Used Snow Plough for sale (356)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Pgjdsmhhyajpfx Akfok - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm Pjdpfxoh Ek Das Akfogk - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Psdpfxemhh Anj Akfegk - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Pgeded Tqalepfx Akfek - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm Pgsdpfx Akjfdkb Uofek 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Pgedpfx Akoguk Dkjfok The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Pgodjmhhf Sepfx Akfsk Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) Pgsdpfx Aomhhy Nskfjk - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Pgsdsmidyfjpfx Akfok We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard Psdpfx Akomkixwofsgk = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Pgsdpfx Akofdkbhofok - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) Pgedpfx Akemhh Dtefjk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Pjdpfxoqt Dmyo Akfegk - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Pgodpfx Ajguk Dvjkfok Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. Pgjdpot N Ty Tjfx Akfsk New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), gearing type: hydrostat, Year of construction: 2005, operating hours: 3,102 h, Equipment: all wheel drive, Iceresurfacer: + Dupon + OKAY 3000 + 4-cylinder VW gas engine, 75 HP + All-wheel drive + Hydrostatic drive + Snow tank + Water tank + Side broom + Rink board limiter + Augers / blades + Year of manufacture: 2005 Psdjy Enw Ujpfx Akfegk + 3,102 operating hours Municipal vehicle from first owner. Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: excellent (used), functionality: fully functional, mileage: 19,000 km, power: 164.75 kW (224.00 HP), first registration: 12/1998, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, Equipment: additional headlights, all wheel drive, differential lock, fog lights, trailer coupling, truck registration, MAN TLF 16 / 25 bodywork Metz, all-wheel drive Crew cabin for 1 + 5 Differential locks around 19,000 km Pgodpfx Akjwhfl Usfok First registration 12 / 1998 2400L tank Light mast at front wall of body Perimeter lighting Roof box Storage for power/lighting Snow chains PA cabin S-attack hose reel Branch guard Martin siren system Front flashers New inspections (roadworthiness/emissions/safety) available upon request at extra cost Price upon written enquiry -Sale only to authorities and commercial customers-

Condition: used, mileage: 3,12,656 km, power: 92 kW (125.09 HP), first registration: 07/1992, fuel type: diesel, overall weight: 7,500 kg, color: orange, gearing type: mechanical, number of seats: 2, Year of construction: 1992, Equipment: all wheel drive, Unimog 427/10 Winter service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase 2640 mm * Tires: 14.5R20 * Residual tire tread: V.~90/50% H.~80/50% * 1 diesel tank * Trailer coupling * PTO V+H * Hydraulic connections V+H * Device for snow blade * Raised exhaust Superstructure * Küpper-Weisser HD built in 1992 1.7m3 road salt body * Parking feet included (see photo) * Three-way tipper Cab / Driver's cab * 2 seater * Roof hatch * Rotating beacons Engine / Gearbox * 5,958 cm³ * Manual gearbox Weights * Total weight 7,500 kg * Payload 3,000 kg * Unladen weight 4,500 kg Miscellaneous * German vehicle * 1 previous owner Psdpfxjwyy N So Akfegk New general inspections / safety tests or weight reductions/additions are possible on request. We are happy to assist you in obtaining export/transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Please contact us at ---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors excepted!----Who are we ? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Daily numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Completing customs formalities We are happy to help you with customs formalities.

