Used Switch for sale (6,176)

Condition: used, Spiral mixer Boku SK 160 Machine cleaned and inspected, ready for immediate use. Suitable for a maximum of 160 kg of dough. Dust cover included. 2 speed settings. Ijdpfx Ajz A Rz Eeiysig 2 timer switches.

Condition: used, Extendable spiral mixer Diosna SP 120 AF Iijdpfxez A R Eke Aiysg Capacity for dough: 120 kg Capacity for flour: 75 kg Bowl volume: 180 l Bowl diameter: 750 mm Bowl height from the floor: 809 mm Timer control with 2 timers Two speed levels Computer control with recipe memory Protective cover with safety switch Clamping lock Friction wheel drive Mobile with locking mechanism Includes 2 bowl trolleys Optional: Bowl trolley with gear drive

Condition: used, Extendable spiral mixer Diosna SPV 120 AD Dough capacity: 120 kg Flour capacity: 75 kg Bowl volume: 180 l Bowl diameter: 750 mm Bowl height from the floor: 809 mm Timer control with 2 timers Two speed settings Protective cover with safety switch Ijdpfx Ajz A Shysiyeig Clamp locking mechanism Gear drive Mobile with locking mechanism Includes 2 bowl trolleys

Condition: used, Extendable spiral mixer Diosna SP 240 AD Ijdpfx Aisz A Sl Sjyoig Dough capacity: 240 kg Flour capacity: 150 kg Bowl volume: 355 l Timer with 2 timers Two speed levels Protective cover with safety switch Clamping lock Friction wheel drive Includes 2 bowl carts

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system Iiedpfx Aezlktpjiysg for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: excellent (used), Control cabinet Manufacturer: ETA Type: EMOX type 1.12 Size: 60x40 cm, height: 190 cm Contents – main components: 12 pieces power supply: Siemens sitop PSU100L Isdpfx Aisywxxgjysig We have several control cabinets in stock, with various equipment or also empty.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco CC120A Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. Iiodpfx Aiexvnwteyog The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: excellent (used), Control cabinet Manufacturer: ETA Type: EMOX type 1,12 Size: 120x40 cm, height: 170 cm Contents – main components: 1 x PLC: Siemens Simatic S7 1500 6 x frequency converters: Siemens Sinamics V20 7 x power supply units: Siemens Sitop PSU100L We have several control cabinets in stock, with different equipment options or also available empty. Iiodpfeyu Rx Esx Aiysg

Condition: used, Siemens SIRIUS motor protection circuit breaker 3RV2031-4PA10 with auxiliary switch 3RV2901-1A Siemens SIRIUS motor protection circuit breaker with mounted auxiliary switch 3RV2901-1A for overload and short-circuit protection of motors. Manufacturer: Siemens Product series: SIRIUS Type: 3RV2031-4PA10 Device type: Motor protection circuit breaker Series: 3RV2 Number of poles: 3-pole Overload release setting range: 28–36 A Short-circuit release: 520 A Release class: CLASS 10 Rated operating voltage: up to 690 V AC Operating temperature: -20 to +60 °C Main circuit connection: Screw connection Iodpfezupbwox Aiyjig Additional component: Auxiliary switch Type of auxiliary switch: Siemens 3RV2901-1A Rated insulation voltage of auxiliary switch: 690 V Rated impulse withstand voltage of auxiliary switch: 6 kV AC-12 at 230 V: 10 A AC-12 at 690 V: 10 A AC-15 at 230 V: 4 A AC-15 at 690 V: 1 A DC-13 at 24 V: 2 A DC-13 at 230 V: 0.25 A Scope of supply: Motor protection circuit breaker 3RV2031-4PA10 with mounted auxiliary switch 3RV2901-1A Available quantity: 2 pieces

