Used Sheet-Bending Machines for sale (67,227)

Condition: good (used), sheet width: 1070 mm plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm Bedog Rypmjpfx Andjdi weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m - upper roll can be swing out - operation via hand wheel

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-70 WORKING LENGTH 700 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE Bsdpfx Ajhy Ekiondedi MAXIMUM THICKNESS OF BENDED STEEL SHEET -1.0 MM DEVICE WEIGHT 70 KG.

Condition: new, Year of construction: 2025, Delivery every week - RELIABLE! Are you looking for a folding machine? You expect quality, reliability. You can rely on competent advice and accurate, punctual delivery by the well-established Prod-Masz team. Direct from the manufacturer! Folding machine 2140T/0.8 incl. transport wheels Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - degree scale - Weight: about 150 kg - The rotary shears (max. cutting capacity 0.8 mm / steel) + 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. - transport wheels incl. Price: €1,350.00 Short delivery times! Ordered today - delivered next week! Bdsdpfx Aeb Hd Dljndei We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Model: PBH-63T/3200 Bdodpfx Anjz Aiqzjdji Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, ZGH-type machines are a versatile solution for sheet metal processing. They are universally applicable for demanding workshop applications. To create this versatile solution for all applications up to 1.2 mm steel sheet, PPHU Prod Masz drew on its many years of experience in mechanical engineering. The ZGH machines offer the optimum in precision, durability, and stability. This model is equipped with a control panel. Bedpfsc I Tn Hex Andedi Maximum working length: 3140 mm Maximum sheet thickness: 1.2 mm (steel) Weight of the manual machine: approximately 2100 kilograms Upper beam lifting in three stages Bending die: 30 mm Maximum clear distance between the beams: 100 mm Bending angle: 150 degrees Delivery to Germany: 750 euros Delivery time: up to 2 weeks Optional: roller shear at an additional cost Optional: rear stops with scale at an additional cost We look forward to hearing from you!

Condition: used, Year of construction: 2008, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending radius (max.): 45 mm, overall weight: 180 kg, total length: 3,300 mm, total height: 1,150 mm, operating pressure: 125 bar, Equipment: documentation/manual, emergency stop, foot remote control, quick-change device, We are offering this used TRACTO-TECHNIK TB20D mandrel bending machine for sale. Serial number: TB20D 2110608 Year of manufacture: 2008 For sale is a mandrel bending machine, type: Tracto-Technik Tubobend TB20D, 3000 mm, from its first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. It is fully operational and can be demonstrated under power upon prior arrangement. The TUBOBEND 20 mandrel bender is a pipe bending machine with a free bending head for processing pipes in all planes. It is designed for work involving adjustments according to drawings or samples, as well as for series production. With the TUBOBEND 20 mandrel bender, precision steel pipes according to DIN 2391/C, material St 35.4 NBK (hydraulic pipes), 6-16 mm diameter can be processed. The processing of other pipe qualities and dimensions is also possible. The mandrel system allows for the smallest technically feasible radii to be achieved. If required, a folding smoother can also be used. The bending unit is designed in such a way that even serpentine (meander) bends can be made. Dimensions: L x W x H in mm 920 x 720 x 1800 (without stop device) Machine lower part 630 x 550 x 700 Machine upper part 920 x 720 x 500 Weights: Total weight approx. 180 kg (without stop device) Machine lower part with hydraulic unit approx. 74 kg Safety device: - Emergency stop button: A central emergency stop button for the TUBOBEND 20 is located on the control panel. Safety cover with electrical shut-off in the hazard area of the bending arm. Description and overview: Bodo Abbmpspfx Andodi The TUBOBEND 20 mandrel bender is a small, mobile, compact pipe bending machine that can be easily disassembled into two main components for transport purposes. The bending head can be swivelled from the vertical to the horizontal position. The pipe feed length is 1500 or 3000 mm. Extensive scope of supply (a very large number of tools included!): An advantage of this offer is the extensive tool package, which is completely included in the price: see separate list. Documentation: Original operating manual is complete. EC Declaration of Conformity available. Note: The machine will only be sold as a complete package together with the complete set of tools according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a shipping company commissioned by him. Technical data according to available documents. Subject to prior sale.

