Used Stahlfolder Ti 52 for sale (1,28,959)

Year of construction: 2025, condition: new, functionality: fully functional, New machine 2 year warranty available in 4 different versions, cutter heads also interchangeable Advantages: + unbeatable price-performance ratio + Already standard: mobile machine, ideal for quick floor mopping + Stainless steel blades + Quickly replaceable, coated cutter head + up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round knives possible!) + even dividing of the dough, excellent rounding of the dough pieces + effective switch-off at the touch of a button + Ergonomic knife cleaning position (head can be swiveled forward by 90 degrees) + Kneading cut-off, pressing time and duration programmable + Digital display, 10 programs can be saved + Quick and easy adjustment of the height of the knit chamber + lateral holder for the knit plate, immediately at hand SERIES accessories: 3 knotting plates included General technical data: Power: 1.3 kW Connected loads: 400V - 3Ph - 50Hz Fuse protection: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (WxDxH) Net weight: 380 kg Size 3-52: Number of pieces: 52 dough pieces Piece weight: 16 - 45 grams (depending on dough) Dough filling: 832 - 2,340 grams (depending on dough) optionally available: - additional kneading plates Surcharge: 110,-- € net / pc. - Additional cutterhead (incl. 3 cutting discs) Ljdpjivdm Uefx Aanoak Surcharge 1.750,-- € net / set

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Ljdpfjghgqpsx Aaneak Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm

Year of construction: 1985, condition: used, 32 mm 12 mm Laodpfx Ajwkvthoanek stroke 330 mm pulling capacity 3,0 t total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition.

Condition: ready for operation (used), Year of construction: 2012, input voltage: 380 V, Description about the machine: Lodpjwrxqlofx Aaneak 2-sided, sheet fed, thin film, thermal laminator for short runs Max sheet size: 53 x 75 cm Min sheet size: 32 x 22.5 cm Max speed: 25 m/min 135 gsm to 450 gsm Quick make-ready Easy operation Small footprint Heavy-duty build quality Feeder Heidelberg-Stahl suction drum Bottom separation, continuous run, top loading Air inflates the sheets from the sides, allowing them to float on a bed of air Operator replenishes sheets on the run, thus providing continuous feed Laminator Electrically heated laminating roller Digital temperature controls up to 120°C (248°F) Rubber counter-pressure roller Choice of manually adjustable hand-cams or pneumatics for nip pressure Film mounted on a quick-change bar Film roll perforating mechanism Sheeter Integral steer & pull separator runs in-line Features include in-feed hold rollers, adjustable anti-curl bar, and variable speed belts Delivery into vibrating jogger table with under-sheet adjustable air control Perfector Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes electrically heated Additional heated roller, quick-change bar, and perforating mechanism for 2nd roll of film

Year of construction: 2001, condition: used, machine/vehicle number: 361748, Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Ljdomikq Hspfx Aaneak Heidelberg PM / SM 52 N&PYear 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), machine/vehicle number: 711 400 N, Heidelberg GTO 52-1 offset printing press, single-color, alcolor, machine number 711 400 N, + version, in good condition, available immediately. Ledjwfm D Hopfx Aanjak If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Condition: good (used), Year of construction: 1993, machine/vehicle number: 709661, Size 35 x 52 cm, Alcolor dampening, Technotrans cooling and recirculation unit, Weko T66 powderspray, Plus version Lasdpfow Inu Rsx Aansk Machine no.: 709661

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Ledpfxev Smr Se Aanoak Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, Lajdpfx Aaewt T Uhonek • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Neuer Schrägrollentisch / Band new inclined roller table Heidelberg Stahlfolder SRT 66 Baujahr / Year 2016 - Serial-No. 0-00284 fahrbar und höhenverstellbar / mobile and height adjustable Der Schrägrollentisch dient zur Überbrückung von Höhenunterschieden und Maschinenzwischenräumen. Außerdem benutzen Sie den Schrägrollentisch als Basisstation für den Cardtipper (mit GWG), den Tapesspender (mit GWG), die OUE-Einrichtung oder zum Gummieren. The inclined roller table is used to bridge height differences and gaps between machines. You can also use the inclined roller table as a base station for the card tipper (with GWG), the tape dispenser (with GWG), the OUE device or for gumming. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lasdpfxjun Nn Re Aanek On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1997, operating hours: 70 h, condition: excellent (used), machine/vehicle number: 201382, Size 36 x 52 cm, Cptronic, Alcolor dampening, Autoplate, Blanket wash, Roller wash, Impressions cylinder wash, Powder spray Ljdpfxehqhbtj Aaneak Machine nr: 201382, Impressions 70 million

