Used Suprasetter 106 for sale (1,336)

Condition: good (used), Year of construction: 2002, A-3900-Trepko-DoubleCup-fillingmachine Trepko filling machine for cups type 106 K.S. (P) Year of production: 2002. Capacity 10.000 pieces/hour Cup dimension Ø95 2 pieces of tools Can work with double tools/cups (see photos) Knjdped Iytxefx Akloa CEE machine, incl. complete electrical documentation and Mechanical documentation. Robot packing machine and other equipment can takes with that. Sale complete line: Spoon applicator. Case erector Norway. Robot for stacking in cartons. Palletizing. Stationed: Denmark Can be take from function Juni 2019.

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. Knsdpfexl Taljx Akloa - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Kjdpoyhn Uqjfx Aklona

Condition: refurbished (used), machine/vehicle number: SC03, PJ.105.100F/0x Schneider Servo Controller for M10 Drive Motor of Suprasetter A52/A75 >2009 (GEN III) second-hand (refurbished) Knjdpsy En Utjfx Akloa All offers are subject to prior sale

Year of construction: 2009, condition: good (used), PL.551.1000 Termotek Chiller for Heidelberg Suprasetter 105, cpl. second-hand, tested All offers are subject to prior sale Kedpfxoyir Uds Aklena

Condition: good (used), functionality: fully functional, PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor, Heidelberg Suprasetter A105/74/105 Classic second-hand, tested Knjdpeyitl Dsfx Aklja All offers are subject to prior sale

Condition: good (used), PL.572.3100-01 Schneider Servo CTP Controller Knsdpfx Ajyitbxoklea for M10 Drive Motor second-hand for Suprasetter A-models (GEN II) All offers are subject to prior sale

Condition: excellent (used), MV.059.116-02 (old no. PL.125.0000) Plate Detection Sensor for Suprasetter 74/105/A52/A74/A75/A105 second hand, tested Kodpfxjgzbw Re Aklsna All offers subject to prior sale

Condition: excellent (used), PJ.187.100 Chiller Unit cpl. for Suprasetter A52/74/75/105 Knjdpfx Akegzbwmjlea second-hand, tested All offers are subject to prior sale

Condition: excellent (used), Nearly all Suprasetter Spareparts for A52/74/75/105 and Classic and Suprasetter Laser Moduls, second hand, tested All offers are subject to prior sale Knedpjflwxvjfx Aklea

Year of construction: 2012, condition: like new (used), MV.055.656/03 M10 Drive Motor for Suprasetter A52/A75, (new model >2009) Kjdjinuyxjpfx Akljna second-hand, tested

Year of construction: 2010, condition: like new (used), Suprasetter A52/A75, 4-up Manufactured 11/2010 1 Laser head, GEN III, 160mW 2400 dpi, up to 22 plates/hour Min. plate format: 240 x 240 mm Max. plate format: 676 x 760 mm With Prinect 7.51 Knodpsgyxcgsfx Akloa Installed on DELL PC with Stacker advant 36

Year of construction: 2013, condition: like new (used), Termotec 850 cooling system for Heidelberg Suprasetter - Year of manufacture: 2013 - Like new condition - New generation Kjdod Rimijpfx Aklsna

Year of construction: 2007, condition: excellent (used), Heidelberg Suprasetter 52A - Year of manufacture: 2007 - 81,800 exposures - Laser head GEN II, 2400 dpi - Bridge Ksdpfxeirtdlj Akljna - Stacker advand 26 - Prinect RIP software installed on PC

Year of construction: 2010, condition: like new (used), Heidelberg Suprasetter 52A -Year of manufacture: 2010 -Laser head: GEN III -Bacher punching system -10,300 exposed plates Knsdpfjirmmdsx Aklea -Prinect RIP software installed on PC -Developing unit -Stacker advand 28

Condition: reconditioned (used), Heidelberg punching pair for Suprasetter. Kedpfx Asd Ay Icekljna

Condition: new, range L-W-H 1066 x 460 x 940 mm weight 80 kg 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg Ksdpfoupxu Aex Aklona

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Ksdpfx Aoyrnhxjkljna Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 156694, total length: 1,200 mm, total width: 850 mm, total height: 1,100 mm, motor manufacturer: Sabroe, volume flow: 339 m³/h, Used Sabroe SMC 106 S reciprocating compressor for Freon. Complete with pressure switches/gauges and sight glass. The compressor has a displacement of 339 m³/h. Kedsx Ap Nkepfx Aklsna Specifications Brand: Sabroe Model: SMC 106 S Refrigerant: Freon Displacement: 339 m³/h Year of manufacture: 2015 Weight: 925 kg Dimensions: 1200x850x1100 mm (LxWxH) Performance: (0ºC/+35ºC) – 308 kW (-10ºC/+35ºC) – 197 kW

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm Knsdpfxsyaq S Aj Aklja

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Kjdpfx Aozt H Tnjklsna Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Knjdpszrfdiofx Aklja Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: used, axle configuration: 3 axles, first registration: 03/2012, color: other, Year of construction: 2012, Empty weight: 7.600 kg Axle 1: left 7 mm right 6 mm Axle 2: left 6 mm right 9 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!  Knedpfozvbivex Aklsa

Condition: good (used), TMZ F-102 76x106cm die cutting machine Knsdoziytmjpfx Aklea The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Serial number: 8293 Press force: 120 tons Bending length: 3100 mm Maximum stroke: 260 mm Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Kodpfxszk Epvo Aklena Weight: 7500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm