Used Hurco for sale (126)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M242-06206013CFA, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table length: 760 mm, TECHNICAL DETAILS Cgjdpfx Asy Dglnsa Net Travel X-Axis: 610 mm Travel Y-Axis: 508 mm Travel Z-Axis: 610 mm Spindle Nose to Table: 152 - 762 mm Table Clamping Surface: 760 x 510 mm T-Slots (DIN 650): 5 x 18 H8 x 100 Table Load Capacity (evenly distributed): 1,500 kg MACHINE DETAILS AC Voltage: 400 V Phases: 3 Frequency: 50 Hz Connected Load: 18 kVA Largest Motor: 7.5 kVA

Condition: excellent (used), Year of construction: 2014, Hurco VMX42i vertical machining center Year: 2014 WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travels X-axis 1067 mm Y-axis 610 mm Z-axis 610 mm Tool holder SK 40 Cgedpsyuc Nvofx Aa Not Spindle speed max 12000 rpm Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter Accessories/options: - Through spindle coolant - Tool holders - Documentations - Remote control - Swarf conveyor Under power in our warehouse!

Condition: used, turning diameter 256 mm turning length 483 mm greates pass round over bed 548 mm swing diameter over slide rest 320 mm Cgjdpjy I Dg Dsfx Aa Not length between centers 584 mm x-axis 203 mm z-axis 508 mm spindle tunring speed 4.800 U/min number of tool places 10 Pos. The machine has a "DONGLE READ FAILURE" error (see photo) and is therefore being sold as defective! Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: VMX1-06203123BEB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, rapid traverse X-axis: 19 m/min, rapid traverse Y-axis: 19 m/min, rapid traverse Z-axis: 13 m/min, nominal power (apparent): 13 kVA, controller manufacturer: HURCO, controller model: ULTIMAX, total height: 2,600 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 355 mm, table length: 760 mm, table load: 340 kg, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, HURCO VMX 1 CNC vertical machining center - Note: Without the vises shown in the photos! Attention: The item must be collected between 23.06. and 25.06.2026 on a date to be arranged. Cgsdpfx Aey Iwnzea Nst FCA D-73230 Kirchheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,050 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details. Csdpoy Nab Hofx Aa Nsgt • Operating hours: 2,050 h Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h Csdey Naacjpfx Aa Negt Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,398 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 750 kg, overall weight: 4,800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30i was manufactured in 2017. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 15 kW, providing efficient machining capabilities. The machine includes a tool magazine with 24 positions and a robust table size of 1020 × 510 mm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30i vertical machining centre we have for sale. Contact us for further details. • Control: Hurco WinMax • Operating hours: 10,398 h • Table size: 1020 × 510 mm Technical Specification Cgedpsy I Uyzsfx Aa Not Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 1,750 mm, total width: 4,600 mm, table load: 1,100 kg, overall weight: 6,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, product length (max.): 3,800 mm, number of axes: 3, This 3-axis Hurco VMX 42 vertical machining centre was manufactured in 2004. It features a table clamping surface of 1270 x 610 mm and travels of 1060 mm in the X-axis and 610 mm in both Y and Z axes. The machine has a maximum table load of 1100 kg and a spindle speed range of 10 - 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 machine we have for sale. Contact us for further details. • Table clamping surface: 1270 x 610 mm • Spindle power: 7.5 kW (100% ED), 15.0 kW (30% ED) • Spindle torque: 238 Nm at 625 rpm (30% ED) • Programmable feed rate: 3.0 – 7600 mm/min • Adjustable feed rate: 3.0 – 11,400 mm/min • Rapid traverse X/Y/Z: 30 / 30 / 20 m/min • Pull stud: DIN ISO 7388/11 Type B • Max tool diameter (full/adjacent empty): 80 mm / 160 mm • Max tool length: 300 mm • Tool change time (chip-to-chip): max 14 s • Tool changer: Automatic, 24 stations • Control: Ultimax 4 with dual screens (text and graphics) • Software: Conversational and ISO-code programming • Hardware: Pentium technology, 1.6 GB hard drive, 64 MB RAM • Electrical connection: 38 kVA, 400 V, 42 A • Compressed air: 6 bar / 0.3 ccm/min • Condition: Z-axis drive malfunction Additional equipment • Coolant system • Coolant wash gun • Chip flushing system • Chip enclosure • Chip conveyor Cjdpfx Aajy I Ad Ij Nsgt • Signal light • Machine light • Machine feet Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Cgedpfx Aey Du I Roa Njt Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: used, Year of construction: 2015, functionality: fully functional, Travel distances X-axis travel: 290 mm Z-axis travel: 560 mm W-axis travel: 640 mm Y-axis travel: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. swing diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feedrates X-axis feedrate: 24 m/min Cedpfx Ajy Dgfbja Nsgt Z-axis feedrate: 30 m/min W-axis feedrate: 30 m/min Y-axis feedrate: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Index time: 0.16 s Sub Spindle Sub spindle max. speed: 6,000 rpm Sub spindle torque: 70 Nm MACHINE DETAILS Electrical connection values: 66 kVA / 95 A / 400 V Pneumatic connection values: 7 bar / 150 l/min Weight: 7,000 kg Operating hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channels Chip conveyor Tool measurement arm (Tool Setter) Transformer Cooling unit Coolant tank Fixed and driven tool holders Replacement main spindle (unrefurbished) Various collet chucks, size 65 Documentation (circuit diagrams, operator's manual, etc.)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,240 mm, table load: 2,000 kg, overall weight: 7,950 kg, spindle speed (max.): 12,000 rpm, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, it's ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine. • Spindle face to table: 101–711 mm • Table working surface (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 • Automatic tool changer (ATC) positions: 30/40 • Machine status: Powered and in operation • Total machine hours: 6700 Additional equipment • Chip conveyor Cjdpfx Aasx D E Acj Njgt • Mist collector • External emulsion tank with filtration for internal tool cooling • Including workpiece and tool probes • Programming extensions dwg-dxf Dimensions Machine Depth 5059 mm

