Used Tool Lifters for sale (37,721)

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Nlodpfjc Umftjx Ahnjf Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg Nlodpfxjfkv Sfj Ahnsf

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo Nlodpfx Ahjfdkgyenjf -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Nlodpsffm D Tsfx Ahnsf -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Condition: used, Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder Nsdpfx Ahsfl Acionslf -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake Nedsfcd Iljpfx Ahnelf -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg Nledpfxsfckfhj Ahnof

Condition: used, 2 x radial tool holders VDI 40, each: 400 Euro net. Nlsdpfxetz U Iis Ahnef 2 x axial tool holder VDI 40, each: 250 Euro net.

Condition: used, Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm Njdpfx Ajb Uhq Tshnolf -Weight: 25.2 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool Nlsdpfxob A Tabo Ahnof -Socket: Ø 58 mm -Weight: 9 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool radius: mm Nledpocn Rdwofx Ahnsf -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Condition: used, Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 Nlsdpfxedkx Tbo Ahnjf - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Groove: 25 x 4 mm -Bridge: 6 mm -Thickness: 26 mm -Total height: 215 mm -Tool lengths: 430, 240, 76 mm -Round iron: Ø 20 mm Nedpfx Ahednffwonelf -Weight: 24 kg

Condition: excellent (used), For sale: professional EXpressO vacuum lifter, German-made. This device is designed for lifting and transporting flat items using vacuum technology. Model features increased lifting capacity up to 70 kg, equipped with PIAB components and four large suction cups ensuring stable and secure handling. Ideal for working with glass, sheet metal, panels, and other flat elements in industrial settings and warehouses. Technical specifications: Manufacturer: EXpressO Deutschland GmbH Type: Vacuum lifter Nsdpoyvfchofx Ahnelf Maximum lifting capacity: 70 kg Year of manufacture: 2012 Serial number: 2012 003 Model number: 060BLV1502162 Vacuum system: PIAB Number of suction cups: 4 Vacuum gauge Pneumatic connections Condition: Device in very good technical condition Fully operational both visually and mechanically Normal signs of use Complete as shown in the photos Applications: glass and window transportation sheet metal and panel handling production lines warehouses and logistics Included in the set: complete vacuum lifter control handle air installation Shipping: Courier delivery available.

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Nlsdpfx Ahjw Rr A Dsnef

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Nledpfx Ajxl E Nfjhnsf Height: 120 mm Key features: Electro-hydraulic drive Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 12 pieces Nledpfxsgwdpmj Ahnjf -Prisms: 25 ° x 10 mm -Drawing: in the photos -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool Nedpfx Ajgwdp Hshnslf -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H77 mm / 150/77 / H160 mm -Weight: 6.9 kg / 11.2 kg

Condition: used, vacuum lifter units, Nljdsy E Twtspfx Ahnof Manufacturer: Fezer Type: RC 0010 B 5Z1 Vacuum: 20 mbar Overall dimensions: 720 x 600 x 570 mm Weigth: ~30 kg This includes a flash pad : 4 pieces Max lifting capacity: 65 kg/ pc /pad

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg Nlodpfx Ahszip Hisnsf total power requirement 14 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition. Accessories, CE compliant. Technical data: >> Year of manufacture 1992, machine no. 2102-7007 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable on spindle head by 100 mm Nsdpfx Ahozl Ebbonelf >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, counter holder About the machine: Offered is a Deckel FP1 universal milling machine in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine with a plug. This makes it easier to transport the machine. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically move to. The FP1 was used in a training workshop, where it was only used occasionally. An oil change was performed. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Consisting of: Nlodpfx Ahjzl Sh Usnof Drawer cabinet PT01 Width: 1120 mm x Height: 1550 mm x Depth: 724 mm (12 x SL 100 mm, 1 x SL 150 mm) 12/16/20/24 individual compartments per drawer Drawer cabinet PT02 Width: 800 mm x Height: 1000 mm x Depth: 724 mm (4 x SL 125 mm, 4 x SL 100 mm) 12/16 individual compartments per drawer Both drawer cabinets have: 1. Drawer locking mechanism 2. Individual compartment locking mechanism

Condition: good (used), functionality: fully functional, total width: 622 mm, total length: 622 mm, total height: 600 mm, Equipment: documentation/manual, Tool presetting device Nlodozqbcxjpfx Ahnof Carl Zeiss Jena WDO 160 x 315 Coordinate measuring machine with horizontal measuring plane Microscope with 30x magnification Dimensions: 622 x 622 x 600 mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, total width: 550 mm, total length: 460 mm, total height: 490 mm, input voltage: 230 V, grinding wheel diameter: 100 mm, overall weight: 51 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.375 kW (0.51 HP), spindle speed (max.): 5,300 rpm, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Nedpfsq E Ry Hjx Ahnslf Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Condition: used, - Angular head with 4 different quick-change inserts Nedewxw R Dopfx Ahnslf - one SK 50 collet - Mounting wrench for mounting the tools - SK50 collet according to DIN 69871 Includes test report.