Used Straightener for sale (763)

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack Predpfx Aovz Smyoirsc -Fixators: for clamping plates / straightening plates, 6 pieces -Height: adjustable -Hole: Ø 40 mm -Price/Delivery: complete -Dimensions: Ø 340/H550 mm -Weight: 45 kg/piece

Condition: excellent (used), 13 rolls, Ø 150 mm strip width: 600 - 2.000 mm strip thickness: 6 - 15 mm design: 4 hi cassette Prodpov S Ad Dofx Airsc

Year of construction: 1975, condition: good (used), 13 rolls, Ø 152 mm Prodpfx Aeg Iii Ajirjc strip width: 500 - 2.000 mm strip thickness: max. 12 mm

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate Prjdpfjhfud Hox Airsc -Clamping plate: with support ribs, on steel frame -Length: 1000mm -Width: 1000mm -Plate thickness: 20 mm -Flatness: see photos (straightening sheath not included) -Transport dimensions: 1000/1000/H830 mm -Weight: 297 kg

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm Podpofiqrijfx Airjrc -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg

Condition: used, Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar Pjdsfbyc Depfx Airorc -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm Predpfx Aijrrl Uorec strip width: max. 1.250 mm strip thickness: 0,6 - 4 mm

Year of construction: 1985, condition: good (used), 17 rolls, Ø 12 mm Pjdpfx Aisbif Edjrjrc plate width: 120 mm plate thickness: 0,1 - 2 mm

Condition: new, Year of construction: 2026, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW Pjdjurni Uspfx Airsrc weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 1000 mm² - Mobile use on casters - Operating instructions

Condition: new, I - beam section - flat steel 100 x 15 (d 450) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50 x 6 (d 1000) mm Podjzx Hd Repfx Airsrc round material 35.0 (d 600) mm bar material dia. max. 70 x 2 (d 1000) mm square material 50 x 50 x 3 mm bending speed 4.5 m/min roll diam. toproll 155 mm bore 50.0 mm total power requirement 1.5 kW weight 400 kg range L-W-H 990 x 750 x 1350 mm Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Podpfx Aiez Ari Torsrc Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,580 h, punching force: 41 t, sheet thickness (max.): 2 mm, CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details. • Application: Serial production of flat sheet metal parts (panels, brackets, enclosures, electrical cabinet parts, etc.) requiring holes, cut-outs, and notches • Process flow: Coil → uncoiling → straightening → positioning → TT punching → HT punching → part cutting → discharge/stacking • Technical specifications: • Sheet width: 60–830 mm • Sheet thickness: 0.5–2.0 mm (version available for up to 4.0 mm) • Maximum coil weight: 5,000 kg • Installed power: 20 kW • Power supply: 3 x 400 V + PE • Frequency: 50 Hz • Punching system: • TT (Thick Turret): CNC punching with standard cassette-type tools for flexible holes/cut-outs/contours • HT (Hard Tool): Second punching section using dedicated tooling for repetitive operations • Space requirements: • Main line footprint: 17.5 x 5.5 m Pjdpfxezynlxs Airorc • Additional space for scrap: 1.5 m • Additional space for HT section: 1.55 m • Machine condition: Fully operational and in production; inspection and trial possible Additional equipment • Included: • Coil positioning carts • Coil uncoiler • Sheet straightener • Control panel for uncoiling/straightening unit and coil carts • Main control panel • Tilting conveyor for selectable product discharge • Transport and stacking module • Safety system with fixed guards and photoelectric barriers • Control cabinet with hydraulic power unit • Tool cassette carts • Hard Tool transport and storage station • Not included: • Punching tools • Tool cassettes • Robot shown in some photos

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Web Width: 80 – 200 mm Flange: 40 – 60 mm Predpoy Any Refx Airjc Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: new, 200 kN stroke length max. 200 mm working feed 10 mm/sec return speed 20 mm/sec 480x1060 mm work height max. 900 mm toolpiece height max. 200 mm total power requirement 2,2 kW 200x12 mm bending capacity max. - round 48x4,0 mm weight 500 kg Overall size 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm Prodpey H N E Nsfx Airjc - Quick change monometer 85 °, H = 200 mm, V = 63 mm