Condition: used, functionality: fully functional, mileage: 38,000 km, power: 260 kW (353.50 HP), first registration: 06/2022, Year of construction: 2022, operating hours: 1,330 h, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, cruise control, full service history, onboard computer, retarder, trailer coupling, truck registration, Dear Sir or Madam, We are offering a Unimog U 535 with long wheelbase and Hecka flatbed body. Vehicle details: Pgjdsy Exczopfx Akfsk Mileage: approx. 37,500 km Operating hours: approx. 1,330 Engine: 260 kW / 355 HP, 1,380 Nm, Diesel, EURO 6 First registration: 06/2022 Vehicle equipment: - Trailer brake, 2-line system - Wheelbase: 3,900 mm - Comfort steering - Front mounting plate, size 3 - Air-sprung driver’s seat with heating and ventilation - Battery master switch - ABS trailer socket - Front socket, 24V, 7-pin / 5-pin - Reversing warning system - Rearview camera - Universal interface according to E16330 (ES6) - Central locking system - Automatic Shift (EAS) - Hydraulics for tipping platform with tipping cylinder - Hydraulic connectors at the rear, 4-way, cell 1+2 - Hydraulic system, 2-circuit, fully proportional with snow plow relief - Toll recording system - High Performance Engine Brake - Clean-Fix radiator quick cleaning system - Increased towing capacity, ZAA max. 20t and much more. Sale in its current condition and only to commercial customers! Our business hours: Mon-Thu: 07:00 – 15:30 Fri: 07:00 – 15:00 Offer based on our general terms and conditions! Sale to businesses only! Used vehicles / used equipment sold without liability for material defects according to our GTCs! For further questions, I am at your disposal. For inspections and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always on site.

Condition: used, mileage: 1,33,050 km, power: 120 kW (163.15 HP), first registration: 03/2019, overall weight: 2,900 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space width: 1,620 mm, loading space length: 1,430 mm, loading space height: 1,000 mm, total length: 5,254 mm, total width: 1,954 mm, total height: 1,834 mm, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 5617X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide Always over 400 vehicles immediately available at Largest selection - Best price More than 1000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! Single owner, German vehicle, non-smoker vehicle Full service history exclusively at Volkswagen Next service in 36,800 km Comes with 8 tires Winter tires on steel rims As-new snow plow “Schoon Fahrzeugsysteme” Winter service vehicle With road approval Tow bar, permissible trailer load 3,000 kg Bott drawer system in load compartment All-wheel drive Pjdpfxoymcrze Akfsgk ---- Special features: * Composition Media audio system (touchscreen, radio/CD player, MP3, Bluetooth) * Electronic voice amplification (internal communication) * Multimedia interface USB (iPhone / iPod) with AUX-IN * Bluetooth interface for mobile phone * App-Connect * Climatronic 2-zone air conditioning * Interior filter: dust and pollen filter with activated carbon filter * Steering wheel (leather) * Partial leather trim (gear/shift lever and handbrake lever in leather) * Gear/shift lever in leather * Handbrake lever in leather * Winter package * Heated washer nozzles * Washer fluid level display * Heated front seats * Tow bar * Differential lock (rear axle) * Rubber floor mats * Highline hardtop (pick-up) * Comfort tailgate (lockable, pick-up) * Load area coating * Exterior warning chevron tape Standard features: Electronic Stability Program (ESP) Brake assist, ASR/ABS, EDS, Anti-lock Braking System (ABS), Offroad ABS, Brake assist, Electronic differential lock (EDS), Traction control system (ASR), Electronic Stability Program (ESP), Full-size spare wheel on steel rim, Onboard tools and jack, Second row bench seat (3 seats), Third brake light LED, Deactivatable passenger airbag, Driver and passenger airbag, Drive type: all-wheel drive, Left aspherical exterior mirror, Electrically adjustable and heated exterior mirrors, Left convex exterior mirror, Painted exterior mirrors, Rear floor covering (carpet), Front floor covering (carpet), Cloth headliner, grey, Driver assistance system: trailer stabilization program, Hill start/descent assist, Multi-collision brake, Power windows front and rear, One (1) folding remote key, Cruise control system, 6-speed gearbox, Lockable glove compartment, Heated rear window, Interior trims in Deep Inox, Isofix mounts for child seats in rear, Body style: double cab (double-cab), Body style: pick-up, Wheel arch extensions in body color, Black grille with chrome strip, Manually adjustable steering column (height/length), Headlight range adjustment, Facelift model, Engine 3.0L - 120 kW V6 TDI, Multifunction display Plus, Rear fog light, Wheelbase 3097 mm, Smoker package, Diesel particulate filter, Low emissions according to Euro 6, Front and rear mud flaps, Front side airbag with head airbag unit, Electronically controlled power steering (Servotronic), Front seat belts with height-adjustable belt tensioner, Fabric seat upholstery, Rear bumper black unpainted, Daytime running lights, Door seals with dust protection, Exterior door handles body color.