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Cgjdeiv R Hljpfx Aa Njt Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: good (used), Year of construction: 2003, functionality: fully functional, Controller ULTIMAX4 DSM Double screen Cgjdpfxjxwmgis Aa Nst Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 10000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip auger - SW options: pocket islands, rigid tapping, DXF, Ultipro - machine mounths

Condition: excellent (used), Year of construction: 2010, Winmax control Cgjdoy Ehlxjpfx Aa Not Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-position turret with driven tools VDI 40 Chip conveyor, IRCO short bar loader IRS-RBK 1001 Tool measurement Parts catcher

Condition: used, Year of construction: 2021, x-travel 1270 mm y-travel 660 mm z-travel 610 mm weight of the machine ca. 8680 kg Cjdpjy Nfabofx Aa Njgt

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,991 h, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine. Cgodpox Enl Eofx Aa Nst Additional equipment • 24-fold changer • Chipping screw • Electrical handwheel • Incl. KITAGAWA round table • IHK 30 bar Machine Benefits Technical Machine Benefits • Table size: 760 x 510 mm • Spindle cooling: yes • Number of tool positions in atc: 24 Extra Information Machine still under power

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 610 x 508 x 610mm, Table 762 x 508mm, Spindle speed 40 – 8000 rpm, Spindle taper CAT40, Codey Ex Haopfx Aa Njgt 24 ATC, Rapid feedrate 24/30m/min, Spindle motor power 12/9kW, Low volt light, Hurco control, coolant.

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale here. Travel: X-axis: 1270 mm Y-axis: 510 mm Z-axis: 510 mm Cgedpfsyhw Eajx Aa Njt Control: Max5 Taper: SK-A40 Max spindle speed: 12,000 rpm Transport weight: 4,550 kg If interested, please call. Sale on behalf of customer.

Condition: like new (used), Year of construction: 2019, First installation delayed due to the pandemic in 2021 MAX5 control system with two 19-inch screens Table size 1020 × 510 mm Max. load capacity 1000 kg X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 610 mm Drive power 13 kW Speed ​​range 10 - 12000 rpm ATC magazine 30-positions Spindle type SK40 Rapid traverse X/Y/Z = 35 / 35 / 30 m/min Feed rates 3 - 15200 mm/min Weight 4900 kgs Dimensions L x W x H = 2450 x 2650 x 2700 mm Equipment, accessories - Software options: 3D, DXF, NCPP/ISNC Ulti-Motion, Solid Model Import, Job List, Pocket/Island, Rigid tapping, Graphical Simulation - Coolant through spindle 20 bar, - Glass Scales on all axes, Csdpeyxb Dhjfx Aa Negt - Chip Conveyor - Portal Handwheel - Machine mounts The machine is nearly in new condition. Available for immediate sale. Currently powered up in Hungary.