Condition: used, mileage: 3,61,233 km, power: 140 kW (190.35 HP), first registration: 08/2019, fuel type: diesel, overall weight: 4,399 kg, next inspection (TÜV): 10/2026, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 30 m³, loading space length: 4,800 mm, loading space width: 2,040 mm, loading space height: 3,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle No. for customer inquiries: 196 ----Special features: * Air conditioning system (Tempmatik) * Speed limiter (cruise control) * Navigation system Becker MAP Pilot * Bi-Xenon headlights with cornering lights * Rear axle suspension: air suspension * Hill start assist * Audio system Audio 15 (radio with color display) * Outside temperature display * 1-pole battery disconnect switch * Roof control unit with reading light (driver/passenger side) * Digital tachograph, downloadable * Generator 180 A * Folding cover for storage compartment * Comfort opening + closing with infrared remote control * Fuel filter with water separator * Fuel tank: main tank 100 liters * Steering wheel (leather) Iodoz Dl Rqjpfx Aiyeig * Steering wheel (adjustable steering column) * Multifunction steering wheel incl. trip computer * Light and rain sensor * Metallic paint * Fog lights * Smoker's package * Interior rearview mirror * Rear wall with window * Front mud flaps * Seat equipment: comfort headrest, driver's seat * Seats in the cab: double passenger seat * Seats in the cab: double passenger seat with folding backrest * Seats in the cab: comfort suspended seat, driver's side heated * Reinforced rear stabilizer bar * Reinforced front stabilizer bar * Rear wall lining * Vlies battery 95 Ah * Heat-insulating glazing (windshield with band filter at the top) ----Standard features: * Adaptive brake light * Airbag driver side * Anti-lock braking system (ABS) * Drive type: rear-wheel drive * Washer fluid level indicator * Exterior mirrors electrically adjustable and heated, both sides * Exterior mirrors with integrated turn signal * Brake assist * Braking system with ABS+ASR * Roof lining in the cab * Electronic stability program (ESP) * Driver assistance system: lane keeping assist * Electric windows 2-way * GTronic automatic transmission - (7-speed) * Lockable glove box * Body/superstructure: standard platform * Headlamp range adjustment * Truck registration * Model update * Engine 3.0 L - 140 kW CDI CAT * Particulate filter * Wheelbase 4325 mm * Low emissions according to emission standard Euro 6 * Power steering * Safety belt system with warning system (driver side) * Seat cover/upholstery: fabric Lima * Seats in the cab: passenger seat with armrest * Seats in the cab: adjustable passenger seat * Seats in the cab: driver's seat with armrest * Service interval display Assyst * Immobilizer * Central locking with remote control * Permissible total weight 5.00 t * Twin tires on 2nd axle / rear axle ----Technical data: * Wheelbase: 4,325 mm * Load compartment dimensions: L: 4,800 mm W: 2,040 mm * Platform max. height: 835 mm * Payload: 2,039 kg * Techn. max. payload: 2,640 kg * Tire size: 195/75 R16C * Tire tread: approx. 30% - 50% ----German vehicle! * 19,900.- Euro net plus VAT * Valid inspection (TÜV) until 10/2026 * A security deposit will be retained for export to third countries or the EU. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description serves only the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information provided

