Used Column lifter for sale (3,920)

Column rotating crane with vacuum lifter

Call

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Load capacity: 250 kg on the lifting device Load capacity = specified payload on the hoist, the dead weight of the hoist is already taken into taken into account. The column-mounted slewing jib crane consists of column with base plate incl. adhesive anchor, smooth-running jib, Sliding trolley, main crane switch, energy supply system, fastening and connecting parts. The static check of the floor has to be done by the customer and has to be documented accordingly! Dmabk7 Painting: Fire red RAL 3000 (other colors on request) Fastening: The prerequisite for fastening with heavy-duty anchors is an appropriately proven concrete floor. Concrete floor: C20/25, min. 20 cm Movement: swiveling and trolley movement by hand Overall height: approx. 3.8 m Lower edge of boom: 3 m outreach: 5 m Slewing range: approx. 250 Base plate: 800 mm x 800 mm Vacuum lifter uniWood B3 90°-250 with integrated chain hoist lifting capacity: 250 kg Description: Suitable for vertical and horizontal transport of flat commercially available boards (coated boards and natural wood boards). Version with pneumatic tilting mechanism for a tilting range of 90°. The vacuum is generated pneumatically by means of an ejector. For lifting permeable materials (MDF over 8mm thick) the reinforced vacuum pump is installed. In principle, the boards must be suitable for transport with vacuum cups. An eyelet is provided on the chain hoist for hooking into the customer's trolley. Technical data: Lifting speed chain hoist: 0-10 m/min infinitely variable by means of frequency converter Lifting height (operating range): 2,0 m length of the chain: 3,5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Compressed air consumption: 11 Nl/sec Own weight:approx. 85 kg Safety system: The lifter is equipped with a vacuum manometer. Release of the load by means of 2-button function. Operation by comfort control: The comfort control enables by means of frequency converter the stepless lifting and lowering of the plates. All operating elements for the lifting unit and for the vacuum lifter are integrated in one control unit on our special handle, which is also attached to an outrigger. which is attached to an extension arm. This makes it possible to operate the system and guide the loads in one hand operation is possible. Vacuum traverse - reinforced version: 1 pc. longitudinal traverse (1,25 m) and 2 adjustable oval suction plates 500 mm x 250 mm. Incl. preliminary freight ex works Location: Hochheim Availability: By arrangement

more

Listing

Oirschot

(dealership location)

7,116 km

column lifter

Storm Column lifter 31.0423.52

Call

Condition: excellent (used), Year of construction: 2012, Type: Column lifter 31.0423.52 Model: C Dl7blb Serial number: 3117312 Year of construction: 2012 Tilting height: 1700 - 2200 mm Container: 1200 x 1100 x 850 mm Load: max 450 kg Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1400 x 2100 x 3400 mm Weight: 800 kg

more

Listing

COMEGE, Verlinde PFI, Verlinde VR12 1604 b2F

Nagytarcsa

6,083 km

COMEGE, Verlinde PFI, Verlinde VR12 1604 b2F

€18,950

Wide track high lift truck, walkie stacker, pedestrian stacker

Call

Condition: excellent (used), Year of construction: 2017, Load capacity: 1600Kg Slewing crane version: crane with electric chain Verlinde hoist and motorized movement chassis Track length: 3500mm Track width: 3900mm Track height: 3500mm Crane girder length: 6000mm Upper hook position: 2000mm Lifting height: 3000mm Height of the lower edge of the crane arm: 2800mm Operating voltage: 400 V Lifting motor: 1.8kW Control: pendant switch Control voltage: 48V Fine lifting: 1.1 m/min Dl3ot9 Normal lift: 4.5 m/min Rotation range: 360° Vacuum lifter: Production: Best Of Type: BGLA-10F Load capacity: 1,600 kg Number of suction discs: 10 pcs.: diameter: 300 mm Price separately: Crane: 15450 EUR Vacuum lifter: 3500 EUR

