Used Tb Sprint 303 for sale (3,561)

Condition: used, Year of construction: 2002, Gathering machine / booklet making Theisen & Bonitz TB ECO A 308 FP + TB Sprint QSM 303 8 stations, manual feeder TB ECO 308 FP Performance: up to approx. 3,100 cycles per hour Maximum book block thickness: 50 mm Stack height per station: 50 mm (5 cm) Paper and format range Maximum sheet size: 310 × 430 mm Minimum sheet size: 105 × 148 mm (DIN A6) Paper weight: 20 to 1,000 g/m² TB B304 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm Kodjzicw Uepfx Alyonc largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, Year of construction: 2000, Gathering machine / booklet making Knodpozictpofx Alysc Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, Year of construction: 1997, offer consists of: Theisen & Bonitz booklet maker - collating unit type 310 (10 stations) - stiching, folding and cutting unit type 303 collating unit type 310: - v-belt drive - suction is adapted to pile height - double-, jam- and misfeedcontrol - safety device - bins: 10 - format: min. 7x10cm, max. 35x50cm - paper weight: 18-800g/qm - capacity: max. 3500 cycles/h stiching, folding and cutting unit type Theisen & Bonitz 303 QSM - folding unit moveable on guide rails Knsde Aa S D Aspfx Alyec - knife unit - photocell check - format cutted: min.65x154mm, max. 350x800mm - capacity: max. 4000 cycles/h - thickness: 5mm edge stitching, 2mm eyelet binding - weight: 550kg - electricity: 220/380 Volt/ 50Hz- 1,5kW - dimension: 147x230cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Knsdpfx Aoxnb Hfelyjc Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut stream delivery Kjdsxnb Agepfx Alyjnc TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Delivery time: immediately from stock

Condition: good (used), Year of construction: 1998, Stitching, folding and cutting machine, Theisen Bonitz TB Sprint 808 08, machine number: 303QS2198, year of manufacture: 1998, 2 Hohner stitching heads, front trim, in good condition, available immediately. Ksdjx S Iwzjpfx Alyjnc

Condition: used, Year of construction: 2013, spindle tunring speed 7.000 U/min weight of the machine ca. 9,8 t spindle hours ca. 48.437 h Knedpfx Ae Advfrjlyoc Number of working hours ca. 33.559 h Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Technical data and specifications are subject to change and errors; subject to prior sale!

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Knodpfx Aljzkgqzjyoc Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 400V, 50Hz, 9.8kW, 15A Kedpfe Aaaqqox Alyonc Weight: 130 kg

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW Knjdpoyf E N Tofx Alysc GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Condition: used, Year of construction: 2020, spindle tunring speed 5.000 U/min weight of the machine ca. 10 t spindle hours ca. 19.485 h Number of working hours ca. 9.037 h Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Ksdpfx Alo Advfxsyenc Technical data and specifications are subject to change and errors; subject to prior sale!

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit • Gluing unit • Roller magazine for roller edges • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling Kodez R A U Iepfx Alyjnc • Glue application • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RPTC 0163, workpiece weight (max.): 16 kg, total width: 750 mm, total length: 1,560 mm, total height: 1,660 mm, input current: 5 A, input voltage: 230 V, Schenck TB Comfort dynamic balancing machine for rotors. The machine is in perfect working order and is currently in use (operation is performed using a computer mouse; the touch function on the display does not work – this is a factory defect of these monitors). Knodpfx Aloz R Tc Reysc The balancing machine is sold with standard supports for balancing rotors with a total weight of up to 5 kg, and with an optional set of supports for balancing rotors with a total weight of up to 16 kg.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, Year 2003 Machine is fully controlled by PLC, almost all settings can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, a second set of cutters is available, various indexable inserts are available. Maximum panel thickness approx. 48 mm, edge banding from 0.3 - 15 mm possible. Chain conveyor renewed approx. 10 years ago. Spray system for separating and cleaning agents, controlled by the application. -Jointing fence, motor-driven, program-controlled. -Jointing cutters 1961, 2 x 2.0 kW. -Gluing system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cut adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel). -Profile cutting blade 2 mm 1929, pneumatically timed. -Corner copying unit 1983, carbide tipped, with adjustment on the control panel, functional, but needs further fine-tuning. -Straight cutting blade 1964. -Swivel unit, controlled by the application. Includes all operating manuals, documentation of the operating points digitally and in printed form by Holzher technicians. A set of DIA jointing cutters is also included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, Year 1995 Mounted on the machine with connection to the pressure bridge. Kodpoz Dxh Nofx Alyonc Easily adjustable from the front control panel, with a rotating device for parts. Adjusted to the feed rate, sensors still available from HOMAG. -Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. -Sale only to commercial enterprises, machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). Kodpfjz R Nq Rjx Alyjnc The balancing machine is sold with 83 adapters for balancing turbines.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RPTC 0149, workpiece weight (max.): 5 kg, total width: 750 mm, total length: 1,560 mm, total height: 1,660 mm, input current: 5 A, input voltage: 230 V, Schenck TB Comfort dynamic balancing machine for rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen does not function – this is a factory defect of these monitors). Kedpfxez R Tiwo Alysnc The balancing machine is sold with standard supports for balancing rotors with a total weight of up to 5 kg.

