Used Stage for sale (2,515)

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. Nsdpfx Ahevnr Rre Recp The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Ncsdpfevntb Sox Ah Rjp Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Ncodpfx Ahevntmns Rsp Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Njdjt Nhmhjpfx Ah Rocp

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Nodpfx Ahoxu I A To Rocp

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Nodpfxsu Ixt De Ah Rscp

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm Nedpfow U Ty Eex Ah Rocp -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. Ncjdpovvuzcjfx Ah Rsp The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: good (used), functionality: fully functional, Year of construction: 2014, Our machine is for sale as a complete line, including all complementary equipment, due to being surplus to requirements. The line comprises a guillotine, a 5-stage Mega shifanoz, a press, and a dust filter. The shifanoz machine opens and recycles waste, scrap, and offcut textiles. It has a recycling capacity of 1,000 kg/hour. The line is installed at our factory located in the Uşak/Turkey Textile Industrial Zone. CAPACITY: 1,000 kg/hour TYPE: 5-stage TOTAL LINE LENGTH: 30.5 meters PRESS HEIGHT (in line): 4 meters STORAGE HEIGHT (in line): 4 meters Njdpfxjxdhtds Ah Rocp SHIFANOZ MACHINE HEIGHT: 2 meters DRUM WIDTH (in line): 1.5 meters LINE WIDTH: 3 meters

Condition: good (used), Grundfos NBE50125135 Centrifugal pump Non self priming, single stage, centrifugal pumps, with frequency converter and PI controller in the mot terminal box, this enables continuously variable control of the motor speed, 2 in stock Ncjdpfox R U Hyox Ah Rjp

Condition: good (used), Stage lights, spotlights, lamps, searchlights -Ultralite Quadro-500 -Technical data: Nsdpfsb A Nw Tjx Ah Rjcp -Power supply: 15/230 V 50/60 Hz -Lamp: GY9.5 500 W -Weight: 3 kg -Average operating distance: 4-10 m -Swivel range: 45°-45° -Beam angle: Min/Max 8°-37°

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 960 kg, fuel type: diesel, tank capacity: 120 l, color: white, output current: 51 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, continuous power: 25.6 kW (34.81 HP), continuous power (apparent): 32 kVA, total length: 2,250 mm, total width: 960 mm, total height: 1,250 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: RAYWIN - Stage V engine, type of cooling: water, Stage V emission genset Ncedpfewzil Sex Ah Rep

Condition: excellent (used), functionality: fully functional, mileage: 1,34,600 km, power: 115 kW (156.36 HP), first registration: 03/2006, fuel type: diesel, axle configuration: 4x2, brakes: other, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, airbag, differential lock, electric window regulation, truck registration, MOST PROMOSTAR.3 Promotion Mini Semi-Trailer Mercedes-Benz Sprinter 416 CDI with Semi-Trailer for Promotion/Event/Stage Use Njdpfjx Tuiyox Ah Recp Fully wrapped in red / Original color: brilliant silver metallic 9744 MOST Special Vehicles MB 416cdi-P3 416 CDI 2,685 cm³ 160 HP (115 kW) 5-speed manual transmission Mini tractor unit 4x2 Differential lock ABS/ASR Air conditioning Rear view camera 3 seats Bunk/sleeping area 195/70 R15C tires Air brake system for trailer MOST Special Vehicles PROMOSTAR 3 Semi-Trailer/Trailer 2-axle Right side can be opened Event/stage with lighting, stairs, and railing Front area with separate door and access via extendable stairs Additional tent Air-braked Stereo system/TV/HiFi 12V and 220V power supply 12V battery charger 2 axles with 195/50 R13C tires

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 821 kg, total length: 2,150 mm, total width: 1,430 mm, total height: 1,410 mm, Frequency-controlled 2-stage screw compressor 37 kW Working pressure -0.8 MPa (approx. 8 bar) Delivery rate 7.72 m³/min at 0.8 MPa Ncedpfxov Ura Ts Ah Rsp Super soundproof

Year of construction: 2007, condition: used, functionality: fully functional, Metalchem MDI-300 two-stage intensive mixer Nedpfx Ahoqy H Eie Rocp

