Used Thickness Guage for sale (8,734)

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife planing cutterhead system TERSA, d=120mm: 4,800 rpm Max. chip removal during jointing according to CE: 8 mm Min./max. thickness setting: 3/310 mm Min. workpiece length: 250 mm Feed speed: continuously variable, 6 - 20 m/min. Motor 380 Volt / 50 Hz: 7.5 kW Sound pressure level according to EN 27960: 86 - 90 dB(A) Standard equipment: Thickness table adjustment via 4 trapezoidal threaded spindles Electromotoric thickness table lift with electronic positioning device (input of the planing height via keyboard with electronic display) Electrical system according to CE with magnetic brake Fsdpew I U Hmsfx Adrepk Protective switch Emergency stop switch Safety switch for cutterhead cover Thickness table extension 600 mm Dust extraction port d=150mm Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine Fsdpfx Adjy D U A Ijrjpk - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Fsdpfjy Eizusx Adrjpk Location: Flörsheim Availability: Immediately

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutter head speed: 5000 rpm Number of knives: 4 Number of rollers in the table: 1 Feed rate: continuously adjustable Electric lifting mechanism Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 1240 mm Fedpfx Aszilrbodrjpk Width: 1090 mm Height: 1210 mm

Condition: used, Heavy-duty thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 0.1 mm increments for precise positioning 4-knife safety planing cutterhead Table with four-point support Main motor 4 kW Fodoy A Nrujpfx Adrepk Feed rate 5, 8, 12.5, 19.5 m/min Steel infeed roller Segmented pressure bar made of solid aluminum Under-table roller Year of manufacture 1997 CE conformity Machine is FUNCTIONAL Available from stock in Lieboch

Condition: used, Technical specifications: Max. planing width: 520 mm Cutterhead diameter: 120 mm Fjdpfx Ajzia E Nsdrjpk Number of knives: 4 Total length of tables: 2965 mm Electric table height adjustment Tilting feed table Safety switch Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2965 mm Width: 1400 mm Height: 1150 mm

Condition: used, Year of construction: 1990, Working width: 630 mm Planing height: 250 mm Planer shaft: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter Feed speed: stepless, approx. 6–18 m/min Infeed roller: steel Outfeed rollers: 2 x steel Fpedpfoyxgansx Adrjk Table rollers: yes, powered Motor power: 5.5 kW Extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1100 kg

Condition: excellent (used), Coater SP 400 Working width 400mm Fpjdjuqnbuepfx Adrjk Working height 250mm Electric lifting and lowering of the worktop 4 knife shaft with traditional knives Planer shaft speed 5000r.p.m Main motor 4kw Suction nozzle fi120 Dimensions of the machine 800 x 1000 x 1080mmH Weight 410kg

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Power rating 380V Planer block motor 4kW 8.3A Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Planing thickness adjustable with hand crank Planing width 510 mm Leitz reversible cutter block with 2 knives 2 table rollers Extraction connection 140 mm Fedpfx Aov Up R Ajdrspk

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Fpsdpfxjh U A Evj Adrek Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: reconditioned (used), functionality: fully functional, Planing width 510 mm, planing height 200 mm, manual height adjustment, star-delta switch, feed controlled by 2-speed foot pedal, main switch, emergency stop. Fodpfx Asx E Smmodrepk

Condition: reconditioned (used), Motor 5 kW electric height adjustment with digital display brake can be released electrically for knife change planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min Fodsy Hkzfopfx Adropk start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Fpedpfemdr A Ejx Adrek Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Fjdey Egmuepfx Adropk Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: as good as new (ex-display), Year of construction: 2022, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Fedpfou Uu U Ujx Adrepk Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A Demonstration Maschine ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw Fpsdpfx Adst Rp Hxsrek 3 feed speeds CE certificate

Condition: ready for operation (used), Faithfull Printing Equipment Digithick TM-353 High-precision Thickness Gauge SN:602262 + Side Table 1040 x 520 x 760 mm, used, normal signs of wear, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and transport! Fpsdpfxex Eq Hrj Adrok

