Used Advertising Material for sale (18,490)

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 1.300.030.578, functionality: fully functional, overall weight: 5,000 kg, number of spindles: 8, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 8 pcs. MACHINE DETAILS Voltage: 400 V Power consumption: 35 A Fuse rating: 50 A Empty weight: 5,000 kg Number of transport packages: 3 pcs. EQUIPMENT Documentation available Kedpfx Aoz Nivvjniodu Drilling tool available Tools included CE marking Type of milling table: beam table Material clamping system: pneumatic

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Radius: 2 mm Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg Kdjdpfx Asz Iru Doniju EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Kodjz Im Rajpfx Aniodu Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Condition: ready for operation (used), functionality: fully functional, operating hours: 17,508 h, Year of construction: 2018, machine/vehicle number: S0721Q0022, laser power: 500 W, overall weight: 4,300 kg, construction height: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Build volume: Ø 300 × H 400 mm Build rate: 5–60 cm³/h Layer thickness: 20–150 µm Laser power: 500 W Beam diameter: 100–500 µm O₂ concentration: 100 ppm Exposure speed in the powder bed: 3 m/s Preheating of the substrate plate: 200 °C MACHINE DETAILS Voltage: 400 V Current: 32 A Frequency: 50/60 Hz Dimensions & Weight Kedpfsz Irhkox Aniodu Dimensions incl. filter system: 3,385 × 1,435 × 2,225 mm Weight incl. filter system: 4,300 kg Laser operating hours “Laser Beam on”: 17,508 h (as of 11.04.2023) EQUIPMENT Filter system Zirox sensor Single laser Powder Bed Monitoring Condition Monitoring Performance Monitoring Protective gas operation with nitrogen or argon 4 dosing containers 1 build cylinder 1 overflow container Various spare parts, including protective glass Manuals All axes professionally secured for transport The following materials can be processed: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminum-, nickel-based, cobalt-chromium, copper, titanium and precious metal alloys. Last processed material: AlSi10Mg

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. Kodpfx Ansz Tdc Ssiedu The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: new, Year of construction: 2026, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Kodpfxsw U Scfo Aniodu Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Condition: used, Year of construction: 2024, color: other, empty load weight: 3 kg, fuel type: gasoline, gearing type: other, NEW SKIP LOADER CONTAINER FOR BULKY MATERIALS, FOR OUTDOOR USE, WITH 2 REAR “BOOK-TYPE” DOORS REF.: 22-N-27 Kedpfovucpxex Aniedu TYPE: Bulky materials C NEW: Yes LID: No OPENING: Rear with 2 book-type doors OVERALL DIMENSIONS TOTAL LENGTH: 5.20 m FRONT SIDE: 1.50 m / 1.70 m REAR SIDE: 1.50 m / 1.70 m SIDE: 1.50 m / 1.70 m EXTERNAL BOX WIDTH: 2.50 m CUBIC METERS: 17 FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOR: Green For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA srl operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and skip loader equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without skip loader cranes. Aurora srl collaborates with SCARRABILI CRC, the skip loader specialists. S.E.&O Given the quantity of advertisements and details included, Aurora invites you to verify the accuracy of the information provided with the sales staff.

Condition: used, Year of construction: 2024, color: other, empty load weight: 3 kg, fuel type: gasoline, gearing type: other, TITLE: NEW DEMOUNTABLE CONTAINER FOR BULKY MATERIALS, OPEN-TOP DESIGN WITH SINGLE DOOR Ref: 22-N-41 TYPE: Demountable C NEW: Yes LID: No OPENING: Rear, single door with hinged and folding panels OVERALL DIMENSIONS TOTAL LENGTH: 6.00 m + 0.20 m INTERNAL/EXTERNAL HEIGHT: 1.50 m / 1.70 m EXTERNAL BOX WIDTH: 2.50 m VOLUME: 20 m³ FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOR: RAL 6029 green The prices shown do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DEMOUNTABLE CONTAINERS operates in the sector of sales and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Kdsdpfsv Aqanex Aniou Specialized in trucks, trailers, and demountable equipment. With a readily available stock of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the quantity of advertisements and details provided, Aurora encourages you to verify the accuracy of the information with the sales staff.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW DEMOUNTABLE CONTAINER FOR CONSTRUCTION SITES, MADE OF HARDOX STEEL, WITH MANUAL COVER, SINGLE REAR HINGED DOOR. ENLARGED HOOK, 600 MM, PLUS REINFORCEMENT AT THE BENDING POINT ON THE FRONT AND UNDERNEATH IN THE CENTRAL PART. REAR EDGE OF 100 MM, AIR RELEASE MECHANISM, AND FLOOR SUPPORTED BY 200 MM BEAMS. Kdsdpfxszmpbzj Aniou REF.: 26-N-16 TYPE: inert materials NEW: yes COVER: no OPENING: single hinged door OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.25 m TOTAL EXTERNAL WIDTH: 2.55 m INTERNAL FRONT SIDE: 1.50 m INTERNAL REAR SIDE: 1.30 m INTERNAL LATERAL SIDE: 1.30 m CUBIC METERS: 18 WEIGHT: 3120 kg FLOOR THICKNESS: 6 mm WALL THICKNESS: 5 mm COLOR: anthracite gray. Subject to errors and/or omissions. The prices shown do not include VAT. Please contact the sales department for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DEMOUNTABLE CONTAINERS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specialized in trucks, trailers, and demountable equipment. With a readily available stock of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the large number of advertisements and details provided, Aurora invites customers to verify the accuracy of the information with the sales staff.

