Used Tomcat Cleaning for sale (6,017)

Condition: used, Year of construction: 2019, Working condition and in standard configuration! Location within EU. Ask for additional details! Rcodpfxsxlzwxs Aabeh

Condition: new, Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 231025, total width: 700 mm, total length: 1,000 mm, total height: 1,000 mm, heating capacity: 12 kW (16.32 HP), tank capacity: 160 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 400 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, input voltage: 220 V, input frequency: 50 Hz, Equipment: CE marking, High-Power Ultrasonic Cleaning Machine Special operator safety features Rodpfx Aexpv D Ueabjch Usable internal dimensions: 800 x 500 x 400 mm (H) Useful capacity: 160 liters Ultrasonic power: 3000 W Ultrasonic frequency: 33 kHz PZT elements: 36 units Heating: 8 kW (4+4) Voltage: 220 V, single-phase, 50 Hz Absorption: 8 A Stainless steel basket included: 700 x 300 x 280 mm (H) Basket load capacity: 10 kg Total soundproofing Full insulation with volcanic rock wool

Year of construction: 2006, condition: good (used), Basket diameter: 1200 mm Basket height: 500 mm Basket load capacity: 500 kg Manufacturer: Perkute Rcodpfx Aaepy Dw Rjbeh Tip: Clean-o-mat SP 120

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For clean components in continuous operation Continuous-flow cleaning system made of stainless steel, equipped with an oil separator for uninterrupted material throughput. The workpieces are conveyed continuously—or in a clocked manner, if required—through successive treatment zones. Cleaning is performed as the parts pass through fixed nozzle systems. Suitable for parts with dimensions approx. 400 x 100 mm A wire link chain conveyor transports the components through the cleaning system, either lying flat or standing. • Surrounding nozzle frame – the offset nozzle arrangement enables thorough, all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle frames and nozzles can be adapted to suit the parts • Usable dimensions, load capacities, and pump performance can be customized The process steps are carried out in successive treatment zones: • Spray cleaning with sequential wet-treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volumes: Washing tank: 800 liters Rinsing tank: 500 liters Rjdsxcun Espfx Aabsch Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Pump, washing tank: 3.0 kW Pump, rinsing tank: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip pans for spill protection. These are included in the price and will be supplied with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: used, Year of construction: 2009, working width 1150 mm working area: 5700 m²/Std. total power requirement 3,0 kW Rodjxpxrnepfx Aaboch weight of the machine ca. 0,5 t dimensions of the machine ca. 1,6 x 1,2 x 1,6 m Sweeper with charger

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Power: 1,1kW Rjdocx R D Hspfx Aaboch Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: used, Year of construction: 2020, sweeping width 942 mm working width Bodendüse: 700 mm tank Reinigung: 79 l tank Schmutzwasser: 83 l weight of the machine ca. 145 kg dimensions of the machine ca. 1,32 x 0,7 x 1,1 m - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level Rcedpfxsgvqzge Aabeh and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 171025, total width: 700 mm, total length: 1,300 mm, total height: 1,000 mm, maximum load weight: 12 kg, heating capacity: 12 kW (16.32 HP), tank capacity: 200 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 1,000 mm, inner dimension width: 500 mm, input voltage: 220 V, input frequency: 50 Hz, Equipment: CE marking, Special high-power ultrasonic washing machine Special operator safety features Redpexpu Ncsfx Aabsch Usable internal dimensions: 1,000 x 500 x 400 mm (H) Supplied stainless steel basket: 900 x 400 x 300 mm (H) Ultrasonic power: 3,600 W Ultrasonic frequency: 33 kHz PZT elements: 48 Heating: 12 kW (8+2) Voltage: 220 V single-phase, 50 Hz Current draw: 8 A Basket load capacity: 12 kg Total noise insulation Entirely in stainless steel Double wall for heating insulation Tank thickness: 2 mm (20/10)

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Rcedpfxjwrpwio Aaboh Currently is working.