Condition: used, Year of construction: 2002, overall weight: 5,000 kg, total length: 7,000 mm, total width: 1,700 mm, total height: 1,700 mm, year of last overhaul: 2026, Equipment: documentation/manual, Based on the following description, here is the machine description in Hungarian: Knsdpfxo Aarryo Alysc We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Type: CNC 80/60 E TB MR Year of manufacture: 2002 Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), mileage: 43,014 km, power: 95 kW (129.16 HP), first registration: 03/2002, fuel type: diesel, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro3, number of seats: 3, BELGIAN FIRE TRUCK Kjdpfx Aozdrl Djlyjnc FORMERLY USED BY THE FIRE DEPARTMENT EXCELLENT CONDITION SPRINTSHIFT GEARBOX = Further Information = Year of manufacture: 2002 Engine displacement: 2,148 cc Unladen weight: 2,720 kg Payload: 780 kg Gross vehicle weight: 3,500 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for more information.

Year of construction: 1968, condition: used, Offered is a cam-controlled automatic lathe with bar feeder. Main spindle bore: Ø 60mm. Spindle speed: 160-1600rpm. Speed steps: 11. Distance between centers: 340mm. Center height: 125mm. Equipped with mechanical collet and bar feeder. Inspection possible by appointment. Kedpfx Als Aba Swoyonc

Condition: reconditioned (used), Year of construction: 2010, operating hours: 2,303 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, Hako Hakomatic B30 TB430 scrubber-dryer New 12V 85Ah SIAP gel batteries (2x) Year of manufacture: 2010; operating hours: 2,303 430mm cleaning head (TB430) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger for convenient daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and suction hose New suction motor ensures powerful water pickup from the squeegee Each unit we offer features actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 760 Theoretical coverage (m²): 1700 Tank capacity (l): 30/30 Weight ready for operation (kg): ~179 Power (kW): 1.13 INCLUDED: NEW SIAP 12V 85Ah Gel Batteries (2x) NEW 24V 400W suction motor NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW brush head splash guard Built-in battery charger Squeegee assembly with new oil-resistant blades Knodpfoz Dup Nsx Alyoc Tenzi Normal 5L fluid – FREE KEY FEATURES: 30-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (430 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.

Condition: used, Year of construction: 2004, bore depth 1.200 mm boring range (diameter) 3 - 30 mm control SIEMENS - SPS S7-300 centre height 250 mm turning speed range 375 - 9.000 U/min Deephole Boring Machine | LOCH - TB2 9 1200 Knedpfs Adfm Eox Alyoc The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TB2 |TB-2 | TB 2 9/1200

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Knodpswym Nfefx Alyoc Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Technical details: Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Kjdpfxs Aawvwo Alysnc Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Kedpfxszz I Dke Alyjnc Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Maximum bending radius 200 mm Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, with setpoint/actual value display, automatic angle adjustment and memory function Ksdsz Rn Srjpfx Alyenc Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly