Used Spray Wall for sale (7,567)

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Bdsdpfx Aoxvivqoirsi Location: ex-site Saarland

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, 2 rows of paper volume filters approximately 650 x 1,800 mm, Bdedpspvil Tofx Airei internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, subject to prior sale.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWa 20.20 Bdjdpfx Aiofv Hiqorei Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Options/additional cost for: Bdedpfjfn Ndcsx Airoi Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, To ensure a fast and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This allows us to directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Bdedpofr T Eqjfx Airji Options/additional cost for: Transition from square to round: 150 EUR net Paint stop filter mat clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear Customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWi 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Airflow: 10,800 m³/h Bjdpfxsfr T Emo Airjdi Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+180.00 EUR net) Options/Additional cost for: Transition from square to round: 150.00 EUR net Paint stop filter mat clamping rail: 180.00 EUR net Side guide plates with hinges: 590.00 EUR net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. Bjdpfx Aofn Nddeirodi We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm Bodpfxshby Rij Airedi with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation Bsdpsia Ta Rofx Airodi - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Bedjw Rpxcopfx Airsdi Emergency push-button Discharge hopper

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Bjdpjia Ta Asfx Airsdi Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Bdjdpfoia Ta Usx Airoi Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Bedpfxoia Ta Ho Airjdi Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1624x950x2345 mm Bdjdpevz El Njfx Airei Weight 0 kg Total power requirement 1,5 kw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Bdedpfo Agvnksx Airji Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2394x990x3115 mm Weight 0 kg Bjdpfx Aijvz Ewforedi Total power requirement 2,6 kw

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Bedpfe Ahkkhjx Airodi Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,300 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: max. 1,300 mm Number of spray booths: 1 Bdsdpfxe Af Hnts Airei Pump type: Wagner Number of spray guns: 4 MACHINE DETAILS Weight: 7,500 kg Number of transport packages: 7 EQUIPMENT Spray guns Documentation

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Bjdpfxsxhfc Rs Airodi Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,500 kg, fuel type: diesel, maximum load weight: 700 kg, empty load weight: 1,800 kg, fuel: diesel, Year of construction: 2010, operating hours: 2,532 h, HAKO CITYMASTER 1200 4x4 MULTIFUNCTIONAL MUNICIPAL STREET SWEEPER (2010) – EXCELLENT CONDITION + AIR CONDITIONING + HIGH-PRESSURE WASHER INSTALLED EQUIPMENT: Dual-brush sweeping system – Equipped with NEW, stiff PPL 1.8 brushes reinforced with steel wire, ideal for removing debris from public roads, parking lots, and pathways. Hydraulic controls operated from the cabin allow for an adjustable working width ranging from 1318 mm to 2270 mm, while an integrated spray system binds loose dirt and prevents it from becoming airborne. Multifunctional hopper – A versatile 1000-liter capacity hopper, constructed from an aluminum alloy resistant to water (including saltwater), is suitable for a wide range of tasks, such as collecting debris from sweeping, grass clippings, or leaves. The hopper can be filled to its full capacity, and its hydraulic lifting mechanism ensures easy emptying at various heights. Air conditioning and heating – Ensures a comfortable working environment for the operator, regardless of high or low ambient temperatures. Built-in high-pressure washer – Located at the rear of the machine and equipped with a 10-meter hose, this system allows for high-pressure cleaning of various surfaces—from asphalt and paving stones to walls and urban infrastructure elements. Work and spot lighting – Full road-legal lighting for travel in public areas, complemented by optional work-area illumination to enhance operator comfort during dusk or in conditions of poor visibility. Audible reversing alarm – increases safety when operating in public areas and on sidewalks. Windshield wiper with washer, warning beacon, horn, operator's seat with pneumatic height adjustment TECHNICAL DATA: Model: Citymaster 1200 Year of manufacture: 2010 Total operating hours: 2532 h Working width: 1318 mm – 2270 mm Debris hopper capacity: 1000 l / 700 kg Clean water tank capacity: 180 l Net weight: 1800 kg Gross vehicle weight rating (GVWR): 2500 kg Bdedpfe Aggffox Airji DRIVETRAIN: Engine: Yanmar 4 TNV 88 MHW – 2190 cm³ – Diesel Fuel tank capacity (l): 60 Number of cylinders: 4 Power: 33 kW (44.87 hp) at 2600 rpm Torque: 143 Nm at 1560 rpm Travel speed (forward/reverse): 25 km/h / 12 km/h Gradeability: 25% Hydraulic oil tank capacity: 45 l DIMENSIONS: Length: 3944 mm Width: 1188 mm Width with brushes in transport position: 1318 mm Height: 1995 mm Height including warning beacon: 2200 mm INCLUDED: REFURBISHED SUCTION NOZZLE WITH NEW RUBBER SEALS ...with protective covers and a new suction hose leading to the tank Air conditioning Pressure washer with new accessories: pressure gun + 500mm lance + power nozzle + 10m steel-braided high-pressure hose NEW side brushes – PPL 1.8 + steel wire (ACC) (2x) NEW Hankook Vantra Transit RA 58C tires – 195/75 R14 106/104Q (4x) NEW 12V 74Ah starter battery NEW air, fuel, and oil filters, including an oil change service Windshield wiper with washer, warning beacon, horn, and operator seat with pneumatic height adjustment Provide the full gallery of 56 photos upon request