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Nsdpfeq A T Dwjx Ah Rocp Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Condition: new, Year of construction: 2023, functionality: fully functional, motor manufacturer: FPT, input frequency: 50 Hz, Manufacturer: PRAMAC Sound pressure level at 7m dB(A) : 64 Continuous power: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Nedpfstq Hccsx Ah Rjcp Diesel engine: FPT IVECO F 34 TCA Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 3400 cm³ Intake: Turbo/NK Speed: 1500 rpm Starter: 12V Engine control: Electronic Exhaust gas recirculation, particulate filter, catalytic converter, Consumption 3/4 load: 8.32 liters Consumption at full load: 13.99 liters Generator: MeccAlte ECP32-2M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) DEEP SEA ACP Digital control DGUV TYPE B Higher-level insulation monitor Sockets with Fi type B 1x 63A 400V /5P 1x 32A 400V /5P 1x 16A 400V /5P 1x Schuko Dimensions and weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,250 kg Fuel tank: 209 liters Sound insulation hood: RAL 9016 white Main battery switch Oil drip tray Fuel three-way valve WSP water-separating diesel filter Document holder Galvanized base frame with forklift pockets

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Nodjxt Dqqopfx Ah Recp

Condition: excellent (used), The set consists of 18 elements and was developed as a step for a coordinate measuring machine measuring 6.00 m x 2.50 m. It can also be used as a mobile stage or platform. Ncjdpfxjfg Rkcj Ah Rep Minimum height: 0,5 m edge length largest element: approx. 2.50 m

Condition: used, GENERAL Ncedpfxjxqcluo Ah Rop Miscellaneous: This multi-stage steam jet vacuum pump with surface condensers is an efficient system for generating vacuum in industrial applications. The pump utilizes the energy of steam, which expands through nozzles in multiple stages and entrains the air or gases to be evacuated. The surface condensers condense the steam after each stage to maximize efficiency and minimize energy consumption. This system is commonly used in applications that require a high and stable vacuum level, such as in the chemical industry. Location: Bremen Condition: used

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Nsdpoxf Uukjfx Ah Recp Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: new, Year of construction: 2025, total length: 7,500 mm, total height: 3,400 mm, total width: 3,800 mm, warranty duration: 12 months, inner dimension length: 7,000 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, 🧩 Custom-Built Solution This washing system is manufactured to order. We can customize dimensions, number of stages, heating power, pump configuration, and automation level according to your individual requirements. 🟦 Automatic 5-Stage Washing Machine – Modern Surface Preparation System Modern, fully automatic spray washing system designed for surface preparation of steel and aluminium components before powder coating or other finishing processes. The unit features separate treatment chambers, each dedicated to a specific chemical stage, ensuring optimal cleaning and pretreatment quality for every material. Equipped with top transport rails, independent liquid circuits, and precise control of temperature and process time, this washing system offers high efficiency, repeatability, and low operator involvement. Perfect solution for manufacturers seeking a reliable, energy-efficient and fully automated cleaning system for metal parts. 🔹 Technical Specifications - Working chamber dimensions: 7000 × 1500 × 2200 mm (L × W × H) - Overall dimensions: 7500 × 3800 × 3400 mm - Top transport: 3 rails 60×60×4 - Non-through chamber design - 5-stage process - Independent closed liquid circuits - Washing via pressure pumps and spray nozzles (side and top) - 4 tanks: * 2 heated and thermally insulated (for chemicals) * 2 for water / demineralized water - Tank capacity: 2500 L each Nsdpfoxlzihsx Ah Rocp - Heating power: 2 × 36 kW (electric heaters) - Total electrical power: 90 kW - 5 pumps × 3.0 kW, alternating operation - Automatic transition between washing stages - Adjustable temperature and process time - Power supply: 400 V / 50 Hz 🔸 Features and Advantages - Precise and repeatable washing of steel and aluminium components - Separate chambers and liquid circuits – no cross contamination - Fully automatic control and stage switching - Adjustable temperature and time per stage - Thermally insulated tanks for energy efficiency - Can be integrated with coating or production lines

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 13,800 mm, Year of construction: 2022, operating hours: 3,694 h, Technical information Make of engine: JCB Nsdpfxsxq Ayre Ah Recp Top speed: 29 km/h Empty weight: 11.370 kg Functional Lifting capacity: 4.000 kg Identification Serial number: JCB5A8MGVN3096768 Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Tyre brand: Alliance Transport dimensions (LxWxH): 6.23x2.35x2.59 Additional information Please contact PFEIFER GROUP for more information

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: Ncedpfsx S H U Sex Ah Rop In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: used, lifting height: 64,000 mm, Year of construction: 2022, operating hours: 3,995 h, Weights Empty weight: 86.000 kg Functional Lifting capacity: 80.000 kg Ncjdpfetr Ihujx Ah Rjp Identification Serial number: TE0080CB3095 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 32000 Transport dimensions (LxWxH): 15.17x3.49x3.67 Additional information Please contact PFEIFER GROUP for more information