Used Sheet Metal Bending Machine for sale (66,665)

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 Pgjdpjya Iaqsfx Aa Djg - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Pgjdpfjhmmfkjx Aa Dsg Good condition

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 Pgjdpfx Aaofnabye Dsg No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000,8 incl. rotary slitters Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees Pedpjctui Rofx Aa Djgg cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.400,00 Euro ( VAT excl. ) We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: new, Year of construction: 2025, The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines. A professionally executed folding machine is the basis for years of use of the machine. That is why it is important to have a trustworthy company by your side. Folding machine 1400/2.0mm the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms The maximum clear width between the beams is 80 mm Accessories: degree scale, front depth stops, rear frame for holding the sheet metal, angle stop Delivery price: PLEASE ASK Pgodpfeb H Afdex Aa Djg Price: 1300 euros Cash on delivery / bank transfer The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros welt press optional 75 euros The machine complies with CE guidelines and has a 12-month guarantee. We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 Pgjdpjcntk Rsfx Aa Dsg Our products are of the best quality and have Certificate CE. Plate Bending Machine ZGR-2000\0,8 Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Price: 1.050,00 Euro ( VAT excl. )

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Folding bench ZGR-2640/0.8 Guarantee 12 MONTHS. Certificate CE 2640mm working length STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Pedpfxjb Ngb Ns Aa Dogg Manual folding machine plus 75 euros the weight 290 kg Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, The folding bench ZGR-2000 / 0.8 is equipped with all accessories and offers a really unique price-performance ratio. front and rear stop, degree scale and bending angle width limiter are part of the standard scope of delivery of this lightweight folding bench. Sufficiently sufficient for processing copper, zinc and aluminum in the usual thicknesses and perfect for everyday use on the construction site or workshop. Folding bench 2140 / 0.8 the maximum working length is 2140 mm the max. Thickness of the steel sheet for 0.8 mm Bending beam 15 mm Roller shear + 350 Euro Pgsdpfx Aajcgbnwe Dog Hand folding machine + 75 Euro the weight about 180 kilograms of the hand machine cut with scissors along the entire working length lifting the upper beam in three positions The max. clear width between the beams 80 mm Bending angle 145 degrees We are looking forward to your contact!

Condition: new, Year of construction: 2025, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Pgjdpfx Ajcgmd Uea Deg Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000,8 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 0,8 mm (Steel) - Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor Psdpoc N Aipefx Aa Dogg - Weight: 400 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Price: 2050 Euro Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Pedpocxu Uxjfx Aa Djgg Folding bench ZGR-2000T/0.8 incl. transport rollers Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm plus 350 euros Manual folding machine 75 euros Price: 1350 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Technical data: Psdpfoc Rtv Tex Aa Degg Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, “Prod-Masz” your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their special flexibility, performance and versatility. Pgodpfxecgmgij Aa Dsg Anyone who knows us knows that we are a reliable company :) BENDING MACHINE 2.14 m /1.2 mm Technical specifications: - maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - lifting of the upper beam in three positions - Gas springs - Passage opening: 80 mm - degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: approx. 290 kg - The machine complies with CE guidelines and has a 12-month guarantee. Roller scissors 0.8mm plus 350 euros Price: €1,550 Delivery- every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, DON'T WAIT ANY MORE AND ORDER YOUR MACHINE We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during the guarantee period and afterwards. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Bending machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops Pgsdpfx Aecka Suoa Dog - Weight: about 400 kg - The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: €330.00 Cash on delivery Delivery within 4 days from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Folding bench ZGR 2640/0.8 Guarantee 12 MONTHS. Certificate CE 2640mm working length Psdpfx Aaschuylo Degg STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Manual folding machine plus 75 euros the weight 290 kg Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Pedpfxscntlls Aa Degg Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs.

Condition: new, Year of construction: 2025, Bending machines from "Prod-Masz" - CE tested quality! ZGR-2140L/0.8 Bending angle: 160 degrees Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 160 degrees Psdpfxjb Hxzyj Aa Djgg - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - Angle indicator - Weight: about 180 kg - The machine complies with CE guidelines and has a 12-month guarantee. - Roller scissors – max. cutting capacity 0.8 mm (sheet steel) plus 350 euros Price: €1,500.00 Delivery costs: please ask Delivery: every week Invoices are issued either with 0% of VAT as an intra-community delivery or with 23% of VAT. We are looking forward to your contact!