Year of construction: 2006, condition: used, We offer this used Unigraphica Unicut 740 and S-74-3 Unigraphica Unicut 740 cutting machine, manufactured in 2006. Type: S-74-3 Version: S-74-3 Number: 006 Year of manufacture: 2007 Fuse: 16 A Rated current: 5.0 A Power consumption: 3.0 kW Power supply: 3 x 400/230 V 50/60 Hz Formats: 7"-27" Format divisions: 1/6" and 1/8" Paper weight: 60-250 g/m2 Maximum paper width: 740 mm. GUK K72/4 KTL-F4 folding machine Year of manufacture: 1996. Isdsy N Rcbepfx Aiyoig Equipment: 4 standard cassettes (pockets), 1 blanking cassette, 1 electric cassette for performing special folds, cassette stand. The machine is operational but incomplete. Missing the controller and optical sensor for triggering the electric cassette, missing the reciprocating knife section. Modified sheet feed control. The machine can be switched on and tested. If you have any questions or require additional information, please send us a message.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, pressing force: 40 t, stroke length: 200 mm, total length: 1,600 mm, total width: 1,520 mm, total height: 2,450 mm, overall weight: 4,000 kg, Equipment: documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: BYSTRONIC, Type: Xpert 40/1030 Year of manufacture: 2019, unused, originally packaged machine!!! Technical data Manufacturer: BYSTRONIC Type: Xpert 40/1030 Year of manufacture: 2019 Capacity: 40 t Hours: 0 Bending length: 1030 mm Stroke: 200 mm Distance between columns: 1060 mm Iijdpsz A Ex Sefx Aiyog Motor power: 7.5 kW Dimensions: L 1.52 x W 1.60 x H 2.45 m Weight: 4 t Equipment • 6-axis back gauge • Hydraulic clamping, top and bottom • RF-A tool holder, top • Height-adjustable display ByVision Bending with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bending curve generator • Automatic tool overload protection • Rear sliding door with electric monitoring • Ergo foot switch • Tool package All information is without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – Vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine is manufactured by the renowned Swiss company STRIEBIG, recognized as a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is in fully working order and ready for use. It is currently in operation at our company and can be viewed while it is running. Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Ijdpfx Aiezizy Isyoig Frequency: 50 Hz Blade diameter: recommended: 300 mm minimum: 290 mm Blade speed: 4750 rpm Vertically moving cutting carriage Mechanical scoring Original dust extraction system Robust steel construction Precise guides Clamps for panels Clear control panel Safety switch Working area Based on the photos: Cutting length: approximately 5300 mm Cutting height: approximately 2200 mm (Please provide exact dimensions if desired). Technical condition: 100% operational Ready for use without additional investment Regularly used Can be inspected during operation Very accurate and stable Application Ideal for cutting: furniture panels MDF HDF plywood OSB boards laminated boards plastics

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Weiler Primus VC precision center lathe, year of manufacture 2008, 3-axis digital display, Siemens, with AC drive, stepless speed control, CE compliant! Technical data: >> Year of manufacture 2008, machine no. DB-01 Ijdszl T Tropfx Aiyoig >> Center height 140 mm >> Center distance 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display, Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck 160 mm with 5 sets of jaws >> Stop >> Mulifix size A with 4 steel holders >> Electric chip guard >> Machine lamp >> Drill chuck, centering point >> Change gears >> Splash guard About the machine: Offered is a Weiler Primus VC lead screw and draw spindle lathe, year of manufacture 2008, in very good condition. The control system, in combination with a precision center lathe from Weiler, performs the following functions: graphical display of travel paths and direction, graphical representation of the measuring system on the lathe, compensation of tool corrections, zero point adjustment to compensate for the workpiece position, radius/diameter switching, graphical display of the main spindle rotation direction, graphical display of the position of the machine's speed potentiometer. A very nice lathe with AC drive and stepless speed control of the working spindle. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced with a ground finish. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector Isdpfxezza Hko Aiyeig - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Iisdpfjy R U Azsx Aiysg Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Condition: excellent (used), Year of construction: 2014, The set on offer is a TREIF TWISTER AT Cube Cutter combined with a STORM engineering loading lift (Hebe- und Kippvorrichtung), forming a complete, automated dicing station. The set additionally includes knife blocks of 6, 8, and 30 mm, allowing different grades of the finished product to be produced without needing to purchase extra tooling. How does the TREIF TWISTER AT with the STORM lift work? Raw material is placed in a transport container, which is raised and tilted by the STORM lift, emptying its contents directly into the loading chamber of the TWISTER AT cutter. Inside the machine, raw material passes through the cutting assembly, where interchangeable knives (a quick tool-change system requiring no additional instruments) cut it into cubes, strips, or slices, depending on the tooling used and the selected cutting program. Control is handled via a touchscreen panel with stored cutting programs, allowing quick switching between settings when changing products or knife spacing. Key advantages of the TREIF TWISTER AT with STORM set The STORM loading lift eliminates manual lifting and emptying of raw material containers, reducing operator physical strain and speeding up the feeding of successive batches into the cutter. Its IP65 protection rating allows the lift to operate under conditions of frequent station washdown. The included set of additional knife blocks (6, 8, and 30 mm) extends the machine’s capabilities to further cube sizes without needing to purchase separate tooling, which matters for plants with frequently changing product ranges. The solid construction of the TWISTER AT cutter, weighing 950 kg, and its power supply suited to a wide voltage range (380–480 V) ensure stable operation across different electrical installations. Iijdpfxozzp S Ne Aiysg Technical specifications of the TREIF TWISTER AT with STORM set TREIF TWISTER AT Cube Cutter Manufacturer: TREIF Model: TWISTER AT Description: Cube cutter Year of manufacture: 2014 Capacity: up to 3,5t/h Chamber: 120 x 120 x 550 mm Current type: 3-PE, 50/60 Hz Operating voltage: 380–480 V Control voltage: 24 V Rated current: 15–12 A Supply line fuse: 25 A Rated power: 7 kW / 9.52 hp Weight: 950 kg Included additional knives: 6 mm, 8 mm, 30 mm STORM loading lift (Hebe- und Kippvorrichtung) Manufacturer: STORM engineering Year of manufacture: 2020 Power: 0.8 kW Power supply: 400 V, 50 Hz Protection rating: IP65 Weight: 410 kg Compliance: CE, ISO 9001-2015, Made in EU Application of the TREIF TWISTER AT with STORM set The set is used in meat processing plants, vegetable product manufacturers, and cheese processing facilities, wherever precise cube cutting of raw material is required alongside improved logistics for feeding raw material into the machine. The ability to quickly change knife spacing makes the set well suited to plants with a varied range of products.