Condition: used, SICAR thickness planer Planing width: 500mm, 4 traditional knives, i.e., wedge-type knives. 2 feed speeds for the thickness planer, Mechanical adjustment of the thickness planer table, Max. planing thickness: 230mm, Length of planer bed: 202cm, with extension to 240cm, Adjustable planer fence, 4KW motor. Fpsdpfszha I Uex Adrok

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Electric thickness table adjustment with fine adjustment Motor power 4 kW Planing width 510 mm Total length of the jointer table 2200 mm Fpsdpfxszhuz As Adrsk 4-knife planing cutterhead Cutterhead speed 4700 rpm Planing height 3 - 230 mm Feed speeds 8 + 14 m/min Weight approx. 750 kg

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Fpjdozd Evvopfx Adrek Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Width: 1100 mm Height: 1400 mm

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68592, functionality: fully functional, type of input current: three-phase, Martin thickness planer in very good, used condition. T41 - Year of manufacture 1968 (?) Strip planing blade, Z4 The thickness planer was purchased from a dealer in 2018. The machine is being sold as part of the liquidation of our carpentry business. Pick-up price - delivery possible upon request. Fpedsziuqtjpfx Adrsk The sale is made with exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: used, Thickness planer Panhans 426 Planing width 630 mm Planing height 250 mm Electric height adjustment via positioning control TERSA safety planing cutterhead Table with four-point guidance Main motor 7.5 kW Feed rate 7 + 14 m/min Articulated pressure beam made of solid aluminum Machine is WORKSHOP TESTED and in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch Fpjdpfx Adsy Tu R Djrek

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,600 rpm, total length of planing tables: 900 mm, overall weight: 690 kg, Equipment: CE marking, documentation/manual, HOUFEK Thicknesser 530 mm | 5.5 kW | 4 Knives | Electric Lift Table | 2017 HOUFEK!! HOUFEK THICKNESSER! Professional wood thicknesser from 2017. Used machine, fully functional, ready to work. Solid construction with a weight of 690 kg ensures stability and high-quality material processing. TECHNICAL SPECIFICATIONS: - Maximum material width: 530 mm - Minimum material length: 320 mm - Working height range: 3–250 mm - Table length: 900 mm - Table width: 550 mm - Main motor power: 5.5 kW (7.5 HP) - Spindle speed: 4600 rpm - Number of knives: 4 pcs (TERSA) - Spindle diameter: 120 mm - Spindle length: 550 mm - Feed motor power: 0.58 / 0.75 kW - Feed speed: 4 / 8 m/min - Dust extraction port: 150 mm - Power supply: 400 V / 50 Hz - Machine dimensions: 1050 × 1000 × 1200 mm - Weight: 690 kg Equipment: Electric table height adjustment Mechanical table position measurement Automatic star/delta switch Segmental roller pressure Serrated feed roller Four-point table support Two feed speeds: 4 and 8 m/min CE certificate The machine is ideal for a carpentry workshop, sawmill, or company involved in the production of furniture and wooden elements. Condition: used, normal wear and tear appropriate for its age. Possible to inspect on-site. It is possible to test the machine on-site. Financing options are available through leasing or installments. The machine has been technically inspected and is ready for further operation. It is possible to start and test the machine on-site, which allows you to assess its condition and operating parameters before purchase. For the convenience of our customers, we offer financing options in the form of leasing or installments. We assist with the formalities and selection of the most advantageous financing option. WE ORGANIZE TRANSPORT Fodszc U Nkepfx Adrepk WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Planing width: 510 mm Motor power: 4.0 kW Motorized table adjustment Fine adjustment via handwheel Fedpfxswx Nilj Adrepk 2 rubber feed rollers

Condition: excellent (used), SCM S630 thickness planer Max. planing width: 630 mm, Max. planing height: 300 mm, Fpedjzgbzyjpfx Adrjk 4 conventional knives, the so-called wedge-type knives, electric lifting mechanism, infinitely variable feed speed adjustment, 2 adjustable rollers in the table, electronic height display, 3 top feed rollers (2 rubber rollers to guide the material), 7.5 kW motor with brake, quiet operation, machine in very good condition.