Used Splash Wall for sale (6,351)

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Ljdpfxsxvivqe Ai Hsrr Technical data: see photos Location: ex-site Saarland

Condition: good (used), Year of construction: 1984, operating hours: 2,500 h, functionality: fully functional, volume flow: 4.5 m³/h, type of input current: three-phase, total height: 1,450 mm, overall weight: 110 kg, space requirement width: 800 mm, space requirement length: 1,600 mm, Paint mist extraction system Wiedenfeld Type: WW 455 WK1 Year of construction 1984 in operation until 1992 Triple filtration wet-dry-fine Machine data: Footprint approx. width 1600 mm Depth 800 mm incl. 100 mm wall clearance Height 850 mm + activated charcoal filter 600 mm Return air filter ceiling width 2000 mm Depth 1350 mm Height 220 mm Lodpfjugu Ufex Ai Herr Exhaust air and deflector element for supply / exhaust and mixed air available Control cabinet See pictures for further description and data Accessories: Activated charcoal filter 600 x 600 x 600 mm Filter mats System fully functional Condition used but well maintained

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Lredpfjx Th Ngex Ai Hsr

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Painting booth wall Schuko - 350 Ø - 1750 x 2000 mm - Year of manufacture: 1989 - with side deflector plates Lrjdpfx Asytwlcsi Her - throttle valve in good condition - fan dimensions: 800 x 1330 mm, height 600 mm Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with receiver The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Lredsxv A Dbjpfx Ai Hjr Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Lsdpfoxx Tigsx Ai Herr Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), Year of construction: 2018, total length: 930 mm, total width: 800 mm, total height: 910 mm, power: 9 kW (12.24 HP), input voltage: 400 V, Outer casing and feet in stainless steel. Adjustable worktop height, ranging from 840 to 900 mm. Strong double-walled self-balancing lid,2 mm thick AISI 304 stainless steel cooking pot, with bottom made in compound . Thermostatically-controlled cooking temperature range from 100 to 280°C. Electric model: Armoured incoloy heaters for cooking operations. IPX5 protection against water splashes. Lrodpjtr Ayqjfx Ai Hjr

Condition: as good as new (ex-display), Year of construction: 2026, The compelling advantages: Space-saving, compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area due to air guide plates – making it suitable for larger workpieces. Lrodpsdqc U Hjfx Ai Hor Separation rate of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Easy and quick filter replacement on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan including throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in operation. The IPE double filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² of filter area) due to the folded filter pockets than conventional filter mats. The downstream fiberglass secondary filter only captures the finest remaining particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only after every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors on the floor or from floor pits. Due to this additional intake opening facing downwards, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also simplifies filter replacement here. Standard extraction capacity Easy Paint 7000 Article number 600027 Air flow rate with standard delivery * 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Connection nozzle extraction hose D = 355 mm Width in mm 2845 Overall height in mm 1955 Depth in mm with capture area 1015 Weight in kg 180 Location: In stock in Bitburg Exhibition machine at a special price.