Condition: used, Year of construction: 2024, color: red, empty load weight: 3 kg, fuel type: gasoline, gearing type: other, NEW OPEN-TOP CONTAINER FOR BULKY MATERIALS WITH TWO SIDE FOLDING DOORS ON THE DRIVER'S SIDE AND TWO REAR FOLDING DOORS REF.: 22-N-65 TYPE: hook lift C NEW: yes LID: no OPENING: two side doors on the driver's side and two rear doors OVERALL DIMENSIONS TOTAL LENGTH: 7.45 m EXTERNAL WIDTH OF THE BODY: 2.55 m INTERIOR / EXTERIOR FRONT SIDE: 2.20 m / 2.40 m INTERIOR / EXTERIOR REAR SIDE: 2.20 m / 2.40 m INTERIOR / EXTERIOR SIDE SIDE: 2.20 m / 2.40 m mt    BOTTOM FROM: 5 mmP ARETE FROM: 3 mm COLOR: red The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: Kdsdpevm Erasfx Aniou #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of advertisements and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – manufactured in 2022 – like new, including accessories. For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer based in Itterbeck, Made in Germany), with an upstream bulk material hopper measuring 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Condition: – Like new, barely used – Fully functional – Inspection and test run possible by arrangement Included in delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – “Gantry” for hand sewing machine with roller track, roller mechanism, and aluminum spring balancer (load capacity 4–6 kg) – new price €825 net – 2x hand sewing machine, Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread separator, 90 W) – new price €1,425 net each New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,900 net plus VAT for the complete package, negotiable – VAT can be shown separately. Kedpfez Tda Rex Aniodu Collection & Shipping: – Location: 31848 Bad Münder am Deister – Loading assistance is provided – Shipping via freight forwarder is possible for an additional charge.

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Kodpfx Asz T Ahmsniedu Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Condition: used, empty load weight: 5,710 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, load capacity: 36,290 kg, 20" 30" 40" 45" STORAGE BOX Kdjdpe Aa U R Esfx Aniou MANUAL DRAWER EXTENDABLE FRONT AND REAR LIFTABLE FIRST AXLE

Condition: used, empty load weight: 13,950 kg, maximum load weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2010, suspension: air, tire condition: 20 %, load capacity: 51,050 kg, • Extendable • First liftable axle • Self-steering last axle • Hydraulic outriggers Kdedpfxj Abafwj Aniou • Hydraulic ramps • Winch • Convoy kit • Tie-down rings • Platform height: 93cm • Usable length: 9.75m • Extension: 4.50m • Hydraulic widening system • Width: 2.50 to 3.10m • Rear inclined section: 2.00m • Gooseneck: 2.80m

Year of construction: 2026, condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. Kjdpfx Aoz E Ixajnisdu For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: NEW FERRARI 4-PRONG GRAPPLE FOR HANDLING SCRAP AND BULK MATERIALS WITH HYDRAULIC ROTATOR REF.: 23-ATT-04 MODEL: FSG 90/4 MTR.: WEIGHT: 81 kg CAPACITY: 750 kg VOLUME: 90 liters The prices shown do not include VAT. Please contact the sales representative for an updated price comparison and terms. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS operates in the sector of sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Ksdpfx Aovm Eunsnisdu Specialized in trucks, trailers, and skip loader equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without skip loader cranes. S.E.&O Given the number of advertisements and details provided, Aurora encourages you to verify the accuracy of the information with the sales team.

Condition: good (used), Year of construction: 2021, Active hazardous material container, Protecto – used: Price at location: now only €19,950.00 instead of €29,500.00 (net), plus loading and transport costs! Manufacturer: Protecto Year of manufacture: 2021 Type: Hazardous material container SRC 3.2TA, galvanized Design with collection basin, insert shelves, and a ramp Air conditioning system with cooling, heating, and supply/exhaust ventilation External dimensions (W x D x H): 2985 x 4710 x 2470 mm Internal dimensions (W x D x H): 2770 x 4372 x 2051 mm Weight: 1821 kg Collection volume: 2 x 1000 liters Load capacity: 1000 kg/m² (evenly distributed load) Max. point load (200x200mm): 1.96 kN With DIBt approval Z-38.5-229 For the active storage of temperature-sensitive, water-polluting (WGK 1 - 3) as well as flammable and highly flammable liquids (H224, H225, H226) in conjunction with a technical ventilation system (accessory, not included) and in compliance with the safety distances according to TRGS 510, Media resistance according to DIN 6601 Surface: galvanized Walls and roof elements made of galvanized trapezoidal profiles and strong, galvanized end profiles 1-leaf or 2-leaf door selectable (see separate item) 100 mm ground clearance ensures that the container can be driven under and avoids contact corrosion; entry height 303 mm In addition, thermally insulated on five sides with 60 mm thermal insulation panels, laminated on both sides with galvanized sheets and a non-combustible insulation material, A1 according to DIN 4102 Surface: gray-white (inside) Roof designed for a snow load of 125 kg/m² Drainage via internal rainwater gutters Standing area with removable, galvanized grating (mesh size 44x44 mm) Basin material: Steel sheet S235JR according to DIN EN 10025, galvanized 1-leaf door for hazardous material container SRC External dimensions (W x H): 1290 x 1996 mm Clear door dimensions (W x H): 1240 x 1963 mm Handle set, mortise lock with drill-resistant cylinder, 2 keys Door stop: DIN right Ramp / access ramp, galvanized for hazardous material container SRC/MCS External dimensions W x D: 826 x 1250 mm Kodpoz Tdznefx Anisdu Surface: galvanized Consisting of non-slip sheet metal 3/5 mm Former new price: €35,610.00 (net) Condition: good to very good, only disinfectants were stored inside. Available: immediately Location: 45279 Essen We will gladly send you the detailed documents upon request!

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing Ksdpfozlp Ixox Anijdu For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: good (used), functionality: fully functional, Year of construction: 2018, - Machine in good technical condition Kdodpfx Anez S Nnqsiou - Includes Zato Cayman FCE40R II shear and arm for scrap grapple - Ready for immediate use

Condition: new, container length: 6,500 ft, color: other, overall weight: 15,000 kg, We offer this custom-built half-pipe roll-off container with a hydraulic rear door in a spar-free design. 6.5 x 2.3 x 1.10 = 16.5 cbm Floor / wall made of 5/4mm Hardox ❌1 unit immediately available, color can be chosen❌ Ideal for demolition, civil engineering, or agricultural use! ⚠️ Unfortunately, many dealers advertise using the Hardox brand name but do not use genuine Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Color: as desired Delivery throughout Europe Dimensions: Approx. 16.5 cbm 6500 x 2300 x 1100 mm Possible lengths: 4.30 - 7m Kdjdpfx Anszgdctsisu Possible heights: 900 1000 1100 1250 1500 Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5mm Hardox ® Optionally, in one piece Walls: 4mm Hardox ® Crossbar: INP 180 End profile: Rectangular tube made of S700 Weight approx. 2700kg Also available in S235 "normal steel" with a floor thickness of up to 8mm! --hydraulic rear door, flush-mounted / hydraulic connections on the left -2 telescopic cylinders, optimal working pressure 160- max 200 bar -Oil flow 6-10 liters / minute -raised front cab protection -rounded transition between floor and wall -floor spar spacing 750 mm -spar profile U 80 x 50 mm -all-round tarpaulin and net hooks -primed once on the inside, double-coated on the outside -double-coated, single-color on the outside in the desired RAL color Optionally available: -roll tarp -mechanical / electric Marcolin covering -hydraulic connections on the front wall -bolted fenders -crossbar UNP 220 -lifting bracket Ø 60mm -mesh grille in the front wall -grain / cereal slide

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Ksdpfozfy Ivex Anisdu Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD Kdjdpfx Aew S Ewqonieu • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: good (used), Year of construction: 2020, The material separator from Koch Technik is for sale. The scope of supply includes: the price is per unit, 3 units in stock. Kodpfxjz Nxwvj Anisdu 2 x KEM dosing station, version 3.7 – material locking mechanism – level sensor – hopper – pre-mixer, type G 1 x KEM Touch Material separator complete with the components listed above. Mixer, type G: complete with motor and container. Supply voltage: 230V.

Condition: used, empty load weight: 5,600 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2006, suspension: air, tire condition: 75 %, load capacity: 32,400 kg, • Pneumatic unlocking system • Electro-hydraulic power unit • Sliding carriage Kjdpfs Abadgox Aniodu • Drum brakes

Condition: used, empty load weight: 4,700 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/1999, total length: 12,460 mm, suspension: air, tire condition: 55 %, load capacity: 33,300 kg, • Length: 12.46 m Kjdpfx As Abac Nonijdu • Drum brakes