Condition: new, Year of construction: 2025, warranty duration: 12 months, water tank capacity: 300 l, type of input current: three-phase, total width: 2,360 mm, total length: 970 mm, total height: 2,030 mm, input frequency: 50 Hz, DPF Filter Regeneration Machine - MOTSLER SLR Premium The MOTSLER SLR Premium is a high-quality, reliable, economical, and very user-friendly machine designed for the professional cleaning of DPF, FAP, GPF, SCR, DOC, EURO6 filters, as well as catalytic converters. It supports all filter sizes—from passenger cars, vans, trucks, to construction machinery and equipment. The unit is entirely made of stainless steel and built using high-quality components sourced from leading Polish and European manufacturers such as Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, and Hager. The SLR Premium machine carries out the complete DPF cleaning process, which includes: initial measurement, cleaning, drying, final measurement, and concludes with a printed DPF cleaning report. Technical Specifications: - Device dimensions (L/W/H) [mm]: 2360 x 975 x 2031 - Chamber dimensions (L/W/H) [mm]: 1600 x 830 x 1090 - Machine construction: 304 stainless steel - Weight: 550 kg - Power supply: 3 x 400V 50 Hz - Max. power: 11 kW - Optimal power consumption: 6.9 kW - Circuit protection: 20 A - Tank capacity: 300 liters - Pump performance: 250 L/min Rcjdpjtrmriofx Aabeh - Hose diameter: 1.5” DN 40 - Water drain: 2” DN 50 - Drying temperature: 100 – 120°C - Water temperature: 10 – 50°C - Max. air flow (drying): 325 m3/h - Air pressure (drying): 300 mbar - Drying and cleaning: bidirectional manual - Contamination measurement: on dry and wet DPF filter - Filtration: 250 – 1 micron - Pre-filtration: 2 pre-filters - Filter replacement frequency: approx. every 40–100 cycles - Noise level: 70 dB - Min. ambient temperature: 3°C - Declarations of conformity: EC, CE Equipment: - Single-pipe SWS system - Professional PFS filtration system (cartridge replacement every 40–100 DPF filters) - 7” touchscreen display - Thermal printer for cleaning reports - Caster wheels - Adjustable leveling feet - Tempered glass windows - 2 cleaning hoses - 17 adapters for connecting DPF filters - 8 rubber seals for adapters - 4 DPF filter retainers - 4 adapter clamps - Inspection camera - Foam neutralizer - 2 pre-filters - Main filter cartridge - DPF CleanX cleaning fluid Equipment / Adapters: - All adapters for passenger cars and trucks - Set of rubber seals for adapters - DPF filter locks to prevent movement WHAT DISTINGUISHES THE SLR PREMIUM MACHINE? Build Quality: - Constructed entirely from stainless steel with components from leading European manufacturers: Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, ensuring top-tier precision. Single-Pipe SWS System: - All processes are conducted through one hose, eliminating the need to stop the machine, open doors, or reconnect the DPF filter between cleaning, drying, and measurement hoses. PFS Filtration System: - Multi-stage filtration system featuring two reusable stainless steel pre-filters and a main filter with a 4.8 m² area, supporting from 40 to 100 DPF filters per cycle. Side Ventilation: - Enables operation in low-ceiling spaces. Steam does not condense on the machine’s top, avoiding water ingress into electronics, electrical short circuits, or machine damage.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 - technically efficient, ready to work – after full service Rjdpfjxgqvtsx Aaboch - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Condition: ready for operation (used), Freelift = kan in een zeecontainer rijden Dieselmotor Sideshift Triplex mast Kind off: Forklift Rcjdsxgv Nljpfx Aabsh Number of axles: 2 Loading capacity: 2500 kg Max arrow height: 4290 mm

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h Rsdpfx Aaog Ti Ihobech max. 5232 m²/h Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

Year of construction: 2024, condition: excellent (used), functionality: fully functional, laser power: 200 W, laser wavelength: 1,064 nm, machine/vehicle number: 202404170, laser type: fiber laser, laser source manufacturer: JPT, 200 w pulsed laser cleaning machine. DMK CL-2-H-200. Made by Demark. China. Rcjdoxbh U Aepfx Aabjh Air cooled. Portable. Only 24kg. Laser handheld head weighs only 1.3 kg. Extended fibre cable to 7m. Single phase 220v. Comes with extras 1x field mirror F254 50x protective lenses. 1xpowerful metal fan to redirect fumes 1xair compressor. It connects onto machine to create air flow cushion to protect optics inside cleaning head. 3x pairs of protective eye wear. Great for rust and oxidation removing in hard to reach places where media blasting can not reach . I used it only on a few jobs for a couple of months. Not viable to keep it any longer as I live in the rural areas where demand for such tech is low. Businesses center are too far.