Condition: new, neu ca. 4 Monate ab Auftragse Italien 66700 € 1260.63 € 150 to 500 mm 1.550 x 2.000 mm 800 mm 20 mm/s 3 mm/s 2350 mm 2000 mm 2500 mm 4100 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) Prjdpswirpisfx Airjc No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm Pedpfx Asyv Nnieirsrc tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm Prsdpfx Aoy S Rnijirjc -Weight: 3500 kg

Year of construction: 2026, condition: new, Complete - turnkey roll forming line for perforated scaffolding plank production with high precision and automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This scaffolding plank roll forming line is designed for the production of perforated steel planks used in scaffolding systems and construction applications. The system provides a complete turnkey solution from coil feeding to finished plank output. Engineered for continuous industrial production, the line ensures high precision forming, consistent perforation quality and reliable long-term operation. PRODUCTION CAPABILITY The system is designed to produce: Perforated scaffolding planks Anti-slip plank surfaces Different plank widths and lengths (customizable) LINE CONFIGURATION The production line consists of: Decoiler Straightener Servo Feeder Mechanical Press Perforating & Embossing Tool / Die System Roll Forming Machine (multi-station design) Cutting System Conveyor & Stacking System ENGINEERING FEATURES High precision perforation and embossing system Servo-controlled feeding for accurate punching Multi-station roll forming structure for stable shaping Heavy-duty machine frame for continuous operation Modular and customizable design PLC & HMI controlled automation system OPERATIONAL ADVANTAGES Turnkey production solution High efficiency and production speed Consistent product quality Flexible production for different plank designs Short lead time compared to European manufacturers APPLICATION AREAS Construction industry Scaffolding system manufacturers Industrial platform production Infrastructure projects REFERENCE PROJECTS Images included in this listing show reference installations of scaffolding plank production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request. THE LINES THAT WE ARE EXPERIENCED: Guard Rail Production Lines C, U, Z, And Solar Panel Profile Production Line Logistic Warehouse Traverse Production Line Pedpfjyzfyfjx Airsrc Cable Tray Production Line Market Shelving Production Line Suspended Metal Ceiling Production Line Solar Framing And Racking Production Line Lighting Fixture Body And Lid Production Line Panel Radiator Top And Side Cover Production Line Metal Grid And Planks Production Line Metal Door And Door Frame Production Line PVC Window Gypsum Board Profile Production Line Agriculture And Animal Husbandry Practices Agricultural Vehicle Applications Painting Plant Panel Production Line Automotive Industry Applications Coil Punching Application Household Appliances Industry Applications