Condition: used, mileage: 34,870 km, power: 165 kW (224.34 HP), first registration: 05/1988, fuel type: diesel, empty load weight: 7,340 kg, maximum load weight: 4,660 kg, overall weight: 12,000 kg, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 9, loading space length: 3,700 mm, loading space width: 2,400 mm, loading space height: 1,500 mm, Equipment: ABS, all wheel drive, cabin, fog lights, power assisted steering, * German vehicle * 1st hand * On Mercedes all-wheel drive chassis * Condition see photos * Original only 34,870 km * Ziegler built-in pump type TLF16/8 * 1,620 liter extinguishing water tank * Hose reel at the rear * Signal system and siren * Box body with shelves and drawers * Body dimensions: L=3,700 x W=2,400 x H=1,500 mm * Double cab with 9 seats * 5-speed manual gearbox * Engine brake Psdevhpykjpfx Akfogk * Longitudinal and transverse lock * Snow chains * Searchlight * Working lights * Tiltable crew cab * 2x Grammer comfort seat * Rear access ladder * Roof rails * ABS * Fog lights * Wheelbase: 3,600 mm * GVW: 12,000 kg * Unladen weight: 7,340 kg * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 62,500 km, power: 130 kW (176.75 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 8,410 kg, maximum load weight: 1,090 kg, overall weight: 9,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, county Haus, 1x comfort seat, double passenger bench, seat heating, rear window, electric window left, electric window right, air conditioning, Telligent gearshift, differential lock, high beam headlights, work lights, rotating beacon, leaf spring suspension, trailer coupling (air + electrics), aluminum fuel tank, low-noise G1, winter service equipment, green environmental sticker. Wheelbase: 3,080 mm. Differential lock on front axle, dual-line trailer brake system, radiator protection grilles behind both radiators, auxiliary heater with engine pre-heating, fine dust and pollen filter, split-range gearbox with work group, torque converter clutch (WSK), VarioPower, pressure and return line at front for hydraulic circuits 3+4, dual-circuit hydraulic system with four chambers, snowplow relief function, acoustic reverse warning, rear-mounted PTO with flange. The vehicle is sold with a flatbed body! Approx. 5,413 operating hours! Pgsdpfx Ajxylpbjkfok Optional: Gmeiner salt spreader available for an additional EUR 6,500 and snow plow -9161- for an additional EUR 1,500! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: good (used), functionality: fully functional, mileage: 7,84,907 km, power: 368 kW (500.34 HP), first registration: 08/2008, fuel type: diesel, empty load weight: 12,750 kg, maximum load weight: 14,250 kg, overall weight: 27,000 kg, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,300 mm, next inspection (TÜV): 12/2026, fuel: diesel, fuel tank capacity: 500 l, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: steel, number of seats: 2, total length: 8,200 mm, total width: 2,570 mm, total height: 365 mm, loading space length: 6,100 mm, Year of construction: 2007, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, Model: SCANIA R500 LB6X2HHZ, RETARDER Leaf/Leaf Suspension 3xPedals V8 Lift Axle First Registration: 22.08.2007 Mileage: 784,907 km (original) Engine Power: 368 kW (500 HP) Bodywork: Multilift 21200 Raisio Hiab 17T 2006: 610 cm Tipping hydraulics (PTO) Auxiliary heater Antenna Radio/Cassette/CD/MP3 Air conditioning 2x air-suspended seats with seat heating and fully adjustable 1x sleeping bunk Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Pgjdpfx Asy D Rwnekfok Sun visor Working lights Fog lights High beam Hazard warning light Toolbox Aluminum fuel tank Gearbox: MANUAL/ADDITIONAL Tank: Diesel (500 liters) Trailer coupling Lift axle EURO 5 Ad-Blue (75 liters) Retarder Axle configuration: 6x2 Differential lock Wheelbase axle 1 and 2: 4,300 mm Wheelbase axle 2 and 3: 1,320 mm Tyre size axle 1 (front): 385/65R22.5 Tyre size axle 2 (rear): 315/80R22.5 Tyre size axle 3 (rear): 315/80R22.5 Leaf/leaf suspension Wheel cover Kerb weight: 12,750 kg Payload: 14,250 kg Gross vehicle weight: 27,000 kg Vehicle dimensions overall (L x H x W): 820 cm x 365 cm x 257 cm Plough mount right side Flat swap system Type HIAB with Laxo attachment DISTANCE MIDDLE LIFTING HOOK TO MIDDLE SUPPORT ROLLERS 502 cm With new TÜV and emissions test by arrangement at extra cost! You can also reach us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. German (Deutsch): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English (English): We speak German and English, but feel free to send us a message in your language! Español (Spanish): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português (Portuguese): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français (French): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue! Italiano (Italian): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский (Russian): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is net! We can deliver your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export plates available upon request! We support you with export, original data confirmation for country homologation, supplier’s declaration, preparation of export documents, and customs number plate production if required. Viewing and test drive possible at any time, including weekends, by prior telephone appointment! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and features of the goods/vehicle. All information given without guarantee. Subject to change, prior sale, and errors.