Condition: new, Year of construction: 2025, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Pgedpjb Na Eqofx Aa Deg Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: new, Year of construction: 2025, We are a production company that is constantly developing dynamically thanks to the professionalism and commitment of our employees. Thanks to the experience we have gained, we are able to offer the best and highest quality solutions in the field of production. The folding bench ZGR - 4140 mm 0.8 mm incl. Roller shears and hand folding machine - Working length: 4140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 150 degrees - Folding beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Lifting the top beam in three positions Furnishing: - Roller shear 0.8 + 350 Euro - Degree scale Pjdpfx Aajch Tkvj Dogg - Angle stop - rear frame to hold the sheet - hand folding machine Price: 6 550 euros Please contact us if you are interested.

Condition: new, Year of construction: 2025, Our priority is buyer satisfaction. Sheet metal bending machines from PROD-MASZ are designed according to individual customer requirements. Thanks to many years of experience in the industry, we can effectively implement the expectations of the roofers, to whom we primarily address our offer. Semi-automatic folding bench ZGH-2140 / 3.0mm -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production the maximum working length: 2140 mm Bending power: 3.0 mm (steel) Bending beam thickness: 30 mm Bending angle: max. 140 degrees Upper cheek opening: 80-95 mm Weight: approx. 1300 kg Power: 3 KW- 400 volts CE marking with a control panel Warranty: 12 months Delivery date: up to 3 weeks from the order date Pjdpecxu Tzjfx Aa Degg -ᐳ Adjustable support bars with scale optionally plus 1250 euros We are looking forward to your contact!

Condition: new, Year of construction: 2025, Prod-Masz - your competent partner for metal, sheet metal and steel processing. We are constantly expanding our offer to meet the demands of the market. Thanks to many years of experience, highly qualified staff, high quality, aesthetics and reasonable prices, we gained the stable position in the market and the trust of customers. Absolute novelty from Prod-Masz! Bending beam only 15mm for sheet steel 1.2mm to 2m. RED 2060 / 1.2mm incl. 2 levers for opening the bending beam Technical specifications: - maximum working width: 2060 mm - Bending performance: up to 1.2 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 420 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro Podpfx Aaecch Eqj Degg The machine complies with the CE guidelines and has a 12-month guarantee. Delivery date: 2-4 days We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Prod-Masz press brakes - your best choice! High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench ZGR-2140L/0.8 the maximum working length 2140 mm the max. thickness of the steel sheet for 0.8 mm roller scissors incl. bending beam 15 mm Podpfxsb Hd His Aa Dsgg Bending angle 160 degrees the weight of the handheld machine is about 165 kilograms the cut with the scissors on the whole working length lifting the top beam in three layers The maximum clear width between the beams is 80 mm Rotary shears + 350 euros Crushfolder + 75 euros Shipping costs please ask Delivery possible every week We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640.-0.8 is a sensational machine for precision bending of all types of metal sheets (steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Pgjdpfx Aoc Nwd Aea Dsg Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard.

Condition: new, Year of construction: 2025, Our qualified and motivated team, based in Poland, manufactures machines for sheet metal processing. Our philosophy is to give our customers the best. Pgodpec I T Rxofx Aa Deg A binding, open dialogue that creates trust and security is particularly important to us. ZGR-2140L/0.8 Bending angle: 160 degrees Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - Angle indicator - Weight: about 180 kg - The machine complies with CE guidelines and has a 12-month guarantee. - Roller scissors – max. cutting capacity 0.8 mm (sheet steel) plus 350 euros Price: €1,500.00 Cash on delivery! Delivery: every week We are looking forward to your contact!

Condition: new, Year of construction: 2025, ZGH type machines are a versatile solution for sheet metal processing. They can be used universally for demanding craft operations. To create this versatile solution for all applications up to 1.2 mm sheet steel, PPHU Prod Masz drew on its years of experience in mechanical engineering. The ZGH offers the optimum in precision, durability and stability. This model is equipped with a control panel. the maximum working length 3140 mm the max. thickness of the sheet for 1.2 mm (steel) the weight of the hand machine is around 2100 kilograms the lifting of the upper beam in three layers bending beam: 30 mm the max. clear width between the beams 100 mm bending angle: 150 degrees delivery to Germany 750 euros delivery date: up to 2 weeks roller shears optional for an additional charge rear stops with scale optional for an additional charge Pgodpfx Aaoc I Tn Hs Dsg we look forward to hearing from you!