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, Heavy-duty cantilever racking, 10 levels – for steel, stainless steel, and long materials For sale: professional 10-level cantilever racking, suitable for storing heavy and long materials. This robust industrial racking system is ideal for the organized and efficient storage of materials such as steel, stainless steel, aluminum, tubes, sections, profiles, and other long materials. The cantilever racking system was used in our production facility and is now being offered for sale due to the cessation of our business operations. Features: - 10 storage levels - Heavy-duty industrial design - Suitable for long and heavy materials - Ideal for steel, stainless steel, aluminum, tubes, and profiles - Organized and space-saving material storage - Very suitable for metal companies, construction companies, and workshops The racking system is currently assembled and can be inspected by appointment. This allows you to see how it was set up and used in practice. Psdpfx Aez H Riqjirsrc If you are seriously interested, please feel free to contact us. Additional photos, dimensions, and information are available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, reverse speed: 25 mm/s, total length: 1,400 mm, total width: 900 mm, total height: 2,150 mm, SPECIAL OFFER – 5% DISCOUNT! MTP C-FRAME HYDRAULIC PRESS – 1000 KN / 102 T Professional MTP hydraulic press with a pressing force of 1000 kN (approx. 102 t), designed for demanding industrial operations such as pressing, straightening, bending, assembly and forming of metal components. The open C-frame design provides excellent access to the working area and facilitates easy positioning of workpieces. The robust welded steel construction ensures high rigidity, stability and durability during operation. Predpfxsyrr Rko Airsc The hydraulic system provides smooth and precise ram movement. The machine is suitable for manufacturing plants, metalworking workshops, tool rooms, maintenance departments and the automotive industry. KEY FEATURES: • Pressing force: 1000 kN (approx. 102 t) • Open C-frame construction • Robust welded steel frame • Hydraulic drive system • Smooth ram operation • Large and easily accessible working area • Designed for industrial applications • Brand new machine • CE compliant TECHNICAL DATA: • Pressing force: 1000 kN (approx. 102 t) • Maximum working pressure: 25 MPa • Maximum opening: 600 mm • Ram stroke: 300 mm • Working table dimensions: 700 × 500 mm • Throat depth: 250 mm • Downward speed: 11 mm/s • Return speed: 25 mm/s • Motor power: 5.5 kW • Machine dimensions (L × W × H): 1400 × 900 × 2150 mm • Machine weight: 2200 kg APPLICATIONS: • Pressing and fitting operations • Straightening • Bending of metal components • Assembly work • Metal forming • Tool room and workshop operations • Industrial production • Maintenance operations TRANSPORT & WARRANTY The machine is brand new and covered by a 12-month warranty. We provide spare parts, warranty service and professional after-sales support. We can arrange professional transport throughout Europe using experienced industrial machinery carriers. The machine is properly secured for transport and can be delivered directly to the customer's specified address. We can also arrange international transport and shipment to countries outside the European Union. METAL TECHNICS POLSKA Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We provide technical advice, spare parts and comprehensive after-sales support. Contact us for the current price, machine availability, transport costs or an individual commercial offer.

Condition: used, Year of construction: 1996, Straightening machine manufactured by GSW, type RMZ 50/54. Press force approximately --- tons. Year of manufacture 1996. Concise summary provided – a full technical translation will be provided if required for this lot. Prjdpjzypt Dsfx Airec

Condition: used, Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Prodpsh I Nrqsfx Airsc Wire feeder Clear text display Press force monitoring Wire straightening device Bosch wire stripping devices Holder and brush motor with integrated tool W32/1-32 Soundproof cabin Former for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 RPM Press force / stamping unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1988, Technical data: - Strip thickness: 0,6 – 4,0 mm - Strip width: 600 –1550 mm - Coil I.D.: 508 –610 mm - Coil weight (max.): 25 ton - Coil O.D.: 2000 mm - Side trim: 3-9 mm - Working Speed: 100 – 200 m/min - Cutting shaft diameter: 180 mm - Knive OD: 300 mm - Max. Number of cuts with thickness 0.9mm: 25 Cuts - Max. Number of cuts with thickness 4mm: 3 Cuts - Average production previous owner: 10 coils/shift (8 h) Scope of supply: - 25Tn loading car with 2 loading positions - 25Tn Single mandrel uncoiler with - Supporting arm unit - Snumbber roll - Coil opener - Entry straightener with hydraulic Shear - Intermediate guiding table with vertical centering rolls - Circular shear: - With 180mm shaft diameter - Quick-change system with 2nd shaft on-line - Loop table with hydraulic cover - Strip guiding axe with spacer - Pneumatic felt-press brake - 25Tn Single mandrel recoiler - 25Tn exit unloading car - 25Tn coil 1 arm turnstile - Scrap recoiler - Electrical cabinets & operator panels - Hydraulic group - Safety barriers and photoelectric barriers - Stairs, passages, and accessories - Documentation and manuals - Complete set of tooling (quantities to be confirmed) * Strip thickness: 0,6 – 4,0 mm Pedpfjz Tylvox Airsrc * Strip width: 600 –1550 mm * Coil O.D.: 2000 mm * Coil I.D.: 508 –610 mm * Coil weight (max.): 25 ton * Working Speed: 100 – 200 m/min * Cutting shaft diameter: 180 mm * Knive OD: 300 mm

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Predpfx Aozf Nbxoiroc

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Podpfx Aei El Ucoirjrc