Condition: used, mileage: 34,260 km, power: 59 kW (80.22 HP), first registration: 07/1964, fuel type: gasoline, color: green, driver cabin: other, gearing type: mechanical, number of seats: 2, Year of construction: 1964, Equipment: all wheel drive, Vehicle location: Bovenden, Ijdpfxovhi Twe Aiyjig Color: green Fabric: gray soft top: green U82 (main series) Start and drive with a brand new engine that has now covered 350 km. The engine must therefore be run in further. The renewed parts include: New engine block, batteries, ignition coil, spark plugs, spark plug wires, distributor cap, hood, windshield wipers, headlight grille, fuses, horn, mirrors, seats, snorkel, engine washer, throttle cable, lights, switch plate, leather protection gearshift, 2x front tires, 5 inner tires, brake shoes front and rear, brake cylinders front and rear, complete exhaust, gearbox rubbers renewed, handbrake rubbers, fuel tank, blind spot blades, special stainless steel lock for battery box, oil, coolant, brake fluid, grease, oil filter, fuel filter and several new loose parts are still available as spare parts. Primed twice and painted twice. The front floor still needs to be painted, then it's just a matter of sticking with it. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Iiedpfxjz A Iars Aiyeg Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net Isdpfx Aijzz Nt Hsyjig

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 1,00,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Iedpfx Aiozhnlzjyoig Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Ijdoy Tqwyopfx Aiyoig Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Several Vega Swing83G1Z5Ex level switches and Vegaflex 62 level sensors for sale. Number of Vega Swing83G1Z5Ex level switches: 32 pcs. (18 pcs. with PN16 DN50 flange / 12 pcs. with 1.5 inch thread / 2 pcs. with 1.0 inch thread) Number of Vegaflex 62 level sensors: 11 units (2 units with PN16 DN50 flange / 9 units with 1.5 inch thread) Iedpsu U D Iqofx Aiyjig Vega Swing83G1Z5Ex: Length: 500 mm Type: S83GZO.ZAK050X Vegaflex 62: Type: FX62.CXXGD1HKMXX The price is 190 Euro per sensor. The price can be negotiated when purchasing several sensors.

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp Iodpfx Aiszl T Hxeyjig >> Spindle stop, drill chuck, center >> Change gears >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system Iijdpfxsy Dg N Te Aiyeg - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.