Used Solid Tb 16 S for sale (77,087)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Condition Used, commensurate with age. Scope of Delivery Machine as described and shown in the photos. Inspection / Availability Fgsdpeyucwgjfx Aptjg Inspection possible by appointment. Immediately available – subject to prior sale.

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, power: 992.92 kW (1,349.99 HP), fuel type: diesel, number of cylinders: 16, type of cooling: water, MWM 16-cylinder engine removed from a decommissioned inland vessel. The engine was operational at the time of removal. It has been stored for approximately 11 years. Functionality has not been tested. Fodpfx Apow Aphcstegg Loading is possible. Sale only to commercial buyers and under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Fjdpfexmuypox Aptegg

Condition: used, Year of construction: 1986, grinding length 5000 mm Fodpsyqu A Hofx Aptegg grinding width 2500 mm workpiece height 1600 mm column daylight 2680 mm Passage height 1720 mm table surface area 5500x2240 mm T-slot - distance 250 mm T-slot - width 36H12 mm T-slots 9 workpiece weight 50.000 kg table speed -stepless- 1-40 m/min grinding motor 22 kW turning speeds 960 U/min total power requirement 146 kW weight of the machine ca. 140 t dimensions of the machine ca. 17,5x10,5x6,6 m Peripheral grinding support: 960 rpm, 22 kW Universal grinding support: 7 kW, 500-2900 rpm Crooked grinding device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, ABB Robotics IRB 2400/16 S4C M98 robot Controller: S4C M98 Number of axes: 6 Max. payload: 16 kg Max. working range: 1550 mm Year of manufacture: 2000 Scope of delivery: Robot, controller, cables, teach panel, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers and pictures available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Fgsdozmti Ajpfx Aptsg Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E&N emergency hand pump, parabolic suspension, badge_offroad_wheel Equipment: - Electric pump - Full steel floor - Ramp compartment Net: €6,512.61 / Gross: €7,750.00 Article number: VTB235321711.01 Technical data: • Brand: Variant • Model: 3517 TB • Vehicle type: Three-sided tipper • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 320 x 168 x 35 cm • External dimensions (L x W x H): 475 x 186 x 120 cm • Loading height of the floor: 72 cm • Permissible total weight: 3,500 kg • Unladen weight: 945 kg • Payload: 2,555 kg • Chassis: High-loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Option to insert at all 4 corners for tarpaulin frames, grating attachments, side panel attachments, or front wall extensions • Rear flap can also be used as a swing-away tailgate • Sturdy lever locks • Full steel floor - extremely robust • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Many cross members, resulting in high point load capacity • Additional longitudinal struts, continuously welded • All cross and longitudinal members rest on the floor • 6 lashing eyes inside the loading area (1000 DaN/kg) • U-profile on the rear, for easier attachment of the ramps • Ramp compartment for ramps • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/74AH) in the housing incl. cover • Removable remote control for electric hydraulics • Integrated battery charger and battery charge indicator • Emergency hand pump for manual tipping when the battery is empty • External battery charging socket CEE 230V (connecting cable included) • Parabolic axle from KNOTT • Parabolic axle for ultimate driving comfort! • Reverse automatic • KNOTT overrun device and parking brake • 13-pin connector • Reversing lights • Large safety lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle Fsdpsyyw I Eofx Aptsgg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate Fodpfx Apsyxdwdotegg • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Fgodpfjlvuqfsx Apteg Total length of the table 2750 mm Receiving table length 1200 mm Length of the feeding table 1500 mm Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Sound power level 99.2dB(A) Weight 800 kg

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Fgjdpfx Ajzyymbjptjg Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Max. cutting depth (45° miter cut): 60 mm Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG Fgodpfxozlhp Uo Aptog All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Fgedpfx Apsx Aqdcetjg Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Fgjdewikn Repfx Aptsg Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Gas filling press: Models and triple available

Condition: ready for operation (used), Year of construction: 2013, Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible. Fgsdpouqac Defx Aptog

