Used Internal Gauge for sale (9,189)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 5640/5, overall weight: 70 kg, plate length: 400 mm, plate width: 400 mm, No reserve price – guaranteed sale to the highest bidder! Nlsdpfx Aqey D Nm Isvjb Placing a bid obligates you to collect the item in a timely manner between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Plate dimensions: 400 x 400 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 400 x 400 x 400 mm Weight: 70 kg External reference: 26

Condition: used, Year of construction: 2019, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Nsdpfx Aqsy Tm Uzevolb Weight approx.: 20 kg EQUIPMENT Laptop and software (completeness not guaranteed) Transport case Note: The red base on which the laptop sits is not included in the offer.

Condition: good (used), I sell a depth gauge of the well-known company Mahr EX 30 . Very good condition. Nljdpfx Aeu Swkcsqvsb

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required Nlsdpow Rdt Ijfx Aqvsb An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm Nlodpsw Rv Tasfx Aqveb total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t Nlodpfxou Ngybs Aqvsb dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr230440, Control system, manufactured by CINCOM MITSUBISHI Meldas Nljdpfxey Ulh Ne Aqveb 6 axes (X1/Z1/Y1/C1/X2/Z2), Bar Ø max. 16 mm, turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, backworking), parts conveyor belt Chip conveyor Fire extinguishing system loading magazine IEMCA Genius 118/3200 year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Width:800mm Height:1400mm Weight:500kg Nledpfxjy Uvhyo Aqvob Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Fischer FISCHERSCOPE X-RAY XDL 240 Professional X-ray fluorescence measuring device / XRF analysis system Manufacturer: Helmut Fischer GmbH Type: FISCHERSCOPE X-RAY XDL 240 For sale is a professional Fischer X-ray fluorescence measuring system for coating thickness measurement, material analysis, material testing, and quality control. The device comes from commercial use and is offered including PC system, monitor, software, documentation, calibration standards, accessories, and tools, as shown in the pictures. Manufacturer: Helmut Fischer GmbH Made in Germany Type: XDL 240 Serial number: SN150004753 Supply voltage: 115 V Frequency: 50 - 60 Hz Power consumption: 120 W Fully shielded device according to RöV §8 Annex 2 No. 3 Approval number: BfS 11/07 V RöV Fischer WinFTM software available WinFTM XDL 240 Version 6.33 L-PDM PC system with HP computer, monitor, keyboard, and mouse. Original Fischer documentation, certificates, data storage media, USB dongle / license stick and other accessories available. EC Declaration of Conformity available. Certificate for the Full-Protection Instrument available. Calibration and reference standards and other measuring accessories as shown in the pictures are included. Suitable for coating thickness measurement, material analysis, quality control, laboratory applications, and industrial measurement technology. Used measuring system from industrial application. Optical condition, see pictures. Nljdpfxjy Ulale Aqvjb The system starts up, software and user interface are visible. No further technical inspection or calibration has been carried out by us. Inspection and testing on site is possible and desired after prior arrangement. Important note: "The table shown in the photos is not part of the sale." Dimensions and weight: Dimensions: 57.0 x 76.0 x 65.0 cm Internal dimensions: 46.0 x 49.5 cm (maximum sample height depending on configuration) Power supply: Voltage: 100 - 240 V~ (AC) Frequency: 50 - 60 Hz Power consumption: 180 VA (Volt-Ampere) Weight: 120 kg Scope of delivery: FISCHERSCOPE X-RAY XDL 240 HP PC system Monitor Keyboard and mouse Software / data storage media USB dongle Calibration standards Tools Documentation and accessories as shown in the pictures Sale exclusively to commercial businesses. Sale is used, without guarantee, warranty, or return. All information provided to the best of our knowledge according to nameplates, documentation, and clearly identifiable data. Scope of delivery and condition, see pictures. We will be happy to answer any further questions by telephone or message.

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm grinding depth 450 mm swing diameter 660 mm Nlodpfx Aqsyrtwrevsb

Condition: excellent (used), Year of construction: 1985, internal diameter 300 mm grinding depth 450 mm swing diameter 660 mm Nlsdpfx Aqoyrtvzeveb

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231509, A Miyano BNE-51S CNC lathe with IEMCA BOSS 552-HD bar feeder is for sale. Year of manufacture: 1999 Control: FANUC Series 18-T (dual-channel control) Technical Data Nljdpjy T N Dxjfx Aqvob Max. bar diameter: 51 mm Max. turning length: approx. 125 mm Travel paths: * X1 / X2: 150 mm / 115 mm; Z1 / Z2: 380 mm / 125 mm Y-axis: +/- 40 mm (upper turret) Spindles (main & sub spindle): Speed range: 135 – 5,000 rpm (both spindles) Drive power: 11 kW / 15 kW (main spindle) C-axis: 0.001° on both spindles for complete contour machining Tool system (2 x turrets): Turret 1 (upper): 12 stations (all live, including Y-axis) Turret 2 (lower): 12 stations (all live) Live tool speed: max. 3,200 rpm Bar feeder: IEMCA BOSS 552-HD Bar diameter range: 5 mm to 51 mm Bar length: up to 3,200 mm Chip conveyor Batec fire extinguishing system The machine can be inspected under power by prior arrangement. Technical data and specifications are subject to change and prior sale excepted.