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. Bsdpfx Aez D Efnsirsdi (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Weiss SC 1000/+20IU Corrosion Climate Change Test Chamber Weiss SC 1000/+20 JU Corrosion Climate Change Test Chamber The test system is a combination of a climate test cabinet with variable temperature and humidity and a corrosion test cabinet with a salt spray test. In a time-lapse sequence, susceptible metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Climate operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Relative humidity: 10...98 % RH Temporal humidity deviation: 3...5% RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray via 2-nozzle diffuser, 1.5 x 0.5 m, 80 cm height) Control: Digital measurement and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Bdedoph U Dhepfx Airoi Operating modes adjustable via process controller: - Temperature operation - Climate operation - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls - Drying/ventilation of test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between heating elements approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately beside/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connection power: 13 kW Weight: 1300 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Bdsdpfszhblnex Airsi Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Bdsdpexnpczsfx Airji Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: T-24-0076-00, tank capacity: 17,000 l, total length: 5,160 mm, total width: 2,500 mm, total height: 3,488 mm, inner diameter: 2,200 mm, outer diameter: 2,426 mm, overall weight: 5,300 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, manhole location: top, operating temperature: 150 °C, negative pressure: -1 Pa, overpressure (max.): 4 bar, Equipment: CE marking, Stainless steel pressure vessel (V4A), insulated, horizontal (pharmaceutical vessel for ultra-pure water - Aqua Purificata) Technical data / Dimensions Available quantity: 2 Volume: approx. 17,600 liters Vessel type: Pressure vessel Condition: brand new Food-grade: yes Bdedpfx Aij Ahfnxjrei Design: horizontal, above-ground Internal diameter: approx. 2,200 mm External diameter: approx. 2,426 mm Cylindrical length: approx. 4,600 mm Overall length: approx. 5,160 mm Overall height: approx. 3,488 mm Weight: approx. 5,300 kg Operating pressure: Overpressure/Underpressure Operating overpressure: 4.00 bar Test pressure: 7.20 bar Underpressure: -1.00 bar Wall thickness, bottom: approx. 10 mm Wall thickness, shell / cylinder: approx. 10 mm Bottom clearance: approx. 990 mm Operating temperature: 0-150°C Nameplate available Material / Properties Material, inner shell: Stainless steel Material grade: V4A-1.4404 (AISI 316L) Material, feet: Stainless steel Notes: Bottoms: internally machine-ground Ra < 0.6 µm, electropolished Shell: welds internally ground Ra < 0.6 µm, electropolished Shell internally machine-ground Ra < 0.6 µm, electropolished Insulation Insulation: present Insulation thickness: approx. 100 mm Insulation material: Mineral wool Material, insulation shell: Stainless steel Insulation shell: diffusion-tight, welded Notes: Insulation shell made of material 1.4301 (3 mm) Equipment Stand design: Feet Number: 2 Mounting: fixed Width: approx. 300 mm Length: approx. 2,100 mm Foot height: approx. 957 mm Foot center distance: approx. 3,559 mm Slope: approx. 2 % Bottom type: Dish bottom Front bottom: 3 x Lifting lugs Rear bottom: 3 x Lifting lugs Shell: 1 x Grounding lug (EN 10028-7) 1 x Manufacturer's plate (EN 10028-7) 3 x Insulation membrane 1/2" (DIN 910) 1 x Manhole DN 600, acc. to manufacturer RST. 1 x Sight glass DN 100, HZ-CONNECT (ASTM A270) 1 x Light glass DN 50, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for safety valve DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for pressure gauge DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for pressure transmitter DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for overfill protection DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for level measurement DN 25, aseptic flange NA-Connect (DIN 32676-B) 1 x Nozzle for gas filter DN 40, aseptic flange NA-Connect (DIN 32676-B) 1 x Inlet 1 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Inlet 1 (Lance DN 32), aseptic socket weld stub (DIN 11864-3) 1 x Inlet 2 (Nozzle DN 50), aseptic flange NA-Connect (DIN 32676-B) 1 x Inlet 2 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Spray ball 1 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Spray ball 1 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Spray ball 2 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Spray ball 2 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Spray ball 3 (Nozzle DN 65), aseptic flange NA-Connect (DIN 32676-B) 1 x Spray ball 3 (Lance DN 25), aseptic socket weld stub (DIN 11864-3) 1 x Reserve nozzle DN 40, aseptic flange NA-Connect (DIN 32676-B) 1 x Connection for temperature probe 3/8 inch, weld-in socket (ZETA) 1 x Bottom outlet 1 DN 100, weld-on end (DIN 11866-B) 1 x Bottom outlet 2 DN 40, according to P6008 02-01F 41 1508 Z062 (DIN 11866-B) 1 x Bottom outlet 3 DN 100, weld-on end (DIN 11866-B) Design and manufacture according to EU Pressure Equipment Directive, AD-2000 code