Used Sign Boards for sale (8,341)

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Rcsdow U T Ucopfx Anyef

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Redpfezua N Sjx Anyjcf Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Year of construction: 1998, condition: ready for operation (used), A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible. Rcedpszpyw Eefx Anysf

Condition: good (used), Hazard lights, night markings, flashing lights, day/night markings -Signal lights for: Wind turbines -GF light: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Quantity: 2 pieces Rjdpfxsfkph Uo Anyjcf -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area Rcsdpfx Aszn Ipysnyef • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Condition: good (used), Year of construction: 1997, operating hours: 30,475 h, functionality: fully functional, machine/vehicle number: 8277, total height: 3,355 mm, total length: 6,200 mm, total width: 3,920 mm, input voltage: 400 V, type of input current: three-phase, UNISIGN CNC bed milling machine UNIVERS 5, year of manufacture 1997 Rsdpjylbf Rjfx Anyocf Control system: Siemens 810 MGA 3 X-axis travel: 4000 mm Y-axis travel: 750 mm Z-axis travel: 400 mm Feed rate: 5 - 28,000 mm/min Rapid traverse rate X-axis: 28,000 mm/min Rapid traverse rate Y-axis: 28,000 mm/min Rapid traverse rate Z-axis: 28,000 mm/min 51 tool changer positions SK 40 DIN 69871 A / ISO 7388-1 T-slots 1 x 18H9 / 4 x 18H12 T-slot spacing: 130 mm Maximum table load: 1,000 kg 400V / 3 phases / 50Hz / 60A Power consumption: 40 kW Air pressure: 6 bar - 20 ltr/min Number of leveling elements: 8 pieces Operating hours: 30,475 hours Dimensions: 6200 x 3920 x 3355 mm Weight: 12,000 kg

Condition: excellent (used), machine/vehicle number: 71080, Available: immediately Rjdpfxsh Ek U Do Anyjcf

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Rjdpezma E Djfx Anyscf Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Condition: excellent (used), Year of construction: 1980, - saw - moulder - thicknesser planing width 210mm planing height 120mm Rjdpfxsp Sugfj Anyocf tool change is done by changing the position of the belt.

Condition: used, SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; Rsdswxxz Rspfx Anyecf - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. SIGNODE automatic Strapping: Machine Model M400/PA/TSM for vertical strapping Pneumatic strapping floating head: for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness 450 kg. jumbo coil dispenser: with electrical unwinding Switchboard: Included

Condition: used, Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 810 D, total length: 6,500 mm, total width: 3,500 mm, overall weight: 9,000 kg, spindle speed (max.): 9,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis vertical machining center from Unisign, model Univers 4, year of manufacture 2004. The machine is used but in good condition, fully functional, and has been regularly maintained. Special feature: second milling spindle (replacement spindle included). Operating hours: 19,357 Technical Data -Traverse paths: X = 1600 mm / Y = 400 mm / Z = 400 mm -B axis: A axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load capacity: approx. 150 kg -Working feed rate: 5 – 28,000 mm/min -Rapid traverse (X/Y/Z): 28,000 mm/min Rodpfxox Ipute Anyjcf Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 stations -Tool diameter: approx. 70 mm (up to 200 mm with free adjacent slots) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazine: approx. 200 kg -Tool change time: approx. 8 sec Machine Requirements & Dimensions -Total power requirement: 14 kW -Machine weight: approx. 9000 kg -Footprint (LxW): approx. 6.5 x 3.5 m Equipment & Accessories -Coolant system (approx. 480 L, internal & external emulsion) -Clefil RBF-E100 20 bar pump unit -Chip conveyor -Rinse gun in machining area -Hydraulic/pneumatic clamping options in machining area -Enclosed work area cover in accordance with safety regulations (UVV) -Röhmheld hydraulic aggregate (max. 500 bar) -Automatic probe RWP20.00 -Various SK40 holders -Technical documentation & floor plan available Maintenance -Regular maintenance performed -Hydraulic and pneumatic hoses partially renewed -LT module replaced in control cabinet The machine is immediately available and ready for operation. If interested or if you have any questions, please get in touch! All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: used, Year of construction: 2021, UV curing oven in operational condition. Possibility for 2 units. Ask for a quotation! Rjdpfsy Nzb Uox Anyocf

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Rodpfoy A Ifmex Anyscf Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. Rcsdpfxsx R R Igs Anyof The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. The extruded material is formed into a parison, which is then molded into the final product.

