Used bolster plates for sale (453)

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Duelhcjzcn Iyjdwyou T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2023, dimensions 0,70 x 0,50 x 0,10 m weight 200 kg In our assessment, the zero-point clamping system is in good used condition. There are 2 units available. Price per unit Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Duolhcdjzbvi Newyeu Prior sale is reserved.

Condition: good (used), Year of construction: 2012, Clamping plate, marking and scribing plate, scribing plate, cutting table, cutting liner Duolhcdjzbqkzswysu -Clamping plate: Cutting table -Support surface: with 5° angle divisions -Sheet thickness: 20 mm -Dimensions: 965/965/H565 mm -Weight: 168 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Mounting plate: with T-slots Duolhcezbl Ihedwyeu -Length: 3045 mm -Width: 1300 mm -Height: 770/970 mm -Groove width: 23 mm -Slot spacing: 265 mm -Dimensions: 1300/3045/H770 mm -Weight: 2300 kg

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Dujlhcotqgnyedwyju Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm Duelhcdwozbhqxoyeu -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Dujlezbhn Dshcdwyju -Mounting plate: with T-slots -Length: 3050 mm -Width: 3000 mm -Height: 445 -Groove width: 28 mm -Slot spacing: 275 mm -Dimensions: 3050/3000/H445 mm -Weight: 4000 kg

Condition: good (used), 2 used T-slot angle plates Duolhoy Iakfscdwyou Height: 1500 mm Width: 1000 mm Depth: 500 mm 10 transverse slots 3 longitudinal slots First-class surface finish

Condition: good (used), Clamping plate with T-slots, plate panel, welding table, T-slot plate, clamping plate, scribing and marking plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: T-slot plate with solid base frame -Length: 3030 mm Djlhcoza Sxwodwysuu -Width: 3000 mm -Groove width: 25 mm -Dimensions: see photos -Overall dimensions: 3030/3000/H500 mm -Weight: 4500 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate on solid base frame -Length: 3200 mm Dolhcdwsv D Hkreysuu -Width: 1625 mm -Groove width: 30 mm -Dimensions: see drawing in the photos -Dimensions total: 3200/1625/H720 mm -Weight: 2300 kg

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, Duslhcdwjyn Rc Rjyeu -T-slot plate: Mounting plate with T-slots -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg

Condition: used, Technical details: floor-plate length: 3160 mm plate width: 2700 mm plate height: 410 mm Plate thickness: 410 mm weight of the machine ca.: 8,0 t Clamping plate for sale Material cast steel/profiled cast iron Finished surface T-slots according to DIN 650: a=41.5; h=72.0; b=70.0; c=28.5 mm Center stand 300 mm 11x through holes Ø 32 x 60 mm 2x fixing holes at the front Ø 41 mm * Delhju Ni Dijcdwysuu

Condition: used, Technical details: floor-plate length: 1345 mm Dolhcdju N Dg Sswysuu plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Duolhcdju N D Dwswyeu Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 205 mm plate width: 195 mm Plate thickness: 65 mm 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm * Dslhcdou N D H Ejwysuu

Condition: used, Technical details: floor-plate length: 3500 mm plate width: 1500 mm plate height: 345 mm weight of the machine ca.: 3,7 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 1,5 x 0,35 / pro Platte m Es stehen 4 Aufspannplatten zum Verkauf. There are 4 clamping plates for sale. Manufacturer: MORA-Meuselwitzer Guss Material cast steel T-slot according to DIN 650: Duslhcdwoval Iujyju a=13.5; h=24; b=24.5; c=11mm one long side surface finely milled 2x plates are equipped with guide rails *

Condition: used, Technical details: floor-plate length: 7040 mm plate width: 2230 mm plate height: 330 mm weight of the machine ca.: 12800 / Stück kg 2 pieces of cast steel plates for sale free. Surface finished Duolhcdeu N Dl Iswysu T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm The plates are equipped for side mounting/clamping connection. Through holes 11 pieces Ø 28mm continuous with counterbore Ø 600mm x 260mm and 12 pieces Ø 28mm continuous with counterbore Ø 114 x 270mm. Our price per plate. *

Condition: used, Technical details: floor-plate length: 470 mm plate width: 340 mm plate height: 120 mm weight of the machine approx.: 107 kg space requirements of the machine approx.: 470x340x120 m from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm Dujlhcdweu N Dn Noysu T-slot centerstand = 125mm - side-slot left and right = width: 20mm *

Condition: used, Technical details: floor-plate length: 385 mm plate width: 205 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Dslhcdsu N D Hrowyeuu *

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing Dujlju N D Icohcdwyou T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: Duelsu N Dhishcdwyju floor-plate length: 800 mm plate width: 455 mm plate height: 75 mm weight of the machine ca.: 264 kg transport dimensions LxWxH: 800 x 455 x 250 mm ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 16mm, pitch circle Ø 160mm - clamping slot diagonal according to DIN 650 ( a=19mm; h= 25mm; b= 38mm; c= 16mm - below with support plate = distance approx. 410mm *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 700 mm Dslou N Dyrehcdwyouu plate height: 85 mm weight of the machine ca.: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm Dujlsu N D Rdehcdwyeu with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Technical details: floor-plate length: 660 mm floor plate width: 450 mm floor plate height: 70 mm passage opening in table: Ø 115 mm weight of the machine approx.: 111 kg space requirements of the machine approx.: 660x450x70 mm fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm Djlhcdou Nkpyowyouu *

Condition: used, Technical details: floor-plate length: 1500 mm Deloval Ihehcdwyeuu plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 1,1 / pro Platte t transport dimensions LxWxH: ca. 1,5 x 1,3 x 0,3 / pro Platte m There are 4x clamping plates for sale. Material cast steel T-slots according to DIN 650 a=21.5; h=40; b=38.5; c=17mm Center distance 250mm *