Condition: used, mileage: 3,19,278 km, power: 375 kW (509.86 HP), first registration: 04/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, parking heater, Mercedes Benz Actros 1851 LL GigaSpace L, hydraulic MirrorCam, top design Special equipment: wheel hubs painted white * Supplied voltage converter 2,500 W connected to the on-board electrical system * Inspection performed * Alcoa Dura-Bright aluminum rims * Axle load measuring device * Front axle load 8.0 t * Trailer stabilization program TSA * Work spotlights * Work spotlight rear wall, top of cab * Digital radio DAB / DAB+ * Climate package * Comfort package * Safety package * Visibility package * CB radio * Air horns (2) on cab roof * Electrical preparation in cab 24 V / 100 A * Turning assistant * Active Drive Assist * Cab interior: Extra-Line * Cab with air suspension * Shaving mirror * 150 A regulated generator * 12-speed gearbox G 281-12 * Holder for notebook, integral rear * Comfort telephony (Bluetooth) with inductive charging cradle * Upper comfort bunk, wide * Upper PremiumComfort mattress * Fender, 3-part * Combination tank aluminum: 720 l diesel + 75 l AdBlue * Air deflector, side * Mounting plate / saddle plate 40 mm for 20 t fifth wheel coupling * Reinforced engine brake * Auxiliary drive MB 131-2c * Frame overhang 1,050 mm * Smoker's package * Retarder * Reversing warning, acoustic * Fifth wheel coupling and plate, low maintenance * Interface for fleet management system * Drawer under dashboard * Aerodynamic side panel * Circuit breaker * Driver and co-driver seat, velour * Driver's seat, comfort suspension seat * SoloStar Concept * Electric sun blind for windshield * Sound system * Steel rims 11.75x22.5 on front axle * Stowage compartment, outside left * Socket 24 V / 25 A in co-driver footwell * Additional socket 24 V in co-driver footwell * Socket 24 V in storage compartment, right * Preparation / switch for lifting axle on trailer * Preparation for 4 surround cameras * Preparation for rotating beacon * Preparation for auxiliary headlights * Curtain, sleeper cab * Tilting hydraulic system Further equipment: Mercedes-Benz Actros 5 * Semi-trailer tractor * Axle configuration 4x2 * Cab L GigaSpace, 2.50 m, flat floor * Engine OM 471, 12.8 l R6 diesel * Power: 375 kW / 510 hp * Emission standard Euro 6 * Permissible total weight 18,000 kg * Wheelbase 3,700 mm * Full air suspension * MirrorCam exterior mirror cameras * Active Brake Assist 5 * Attention Assist / drowsiness detection * Lane keeping assist * Differential lock, rear axle * Disc brakes, front and rear axle * Multifunction steering wheel * Electric windows * Lower comfort bunk * Comfort central locking system * Auxiliary heater (water) * Windshield, tinted * LED vehicle outline lights * Flashing LED side marker lights Lsdszwav Repfx Ai Horr * Automatic headlight activation / light sensor * Trailer electrical and brake connection, low * Trailer socket 24 V / 15-pin * Air connection in cab * Heated air dryer * 2-stage air compressor * Truck Data Center 7 * Preparation for toll collection * Preparation for CB radio * Storage compartment above windshield with lid * Storage compartments with lid behind driver and co-driver seat * Socket 12 V in co-driver footwell * Tachograph / EG control unit * Aerodynamic underbody panel * Underrun protection, front * Splash guard, front * Exhaust outlet to the right, outside * Cab hydraulically tiltable * Heated front and approach mirrors Errors, changes and prior sale reserved. We are happy to provide you with further information.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Lrsdpfxof Aaalj Ai Hor ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, overall weight: 39,000 kg, first registration: 02/2020, loading space length: 9,750 mm, loading space width: 2,440 mm, loading space height: 1,900 mm, Schmitz Cargobull SKI 24 SL 9.6 – Three-axle tipping semi-trailer with aluminum box body, approx. 45 m³ Dimensions & Weights Internal box length approx. 9,750 mm, width approx. 2,440 mm, side wall height 1,900 mm Volume approx. 44.8 m³ Permissible total weight 36,000 kg (technical 39,000 kg) Payload approx. 30,280 kg Unladen weight only approx. 5,717 kg (lightweight version) Saddle height unladen approx. 1,250 mm Box / Body Aluminum box body (AK 9.6), inner wall thickness 3.5 mm, rounded lower belt Plastic lining on the floor (12.5 mm) incl. 900 mm extension on side and front walls Aluminum floor 5 mm Front wall inclined at 20° with robust supports for the front tipping cylinder Aluminum combination door 1/1 with door and pivoting function, pivoting frame, and crossbar Automatic, mechanical 4-hook locking system 2 grain slide gates with cover External rubber impact protection profile Work platform with access steps at the front left and ladder for box access Retractable access ladder at the rear A-sign for the transport of waste materials Roll cover / Tarpaulin PVC roll cover tarpaulin with tarpaulin winding profile and side stops Straight cover frame, 2 removable and swiveling crossbars with tension chain Tarpaulin operating rod (2,650 mm), fastening with tension straps and ratchets Chassis / Brakes EXTRA-Light chassis frame 9.6 made of fine-grain steel, welded ROTOS SCB running gear system with disc brakes (approx. 430 mm) 3 x 9-ton axles, air suspension Axle lift 1st axle automatic/pneumatic, electric starting aid EBS 2S/2M electronic braking system with RSP (Roll Stability Program) Automatic lowering during the tipping process, load pressure gauge Lifting and lowering device with AUTO-RESET function Hydraulics: Low-pressure cylinder HYVA (up to max. 190 bar) Wheels & Tires ALCOA aluminum wheels satin, 6-hole Lrjdpfx Aszvi Uaoi Hsr 385/65 R22.5 tires Bridgestone: 1st + 2nd axle road profile, 3rd axle construction site profile Other LED lighting system 24 V with multi-chamber lights, LED side marker lights, 2 separate LED reversing lights Reversing alarm, switched via reversing lights Lateral impact protection, underrun protection, fold-up King pin 2" according to SAE standard, replaceable Tow hitch front left Plastic mudguards with anti-splash dirt flaps Paintwork: Chassis Novagrau, box Pure White (RAL 9010), tarpaulin Red EC type approval with CoC, German registration documents