Year of construction: 2003, condition: used, Technical details: rated capacity: 175 kVA revolution per minute: 1500 U/min connection voltage: 400 V Rcodpfx Asu Nvb Ijabjh dimensions L x W x H: Container: 3,0 x 2,6 x 2,6 m Gas purification plant incl. container Application: For purification of sewage gases from organic silicon compounds and hydrogen sulfide. Gas pressure boosting plant make Muche GmbH Scope of delivery ivated carbon filter Cooling Danvoss; air consumption 2.800 m³/h; refrigerant R 134a Heat exchanger Renzmann&Grünwald Condenser ID Compressor MTZ22-4VI control cabinet incl. documentation, for sale as is. *

Condition: used, Chip suction filter, with automatic filter cleaning (backwashing with blowers and Macair panel) with 1 bag. Rcsdpfjtxdpxex Aabjh

Condition: used, Year of construction: 2018, operating hours: 648 h, functionality: fully functional, machine/vehicle number: HR12952, fuel type: diesel, empty load weight: 922 kg, total length: 2,000 mm, construction height: 1,400 mm, drive type: Diesel, construction width: 1,260 mm, Sweeping suction machine Rcedpoxnt Tkefx Aabsh Chassis number: HR12952 Condition: Ready for use and fully functional Technical condition: normal Description: Equipment: Front lighting, rubber bumper kit, sweeping roller PPL/wire, side brushes PPL/wire mix, power steering. Machine fully workshop-tested, cleaned, with new UVV inspection and maintenance completed.

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, mast type: standard, Sweeper suction machine Mast type: Standard Rjdpfx Ajukrcpjabech Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear tire: 1 x bandage tire; Power steering; Front windshield; 2 x work lights / StVZO-like; Overall height: 2300 mm

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 022607, Lavatubi La Chatre mod. 50 Year 2002 Operational Rsdpexmgy Ijfx Aabsch

Condition: used, Year of construction: 2017, operating hours: 89 h, functionality: fully functional, machine/vehicle number: U02424, fuel type: electric, construction height: 1,100 mm, drive type: Elektro, sweeping width: 900 mm, Vacuum sweeper VIN: U02424 Technical condition: very good Battery voltage: 36V Redpewlwfhofx Aaboch Battery Ah: 210Ah Battery type: Gel Battery year of manufacture: 2025 Battery condition: New Description: Tennant 6100 No.: R0570 Year of manufacture: 2017 Operating hours: 89 Easy to use 970 mm working width 560 mm main brush length 970 mm working width Maintenance-free battery 36 V / 210 Ah External charger 90 kg debris hopper Easy to empty Battery runtime up to 3.4 hours Weight including battery: 503 kg Up to 3,270 m² area performance per hour Multi-stage filter system The machine is in very good visual and technical condition. Fast and uncomplicated transport is possible upon request! The advertisement is for identification purposes only. A detailed description of the condition and possible equipment is available upon request! Errors and prior sale excepted. Sale to commercial customers only. All sales of used goods are made without warranty or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, Year of construction: 2009, Technical details: basket dimensions: 1160 x 600 x 500 mm heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Rcjdpsu Nu Iyofx Aabsh Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: used, Year of construction: 2020, operating hours: 9,262 h, CE mark: yes Serial number: 31xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20531 Specifications: - 2020 model - 9262 hours - Certified to: 09/25 - 284 kW - 53050 kg - Track width: 60 cm - Machine width: 349 cm - 2 cam track shoes - Full track guides - Hammerglass - Serviced by owner - Undercarriage - Cleaning bucket - ​​S90 attachment - Extra hydraulics - Central lubrication - Lights - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2020Volvo EC480 E excavator w/ cleaning bucket for sale. The machine is in weekly operation so the number of hours may increase. It is also certified. The owner has serviced it continuously and the machine is working as it should according to the owner. Ready for delivery Rjdpfx Aswphwisabech Hours: 9262 Own weight: 53050 Total Weight: 53050 Year controlled: Yes Year controlled until: 09/25 Width: 349 Kw: 284 CE: Yes Model: EC480E

Condition: used, functionality: fully functional, Kolb RB5D Stencil Cleaning System Operating hours: 1,781 h Screen stencil dimensions: max. 750 x 585 mm Power: 1.7 kW, Connection: 230 V Cleaning chamber capacity: 75 liters Dimensions: 185 cm x 100 cm Weight: approx. 240 kg Shipping is possible upon request. Redpfx Asqn U Hgjabjch The machine is fully functional and ready for use. Please see the photos for the visual condition and other details. The key for the emergency stop switch is no longer available. With option: stainless steel aluminum operating platform With option: wash cycle counter and operating hours display #7891

Condition: used, Year of construction: 2014, operating hours: 8,498 h, functionality: fully functional, mast type: standard, Sweeper-scrubber Mast type: Standard Technical condition: normal Transmission: Hydrostatic; Tires: 2 x drive wheels bandage power steering Overall height: 2300 mm Rsdpfx Aajukrciobjch

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeping and suction machine Condition: New device Technical condition: New Rjdpfx Ajxmb Sloaboch Battery voltage: 24V Battery type: Lithium-ion Battery year: 2024 Battery condition: 80 - 100% Description: New device with 12-month warranty