Year of construction: 2022, condition: used, functionality: fully functional, Solid Fuel Steam Boiler and Accessories- 3 t/hour-8 Bar- Buhar Kazanı ve Ekipmanları Fsdpfx Aey R U T Toptogg Types of Solid Fuel : Coal and Pellet Automatic Weighing System for Solid Fuel, Steam Temperature :172 ºC

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Fsdpfeyb D Dbox Aptogg Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Fedpfx Apjzy I Rbjtjgg Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: used, Technical specifications: Working width: 1100 mm 1 Combined unit Shaft diameter: 200 mm Height of material being processed: 160 mm Fgedpfx Aezza I Ijptsg Dimensions of the abrasive belt: 2300x1115 mm Belt feed speed: 2 speeds Diameter of the dust extraction nozzle: 2x180 mm Electric lifting mechanism Analog display Safety switch Main motor power: 9.5 kW Voltage: 380 V Overall dimensions: Length: 1950 mm Width: 1800 mm Height: 2300 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Fgsdpfxow Hnvtj Aptsg Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm Fgjdpfoww Nccjx Aptsg passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: R95, Used TETRA PAK TBA19 030V 125 slim fille - straw - conveyorTechnical Specifications & Performance DataThis Tetra Pak TBA19 030V 125 Slim is an aseptic carton filling machine designed for industrial packaging and beverage production applications. Manufactured in 2009, the machine is configured with a TSA21 straw applicator and conveyor, providing an integrated solution for filling slim carton packs, applying straws and transferring finished packs to downstream handling equipment.Manufacturer: Tetra PakModel: TBA19 030V 125SlimYear: 2009Recorded running hours: 5000+Included equipment: TSA21 straw applicator and conveyorConformity marking: CEAdvanced Automation & Control SystemsThe filling machine is designed for continuous industrial packaging operation, coordinating carton handling, aseptic filling and pack discharge. The included Tetra Straw Applicator 21 supports the automated application of straws to compatible carton packs. This configuration helps create a more integrated packaging process by reducing manual handling between filling and straw application stages.For commissioning and production planning, the control interfaces, electrical supply, utility connections and operating functions should be verified against the installed machine configuration. Access to the machine and its associated conveyor should be planned to allow safe operation, inspection and routine servicing.Production Line Integration CapabilitiesThis second hand filling machine can form the central filling stage of an aseptic carton packaging line. The included conveyor provides product transfer from the filler area toward downstream accumulation, secondary packaging or coding equipment. Its integrated straw applicator makes the system suitable for lines using carton packs that require externally applied drinking straws.Machine typeManufacturer/modelYearFilling MachineTetra Pak TBA19 030V 125Slim2009Various EquipmentTetra Pak TSA21 Straw Applicator2006Various EquipmentConveyorMachines of this type are typically integrated with upstream product preparation and aseptic supply systems, while downstream equipment may include pack accumulation, coding, shrink wrapping or case packing. The final integration arrangement depends on the carton format, production layout and required packaging flow.Machine Condition & Maintenance HistoryThe machine is offered as ready for operation second hand bottling equipment. Recorded running hours are stated as 5000+. The filling machine was manufactured in 2... Fedpfxezvl Trj Aptsgg

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Fsdeyb Nc Njpfx Aptegg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: Fgsdpfx Asvxhdcspteg - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. Fjdpjulpmzjfx Aptsgg This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: excellent (used), Here we offer you a Kuka robot with a control unit. Kuka robot VKR 16-2 R1610 Control unit VKRC4-SC5 Kuka smartPAD handheld programming device The robot comes from a school and research department. Hour meter: 226.25 hours Axis data: Range of motion: A1 ±185° A2 -185° / 65° A3 -138° / 175° A4 ±350° A5 ±130° A6 ±350° Speed at nominal load A1 200 °/s A2 175 °/s A3 190 °/s Fgedpfxozdiudo Aptjg A4 430 °/s A5 430 °/s A6 630 °/s Technical data: Maximum reach 1612 mm Maximum payload 20 kg Nominal payload 16 kg Nominal additional load carousel / swivel / arm 0 kg / 0 kg / 10 kg Positional repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Mounting position: Floor; Ceiling; Wall; Any angle Mounting area 430.5 mm x 370 mm Weight approx. 245 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Fgjdpfxsxnbr Ij Aptog