Year of construction: 1978, condition: used, 1,2 t, Coil OD 1.650 mm Rodpetn Dijfx Anyocf 20 - 300 x 0,4 - 3,5 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 5,100 h, functionality: fully functional, type of input current: three-phase, Signode (Haloila) Octopus Compact – Automatic Pallet Stretch Wrapper (2014) Manufacturer: Oy M. Haloila Ab, Finland (brand now part of Signode) Model: Octopus Compact Year of manufacture: 2014 Type: Automatic pallet wrapping machine (rotary ring – load remains stationary) Rcedpfoyhw Hpjx Anysf Compliance: CE marked Description For sale: Signode / Haloila Octopus Compact automatic pallet stretch wrapper. This is a rotary ring system where the pallet stays stationary while the wrapping ring rotates around the load. This design is particularly suited for light and unstable loads, as the pallet does not rotate during the wrapping process. Electrical specifications (from rating plate): 3~ 400 V, 50 Hz Power: 7 kW Current protection: 3 × 14 A Delivery / Incoterms EXW / FCA / DAP terms available. Loading and transport can be arranged upon request. Further information on request Photos and videos of the machine in operation, transport dimensions/weight, and the precise equipment configuration (conveyors, safety fencing, automation interface, options) are available. Contact: Please send a message for full details and a quotation.

Condition: used, Year of construction: 2001, two head two lance Rsdpfx Anoxtdu Asyjcf CE RULES width 2600mm H 4000

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 1998, Line marking machine: + ProSign + Citadine + Self-propelled – hydraulic – forward and reverse + Airless pump + Line spray gun + Hand spray gun + Honda GX160 engine, 5.5 HP + Year of manufacture: 1998 Rjdpfx Ansx Ek Tfoyocf Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,982 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-Curable Inks. High-performance production machine for printing on a variety of materials with UV-curable inks. Ideal for printing on sheet and board materials such as aluminum composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, and cut-to-size films. Even challenging materials, such as those sensitive to heat, can be printed without issue due to the stepless adjustability of the UV lamps, preventing excessive heating. The integrated, retractable positioning marks allow for precise and easy placement of print media, enabling accurate series production. The printer features precise print control, ensuring very high accuracy for multiple print passes (e.g. 2.5D, relief, or Braille printing). Technical Data: - 3 Ricoh GEN-5 print heads - Print resolution up to 1200x1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Steplessly adjustable lamp intensity - Print area approx. 2500 x 1200 mm - Maximum material thickness: 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum system with 4 controllable vacuum zones - Ink system with 1-liter bottles - No chip required for recognition (open system) - Connection: 32A – 380 Volt Rcedpfx Aeyc Nt Denysf - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The unit is operational and can be viewed at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be provided upon request for an additional charge (not included in the price). Year of manufacture 2019 – Completely overhauled in 2025* *All ink-carrying parts such as ink hoses, filters, pumps, etc. replaced. Print heads are used but in perfect working condition (see nozzle check printout). All relevant drive components checked and adjusted. Price: €21,900 without RIP software €23,900 with current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,590 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-curable inks. High-performance production machine for printing on a wide range of materials using UV-curable inks. Ideal for printing on boards and sheet materials such as aluminium composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, as well as cut-to-size films. Even challenging substrates, such as heat-sensitive materials, can be printed with ease thanks to the stepless adjustment of the UV lamps, preventing excessive heat build-up. Integrated, retractable registration pins enable precise and effortless positioning of print media, making accurate series production possible. The printer features highly accurate print control, ensuring excellent repeatability when printing multiple passes (e.g., for 2.5D, relief effects or Braille lettering). Technical data: - 3 Ricoh GEN-5 printheads - Print resolution up to 1200 x 1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Lamp intensity continuously adjustable - Print area approx. 2500 x 1200 mm - Maximum material thickness 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum table with 4 independently adjustable vacuum zones - Ink system with 1-litre bottles - No chip recognition required (open system) Rcsdpoyc Nt Rjfx Anysf - Power connection: 32A – 380 volts - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The machine is operational and can be inspected at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be offered for an additional charge (not included in the price). Year of manufacture: 2018 – Refurbished 2025* *All ink-carrying components such as ink tubes, filters, pumps, etc. have been replaced. Printheads are used but in flawless condition (see nozzle test printout). All relevant drive components checked and calibrated. €18,900 excluding RIP software €20,900 including current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T Rodpoymahyjfx Anyocf The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Number of axis: 3 Reach: 1300 mm Payload: 4 kg Rcodpfx Anjx Urvtjyef X = 300mm Y= 1000mm Z=1300mm

Year of construction: 2014, condition: good (used), We are selling our Asys Insignum 1000 Scan. Redezxgx Iepfx Anyjcf Asys Insignum 1000 Scan Serial No. 052939 Year of manufacture: 2014 Shipping is possible.

Year of construction: 2014, condition: excellent (used), For sale: our Asys Insignum 1000 Scan Asys Insignum 1000 Scan Serial number: 052441 Year of manufacture: 2014 In very good condition. Shipping possible. Rcjdpfjzxgu Aox Anysf

Condition: ready for operation (used), Siemens signal processing HCP Board IMCAD L93742 9/99 board SN 42369-92, used, minor signs of wear, 100% functional, scope of delivery as per photos Rcsdpezu Eu Tofx Anyjf