2,920 x 1,600 mm Platform extension length: 910 mm Working height with guardrail unfolded: 2,790 mm Ground clearance: 200 mm Gradeability: 35% Drive speed: 4.80 km/h MACHINE DETAILS Operating hours: 298 h Drive type: Electric Battery: 8x 6V, 370Ah, measured at 25.2V (very good performance!) Dimensions & Weight Transport dimensions (L x W x H): 2,920 x 1,750 x 1,980 mm Kljdpfx Aboyuwq Uocop Weight: 4,500 kg FEATURES Non-marking tires Integrated battery charger All dimensions are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible using a large forklift on site, at your own risk. Collection ONLY upon receipt of payment confirmation by email! Collection WITHOUT prior appointment Monday to Friday, 7:00 am – 4:30 pm. A mast that is too high for transport can be dismantled upon request. In case of late collection, a storage fee of €20 per machine per day will be charged (arrears must be paid prior to collection).

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Kljdpfjyuymfsx Abcep Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Ksdpovuhumjfx Abcslp Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Kljdexzuyljpfx Abcop - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale Kedjxyafwspfx Abcjlp

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. Kledpfx Abehpbxiecjp ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm Ksdpfx Asxq R E Nsbcelp z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as Klodpfx Ajxtfz Dsbcop well as prior sale!

Condition: used, Year of construction: 2018, operating hours: 3,977 h, functionality: fully functional, Morbark Woodhog 3400XT 3,977 hours In good condition with transport dolly Kljdjwlzdzjpfx Abcjp Location: Belgium

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety Ksdpfx Ajywcl Rsbcslp and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: good (used), Year of construction: 2012, turning diameter: 120 mm, Machine type: NZX-S1500/500 Manufacturer: MORI SEIKI Year of manufacture: 2012 Control: F31iA Ksdsywcbxspfx Abcjlp Short description: Turning center with 2 turret heads for shaft machining

Condition: used, Chipper Bruks 602CS IDC000117 - drum chipper - manufacturer: Bruks - model: 602 CS - drum diameter: 600 mm - infeed opening: 540 mm X 300 mm - number of knives: 2 Ksdpfx Asvldmasbcelp - maximum solid wood thickness: 180/100 - weight: 1400 kg - standart chip length: 20-35 mm - capacity: 10-20 m3/h - electric motor: 26 kW - electric motor for fan: 11 kW

Condition: good (used), mileage: 5,94,709 km, power: 375 kW (509.86 HP), first registration: 04/2019, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,040 mm, total width: 2,550 mm, total height: 3,790 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Bluetooth - Digital tachograph - Tachograph (control unit) - Fixed - Globetrotter - Halogen lamp - Manual - PTO (power take-off) - Pump Ksdpfoyiy Edox Abcolp - Radio/cassette - Lane departure warning system - Fabric - Additional braking system Number of axles: 3, configuration: 6x2, unladen weight: 11,580 kg, gross weight: 30,000 kg, total tank capacity: 405 liters, trailer coupling, kingpin diameter: 40 DIN, fifth wheel: fixed, number of diff locks: 1, cab type: Globetrotter, cruise control, tachograph (control unit), digital tachograph, air conditioning, number of airbags: 1, stationary air conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, GPS navigation, color: white, heated mirrors, lighting type: halogen lamp, lane departure warning system, climate control, seat heating, Bluetooth, engine output: 375 kW (503 Hp), fuel: diesel, Euro 6, transmission type: I-Shift, transmission manufacturer: Volvo, gears: 12, additional brake system, retarder manufacturer: Voith, power steering, ABS, ASR, PTO (power take-off), number of PTO shafts: 1, starter battery, overall length: 570 cm, pump, hook-lift device height: 148, central locking, seat arrangement: 1+1, seat upholstery: fabric, seat adjustment: manual, MULTILIFT 20S59 / 6X2 LAST AXLE STEERING / REAR STEERING AXLE / ASSE STERZANTE/ RET. Transmission Transmission: VOL, 12 gears, automatic Axle configuration Brakes: disc brakes Axle 1: Tire size: 385/55R22.5; steered; left tire tread: 7 mm; right tire tread: 10 mm; suspension: leaf spring Axle 2: Tire size: 315/70R22.5; twin tires; left inner tread: 7 mm; left outer tread: 6 mm; right inner tread: 5 mm; right outer tread: 5 mm; suspension: air suspension Axle 3: Tire size: 385/55R22.5; lift axle; steered; left tire tread: 4 mm; right tire tread: 12 mm; suspension: air suspension Weights Unladen weight: 11,580 kg Payload: 18,420 kg gross vehicle weight: 30,000 kg Functionality Loading platform height: 120 cm Pump: Yes Maintenance APK (Periodic Technical Inspection): inspected until 11.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Financial Information Leasing price: €1,010 per month (default, 60 months); Please ask for more information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? It’s easy! • Large, rapidly changing stock • Recognizable quality • A good price • Reliable business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more.... Please visit our website for special offers and complete inventory: Leasing via Kleyn Trucks is possible in most European countries...