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen Lajdpfov N N Scsx Aansk voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, The scope of delivery includes: 01x shelf grate, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (support bar direction) for double shelf rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Support bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh width: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Lodpfx Aaevvhgloneak Note: The grate may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers Ledpfx Aju Ul Uxsaneak laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: used, Year of construction: 1989, working width: 510 mm cutter head: Tersa number of blades: 4 surface table length: 2800 mm adjustment table: hydraulisch / Fußpedal Hollow and pointed joints adjustment: ja read out table hight: Scala read out Hollow and pointed joints: Scala surface fance adjustable: ja motor power: 5,5 kW machine length: 2800 mm machine width: 1000mm Lodjx I Ah Hjpfx Aanoak weight: 1050 kg

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm Ljdpjx Hdq Tjfx Aanoak - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Total length of the table 2750 mm Receiving table length 1200 mm Length of the feeding table 1500 mm Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Ljdpfolvuqfjx Aanoak Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Sound power level 99.2dB(A) Weight 800 kg

Condition: used, Year of construction: 2024, functionality: fully functional, This machine is a bestseller: It focuses on the essentials, delivers exceptional performance, and pays for itself quickly. This is ensured by a high-performance applicator and a maintenance-friendly solution featuring a wrap-around belt and a counterpressure plate. When precision is required for especially tricky products, the machine is equipped with a positioning device to ensure that labels can be placed with millimeter accuracy. Lajdox Niluspfx Aansk

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3515150, turning diameter over cross slide: 450 mm, spindle bore: 52 mm, turning diameter over bed slide: 600 mm, center height: 300 mm, turning length: 750 mm, quill diameter: 90 mm, quill travel distance: 120 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, swing diameter over cross slide: 450 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, travel distance X-axis: 305 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 750 mm, chuck outer diameter: 200 mm, spindle motor power: 17,000 W, Turning machine (Lathe) with driven tools, Y axis and measuring arm. Laedpfxewnp Sxj Aanok

Condition: good (used), Paper cutting guillotine Ideal 5255 The machine is 100% functional, after inspection in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromechanical knife and pressure beam drive Transparent safety covers laser cutting line two-handed cutting start, electronically controlled Ljdjwxtcvspfx Aanjak automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Laedjxz Emvopfx Aanek Weight: approx. 2300 kg

Condition: good (used), Year of construction: 1984, functionality: fully functional, planing width: 500 mm, Equipment: motor brake, Surface planer Martin T52 Year of manufacture: 1984 The machine comes from a training workshop and is in good condition. Speed: 5000 rpm Motor power: 5.5 kW Working width: 500 mm Outfeed table length: 1.20 m Infeed table length: 1.60 m Laodpfx Aaox H Tzzjnsk Table height: 810 mm With SUVAMATIC safety guard (two-piece) Overall dimensions: 2.85 x 1.30 m Weight approx. 1000 kg

Condition: good (used), Platform size: 1200 x 900 mm Lsdpfx Aaspy Duvensak

Condition: good (used), Paper cutting guillotine QZYK 1370 DH-1520 The machine is fully functional, in perfect condition. After inspection, ready to work. Year of production 2022. This is the highest quality copy of the Polar Mohr guillotine. Technical data: Cutting width: 1370mm Stack height: 165mm Programmer with color display Air table Photocells Chrome table surface Lsdpfowt Sr Sex Aansak Ball screw drive of the rear comb Optical cutting line Enlarged side tables with aeration Weight: 4200kg 380V power supply The set includes documentation, a set of tools, a tapping block, a spare knife and one in the machine.

Condition: good (used), Laenge: About 2430 mm Width: About 1520 mm Laodpfx Aaod Nmdfjnok Heithrange: About 540 mm