Condition: good (used), Year of construction: 2005, Hurco VMX 64/40T Year of manufacture: 2005 Control: Ultimax Travel: X-1630 mm, Y-860 mm, Z-760 mm Spindle speed: 10,000 rpm Codey Ia Rlspfx Aa Nogt Spindle coolant Tool changer: 40 positions Chip conveyor

Condition: used, Year of construction: 2018, functionality: fully functional, Year of manufacture: 05.06.2018, max. spindle speed: 10,000 rpm, net weight: 3,070 kg, total weight: 3,500 kg, operating hours: machine: 8,678:16 h, spindle: 3,567:18 h, external dimensions: 2,500 x 3,000 x 2,500 mm, equipped with MAX 5 single controller, WinMax software, 1 x 19" LCD color monitor, high-pressure coolant system for through-spindle coolant supply, emulsion coolant, coolant pressure 10 bar, 20-position automatic tool changer. Note: Tools and tool holders are not included in the scope of supply. Integrated hydraulic tool clamping system with workpiece length measurement via probe and tool length calibration via laser, RENISHAW OMP60 workpiece probe system, RENISHAW NC4 laser tool setter system, chip conveyor screw, including digital operating manual on USB stick. Condition note: The machine was never used for hard metals, only for copper. Cgjdpfsy Ht U Iox Aa Njt

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-5070, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table width: 660 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Hurco VMX50 vertical machining center, year of manufacture 2006. Manufacturer: Hurco Model: VMX50 Year: 2006 CNC milling machine Hurco VMX 50 | YOM 2006 | SK40 | Chip conveyor | Spare parts For sale is a CNC machining center Hurco VMX 50 (year of manufacture 2006). The machine is well-maintained, in good condition, and immediately available—ideal for workshops, subcontractors, or training facilities. Technical Data Manufacturer: Hurco Model: VMX 50 Year: 2006 Control: Hurco Ultimax Travel (X/Y/Z): 1,270 / 660 / 610 mm Table size: 1,500 × 660 mm Table load: approx. 1,300 kg Spindle: SK40, up to 10,000 rpm (depending on version) Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Tool changer: 20 stations Coolant through spindle (IKZ) available Csdpfxoy Exu Re Aa Negt Coolant system: yes Chip conveyor: yes Scope of delivery / Special features Including various spare parts LAN-enabled due to WR Box Chip conveyor included with the machine Inspection under power possible Collection only – loading can be arranged Price net plus VAT Location: 93073 Neutraubling Mobile: +49 160 97215567 If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! Cgjdpey Hqhfefx Aa Nst The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, number of axes: 3, This 3-axis Hurco VMX 24 vertical machining centre was manufactured in 2001. It features X, Y, and Z travels of 610 mm each and a tool holder sk40. If you are looking to get high quality milling capabilities consider the Hurco VMX 24 machine we have for sale. Contact us for more information. • Spindle hours: 6,540 hours • New spindle was fitted in April 2021 • Chip conveyor is located within the working area • The axes were re-measured during the installation of the new spindle and found to be in order Optional • SK 40 holders • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Cgsdox D Hztepfx Aa Nst Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,550 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: Utlimax 4, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Hurco VMX 24t was manufactured in 2007. It features a SK40 tool holder and a spacious 610 x 508 x 610 mm travel in the x, y, and z axes, complemented by a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 24t machine we have for sale. Contact us for more information. Cedpfx Aajx D Ibze Negt • Axes re-measured on 03/23 and found OK; X axis resealed • The axes number 2 and 3 were re-calibrated and found to be in good working order • only the X-axis was resealed. • Spindle hours: 24,550 hours. Additional equipment • Conveyor belt in the work area Optional • SK 40 holders • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Taper Size SK 40