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Lsdpfx Aisfz Dvcs Hsrr • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Lrsdpfx Ajfz Ax Ssi Her The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame Regular ladder frame in lightweight steel construction with continuous crossmembers. Maximum distributed load of 30 tons evenly distributed over approximately 1.5 m around the center of gravity of the payload. Coupling plate approximately 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337. Coil trough with a length of approximately 9,000 mm (design according to VDI Guideline 2700) for accommodating coils with a diameter of at least 900 mm and up to 2,100 mm. Chassis Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid Activated by pressing the brake pedal 3 times; 30% overload up to a speed of 25 km/h. Operation on the chassis via a switch. Can also be operated from the cab (switch in the cab required - PIN 12). Three-axle unit SAF INTRADISC With disc brakes Ø approximately 430 mm, track width 120. Air suspension with approximately 180 mm of travel. Vehicle tires 6x 385/65 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset approximately 120 mm (ET 120). Chassis components Fifth wheel supports, mechanical, with compensating foot, 24-ton lifting capacity, single-sided operation on the right side when driving. Splash protection system (spray mist suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with mud flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with mud flaps behind the axles. Lateral protection device according to ECE-R73. Storage for 8 square tube inserts, dimensions approximately 340 x 220 x 2,150 mm, installed behind the axle unit. 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function). Air suspension system including 1 lifting and lowering valve, mounted on the left side when driving behind the axle unit. Vehicle height is adjusted automatically. Floor Mounted version on both sides. Steel pallet load securing bars with VarioFix hole pattern (screwed on), on the left and right side when driving, for a width of approximately 2,468 mm (loading height reduced by approximately 20 mm under the outer frame). Flat floor approximately 30 mm thick, multi-layer glued plywood, recessed in the area of the coil trough. Coil trough side walls covered with plywood sheets approximately 18 mm thick. Floor caulked around the entire perimeter. Coil trough cover made entirely of wood, with a flat floor approximately 27 mm thick. Pocket for square tube inserts approximately 80 x 80 mm, arrangement according to drawing A2, 2 pairs on the longitudinal beam in the 1st and 2nd position, 8 pairs in the outer frame. Lodpfx Aezu Uvyei Hsrr 8 pairs of pockets in the coil trough for accommodating square tube inserts approximately 80 x 80 mm, arrangement: 1st pair at the beginning of the trough at the front, 2nd - 7th pair according to standard drawing, 8th pair at the end of the trough. Superstructure Quick clamping device at the front for the side tarpaulin with tensioning shafts and rocker arms. Quick clamping device at the rear for the side tarpaulin with tensioning shafts and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700), tes

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Daily registration in 06/2024 due to the new TPMS regulation Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly slanted with "Load-Lock profile" for tensioning belt attachment 24 ton. 2-speed support winch, one-side operation Side impact protection aluminum Underrun protection galvanized steel Quarter-shell fenders in front of and behind axle unit with anti-spray splash flaps according to EC Ram protection at the rear Spare wheel holder for 1 electric bike, with wheel mounting kit Axles + suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axle/chassis" Reduction in tire wear incl. and fuel consumption 1st axle automatic lift axle, can also be operated electrically from the truck including forced lowering and starting aid, without truck installation Brake system 2-line compressed air Brake system Spring-loaded parking brake EBS made by Wabco, electronic braking system with EBS socket at the front, without connecting cable with lifting & lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on display Wheels and tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light Floor Screen-printed panels approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall Plug-in slats 5 Rows of aluminum V-slats 2 pairs of Vario steel slats, in conjunction with Vario beams for securing loads at the front and rear, then no need for slats in the area of the steel slats Rear portal doors, 2-winged, each with 2 internal espagnolette locks Tarpaulin, with welded-in horizontal and vertical straps Empty weight: 5,960kg Offer and images subject to change Lredpfsri Hihox Ai Hor

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Ljdpfx Aeflpmqoi Hsrr • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" Lodpfx Aezcnugsi Hsrr 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system Lrodpfx Ajzd Eynji Her 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: used, mileage: 7,36,739 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: Lrodpoy T Uucjfx Ai Her - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ...

Condition: used, mileage: 7,14,112 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ... Lodpfoy T Uuiex Ai Hsrr

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Ljdszcv Stepfx Ai Herr Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) Lsdpfek E Tdasx Ai Herr 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Year of construction: 2020, condition: new, PLC microprocessor control Lrodpfofzrapex Ai Hjr • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Lrodpfx Aiefz A D Nj Hor • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, *IMMEDIATELY AVAILABLE* Tandem trailer with steel panel sandwich construction, 30mm wall thickness, braked, 2 lashing rails, 6 lashing rings Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2,700 kg • Unladen weight: approx. 775 kg • Payload: approx. 1,925 kg • Internal dimensions: 355 x 184 x 205 cm (L x W x H) • Overall external dimensions: 515 x 235 x 269 cm (L x W x H) • Loading edge height: approx. 59 cm • Tyres: 185R14C steel rims • Braking system: yes • Jockey wheel: yes • 100 km/h approval: available at extra cost • Incl. vehicle documents Body: • Floor: Finnish multiplex plywood • Walls: 30mm steel sandwich panels • Roof material: 25mm GRP sandwich • Chassis: AL-KO rubber suspension axle • Number of lashing rings: 6 units (750 kg/daN) • Rear door: yes, double-wing • Tailgate: no • Tailgate material: - • Tailgate/door function: rotary bar lock • Rear door/gate opening size: - • Interior lighting: available at extra cost • Support legs: available at extra cost • Overrun device & brake: yes • Frame/chassis: V-drawbar, hot-dip galvanized • Lighting connector: 13-pin • Registration: COC documents Standard Equipment: • Robust V-drawbar, hot-dip galvanized by immersion • Tandem axle • AL-KO overrun device • Floor panel made from Finnish multiplex plywood • Side walls of very solid 30mm steel sandwich panels • Roof made from 25mm GRP sandwich • Twin rear doors • Doors with special sealing profiles, made of hard/soft plastic • Stainless steel rotary bar lock and galvanized hinges • Rear frame and edging made from special aluminum profiles • 8 lashing points in the floor, lashing capacity 750 kg per point • Trailer has lashing rails pre-installed on both sides • Automatic jockey wheel • Reversing automatic • Plastic mudguards • 13-pin connector • Reverse lights • Large-sized safety lighting • Integrated rear fog light • Superstructure: splash-proof • Registration documents: COC papers Optional Accessories – On Request: • Anti-theft device • Rear support legs • 100 km/h approval with shock absorbers Lodsyivbzjpfx Ai Hjrr • Side door • Motorcycle wheel chocks • Motorcycle channels • Motorcycle tie-down straps • Additional lashing rings • Additional slotted rails for tie-down straps & locking bars • Lath rails with rubber coating for tie-down straps & locking bars • Locking bars, steel or aluminum • Interior lighting • Reversing lights • and much more! New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or transit license plates (Germany) can be provided - Export license plates with customs declaration possible Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from us! We have been an authorized dealer & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, mistakes, and prior sale -