Condition: good (used), functionality: fully functional, mileage: 8,09,518 km, power: 382 kW (519.37 HP), first registration: 03/2007, fuel type: diesel, empty load weight: 14,670 kg, maximum load weight: 17,330 kg, overall weight: 32,000 kg, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,700 mm, axle spacing: 3,700 mm, next inspection (TÜV): 02/2027, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,300 mm, total width: 2,520 mm, total height: 3,600 mm, Year of construction: 2007, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, trailer coupling, truck registration, Model: VOLVO FH520 -37 8X4 JOAB Hooklift + Steering Axle, Leaf/Air Suspension First registration: 23.03.2007 Mileage: 809,518 km (original)? Engine power: 382 kW (520 HP) JOAB hooklift system Type: L24 5690 AC with remote control (not tested) Tipper hydraulics (PTO) Parking heater Antennas Radio/Cassette/CD/MP3 Air conditioning Air-suspended seat with seat heating and full adjustability 1x bed Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Warning light Toolbox Aluminum fuel tank Transmission: Automatic Tank: Diesel (450 liters) AdBlue (60 liters) EURO 5 Axle configuration: 8x4 Lift axle and steering axle Differential lock Wheelbase between axle 1 and 2: 3,700 mm Wheelbase between axle 2 and 3: 1,370 mm Wheelbase between axle 3 and 4: 1,380 mm Tire size axle 1 (front): 385/65R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Tire size axle 4 (rear): 385/65R22.5 Leaf/Air suspension Wheel covering Retarder/Intarder/Engine brake Unladen weight: 14,670 kg Payload: 17,330 kg Gross vehicle weight: 32,000 kg Vehicle dimensions (L x H x W): 930 cm x 360 cm x 252 cm Container platform length: 6.4 m Plough mounting device on right side and front New TÜV and emissions certification possible by arrangement and at additional cost! You are welcome to contact us for more information and pictures via WhatsApp, Telegram, Viber, and Signal. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates on request! We also support you with export, original data confirmation for local type approval, supplier's declaration, export document preparation, and customs plates if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Pgjdoy D Ru Tepfx Akfjk Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and features of the goods/vehicles. All information provided without guarantee. Subject to changes, prior sale and errors.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB Sand & Salt Spreader RPS 9000 (9 m³) - Winter Road Maintenance The TICAB RPS 9000 is a heavy-duty sand and salt spreader for winter road maintenance, snow and ice control, anti-icing, and de-icing operations. Ideal for highways, municipal streets, parking lots, airports, and industrial surfaces. • 9 m³ hopper for long, uninterrupted spreading Pjdpfxjx Uwp Ee Akfjgk • Hydraulic scraper-chain feed & disc drive for uniform application • Wide spreading width: 4–8 m • Optional cab-controlled proportional disc speed and autonomous engine • Quick mounting on trucks for versatile winter service Contact us for price, delivery, and technical details. Ensure safe roads this winter!