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-70 WORKING LENGTH 700 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -1.0 MM DEVICE WEIGHT 70 KG. Bdjdpfx Anohy Ekfsdei

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Bedpfx Aottc Uajndodi

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Bjdpfx Aeqy E R Tondedi Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: new, Year of construction: 2025, Sheet metal folder 3140/0.8 PROD-MASZ company is one of the biggest manufacturer of Metal Plate Folding Machines in Europe. Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Technical details: max. working length: 3140 mm Bsdjcxu Ugepfx Andjdi bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 145 degrees thickness of bending bar: 24 mm passage: 80 mm rotary shears +350 Euro Protractor Servomotors Angle stop for constant bending angle Weight: 400 kg Warrenty 12 months Certificate CE Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000,8 Bsdpocl Ixqsfx Andodi Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 400 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Bdedez Ahanopfx Andji Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop Bodpfez S Afpox Andjdi -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, The Prod-Masz company has had a good reputation for decades. We voluntarily face the strict and certified quality controls and offer you maximum quality, reliability and satisfaction! Of course we are happy to answer your questions personally and thank you for your interest in our company. Semi-automatic folding bench ZGH-3140 / 1.2mm: -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production the maximum working length 3140 mm the max. Sheet thickness for 1.2 mm (steel) the weight about 1400 kilograms of the hand machine lifting the top beam in three positions Bending beam: 30mm The max. clear width between the bars 100 mm Bending angle: 155 degrees Delivery date: every week L: 3.5m, W: 1.2m, H: 1.5m -ᐳ Adjustable support bars with scale optionally plus 1250 euros We are looking forward to your contact! Bdodec Nxvkspfx Andsi We issue the invoices with 0% (intra-community delivery).

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Bodpfxjxc N Rhe Andsdi Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 Bjdsyh D Nnepfx Andjdi distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m For cone bending, approximately 70% of the maximum plate thickness applicable to standard round rolling can be processed. For truncated cone rolling, a maximum plate thickness of approx. 8 mm can be processed. *

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact! Bdodpfx Ajc Nxwhendji

Condition: new, Year of construction: 2025, Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides. Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam. The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work. We get this possibility thanks to the construction with special cutouts. This machine performs bending operations from the top up and down. The strengths of this bending machine include high performance while maintaining the precision and repeatability of the machining. Intended for processing steel, aluminum and other sheet metal. This folding bench is extremely functional. RED 2700 / 1.0mm Technical specifications: - maximum working width: 2580 mm Bdjdpfx Aneb H Ac Iodei - Bending performance: up to 1.0 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 490 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We issue the invoices with 0% (intra-community delivery) We are looking forward to your contact!

Condition: new, Year of construction: 2026, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Bdodpfxocgmd Uo Andei Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: used, functionality: fully functional, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 42 mm, pipe length (max.): 2,000 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 220 bar, Equipment: documentation/manual, emergency stop, Sommer pipe bending machine for sale We are selling a Sommer pipe bending machine. The machine is fully functional and can be tested on-site with power, subject to prior arrangement. Bdedo Aazvnepfx Andsi The original hydraulic unit has been replaced with an external hydraulic unit. If you are interested or have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Hand-operated folding machine in a stable design. The machine has a stop for the same bending angle 0-155 degrees and rear stops for holding the sheet. These folding machines are characterized by a high bending performance with great weight. Excellent workmanship and practical detailed solutions convince with this bending machine, the bending capacity with 1.2 mm sheet steel is sufficiently dimensioned for most applications. Edge bench 3.14m / 1.2mm Bending length: 3140mm to sheet steel 1.2mm Bending angle: 155 degrees Folding beam: 30mm Weight: 840 kg Roll cutter 0.8mm plus 350 euros Bdjdpecb H Eisfx Andei We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Bodpfx Anjyviwqjdjdi Item numbers: 251007 and 251008

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM Bsdpfshy El Ssx Andjdi ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,7 MM DEVICE WEIGHT 125 KG.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Bdsdpfez R Rpbox Andsi Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm Bdodpscka N Ujfx Andoi to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.