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm Nlodpfey Ty Afex Aqveb max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm Njdpfx Aevprxfoqvelb max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-track pallet truck Series. Year of construction 2014 Nledpfx Aehxvuwsqvsb Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Overall height 2160 mm Overall length 1650 mm Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Nledpoupbf Dofx Aqveb Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technische Details Innendurchmesser 800 mm Schleiftiefe 500 mm Umlaufdurchmesser 850 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 6,4 t Raumbedarf ca. m Zusatzinformationen Gebrauchte Innenrundschleifmaschine mit Stirnschleifeinrichtung in Sonderausführung mit vergrößertem Umlaufdurchmesser und erweiterter, hydraulischer Querverschiebung Rekonstruiert und modernisiert 1995 im Herstellerwerk Glauchau, Inbetriebnahme 1996 1. TECHNISCHE DATEN 1.1 Arbeitsbereich Schleifdurchmesser im Werkstückschutz Innenschleifen, min./max. 30/630(800) mm Außenschleifen, max. 800 mm Schleiftiefe, bis etwa 500 mm Tischhub 800 mm Werkstückdurchmesser, max. 800 mm Umlaufdurchmesser im Werkstückschutz, max. 800 mm ohne Werkstückschutz, etwa 850 mm Abstand vom Werkstückspindelkopf bis Schleifspindelträger, max. 1225 mm Verstellung der Innenschleifeinrichtung auf dem Tisch, max. 545 mm 1.2 Werkstückspindelstock Querverschiebung, max. 650 mm Querverstellung über Getriebemotor und Positioniereinrichtung mit HEIDENHAIN Digital-Positionsanzeige Schwenkung, max. 15 Grad Nlsdpfjy Tlngex Aqveb Werkstückspindel Drehzahlen 16/22/32/45/63/90/125/18/250 U/min Belastbarkeit, max 1000 Spindelkopf (mit Bajonettflansch) DIN 55021 Größe 11 Ausstattung und Zubehör: 2-Achsen Digitalanzeigen Fabrikat HEIDENHAIN Kühlmittelanlage mit Magnetabscheider Fixatoren (Maschinenschuhe) Diverse Schleifscheiben Diamantabrichter Große Planscheibe Innen und Planschleifeinrichtung Halogen Maschinenlampe Maschinendokumentation

Condition: used, for planer heads max. 125 x 180 x 35 mm. Njdpfx Aelf Nddoqvelb

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Nedox A Ia Ispfx Aqvjlb

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Nsdpfx Aqsw R E Hvsvslb

Condition: used, Year of construction: 2004, operating hours: 1,53,199 h, machine/vehicle number: IntNr231566, For sale is a high-performance DMG Speed 12-7 Linear sliding headstock automatic lathe with FMB Minimag bar feeder. Control: Fanuc 16i-TB with DMG-specific operator interface Year of manufacture: 2004 Technical data Number of axes: 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) Maximum bar diameter: 12.7 mm Maximum turning length: 120 mm Rapid traverse rates: X-axis (linear): 40 m/min Linear drive cooling: Separate cooling unit for thermal stabilization of the linear motor. Z-axis: 30 m/min Main spindle speed range: 0 – 12,000 rpm Drive power: 3.7 / 5.5 kW C-axis: 0.001° resolution for high-precision milling operations Counter spindle speed range: 0 – 12,000 rpm Travel (Z2): 150 mm Nsdjy Sak Hepfx Aqvslb C-axis: full-featured integrated C-axis Tool carrier (linear slide system) Total tool positions: up to 18 stations Driven tools: 3 to 5 positions for cross machining Max. speed of driven tools: 6,000 rpm Bar feeder: FMB Minimag for bar diameters from 2 to 23 mm. Bar length: 3,020 mm Chip conveyor Compact extinguishing system / Kraft und Bauer automatic fire suppression systems Parts separator Chip flushing system The machine can be demonstrated under power by prior appointment. Technical data and details are subject to change and error. Prior sale reserved!

Condition: good (used), Year of construction: 1986, grinding depth: 315 mm, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Nlsdjy Ukakspfx Aqveb Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: used, Year of construction: 2004, operating hours: 1,45,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Nlodpfsy Ehdbex Aqvob Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Nledpfoy N Tqbjx Aqveb Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231168, STAR CNC sliding headstock automatic lathe SB 16C, year 2007 CNC control: FANUC 18i-TB Technical specifications - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Z-axis travel: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: Nlsdpfjy Rfvfox Aqvjb SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm - Minimum C-axis resolution: - Number of tool positions: 8 - Number of driven positions: 3 Bar feeder: FMB Minimag /3200 /A Bar diameter: 2–16 mm Bar length: 3,200 mm HERA compact fire extinguishing system – Fire protection Operating manual included The machine can be inspected under power by prior arrangement. Subject to prior sale. Technical specifications and data are subject to change and errors.