more

Listing

Hessisch Lichtenau

6,811 km

HANSELIFTER - Hanse-Lifter E-SDJ1016-01

€2,000

VS-21112 BJ2017 Elektrische stapelaar 2.900mm

Call

Condition: used, Year of construction: 2014, Wide-gauge high-lift truck, walkie stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter type E-SDJ1016-01 Wide track pallet truck Series. 052963-001 Year of construction 2014 Nominal lifting capacity pedestrian stacker 1000 kg load capacity special construction device GIESLER 200 kg Nominal lifting height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic power unit 12 Volt Overall height 2160 mm Total length 1650 mm total width 1860 / 1200 mm - manual drive mode - electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between wheel arms) Iphzvxgys - 1 piece battery 12 volt - separate charger 12 Volt, 15 Ampere - Fork base beam on the lift mast made of steel - Fork carriage special construction device GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Forks made of stainless steel, complete length 770 mm to swivel plate - Forks cannot be lowered to ground level due to special construction device (approx. 170 to 250 mm depending on track width) dead weight 485 kg as good as new condition

more

Listing

Oss

(dealership location)

7,100 km

Lifter GX12/29

€2,799

ONO VAT not applicable

Call

Condition: used, Year of construction: 2017, Operating hours: 4,018 h, - Deze Elektrische stapelaar van het merk LIFTER GX uit 2017 is in goede staat - De capaciteit is 1.200 kg - De stapelaar heft tot een hoogte van 2.900 mm - Doorrijdhoogte 1.980 mm - De batterij zijn NIEUW (2 x 12 volt) en voorzien van een INTERNE lader - Maak een afspraak voor een proefrit. - Bestel de stapelaar in onze webshop!&nbsp - Bekijk de YouTube video online! Sebxl FINANCIAL&nbsp LEASE MOGELIJK,&nbsp 36 MAANDEN &euro &nbsp 92,- PER MAAND Calculatie is&nbsp onder voorbehoud van kredietacceptatie en rente- en tariefwijzigingen , definitieve berekening via onze externe partner*

more

Listing

Helmut Knorr L-450-1-W Pile Lifter Helmut Knorr L-450-1-W Pile Lifter

Sofia

5,698 km

Helmut Knorr L-450-1-W Pile Lifter

Helmut Knorr L-450-1-W Pile Lifter Helmut Knorr L-450-1-W Pile Lifter

€2,500

FTF Driverless transport vehicle

Call

Condition: excellent (used), Year of construction: 1999, Helmut Knorr L-450-1-W Pile Lifter Stacking lift with automatic lift system max size 50 x70 cm Czdigoetx In very good condition

more

Listing

Wiesbaden

6,914 km

Pallet lift truck

BT QUICK LIFTER

Call

Condition: excellent (used), Load capacity approx.: 2 t Fork length: 770 mm Fork gap: 105 mm Bdymzssl9a Fork width outside: 400 mm Total length: 1100 mm

more

Listing

Paleti Lifter S-Elektronik Logistic-Jet FTF

Kreis Bergstraße, Deutschland

6,882 km

Paleti Lifter S-Elektronik Logistic-Jet FTF

€750

LIFTER - scissor lift truck

Call

Condition: not inspected (used), Year of construction: 2012, No. 5130: 1 used electric pallet truck / Driverless transport vehicle FTF make S-Elektronik / LogisticJet / PRAMAC Lifter Crlewg28 type Paleti / FTF year of construction 2013 lifting capacity 650 kg Dimensions: 2916 x 800 x 1220 mm, Own weight approx. 250 kg

more

Listing

Stormhallsvägen 10, 432 32 Varberg, Sweden

6,704 km

pallet lifter

BT Lifter BISU 800 H

Call

Condition: like new (used), Year of construction: 1983, BT pallet lifter, max. lift 800 kg to up to 600mm. In good condition. Myd9sk Can ship worldwide.

more

Listing

Mühlacker

6,866 km

LIFTER Pramac HX 10E 540

€1,400

Call

Condition: like new (used), Year of construction: 2019, LIFTER scissor lift truck Pramac type HX 10E 540 Technical data Battery capacity [V/Ah]12/60 Ground clearance [mm]21 Colorpramac green Outer fork distance [mm]540 Fork width [mm]540 Fork length [mm]1150 Total width [mm]540 Total height [mm]1300 Bcprcgvjstg Total length [mm]1690 Weight [kg]237 Lift driveelectrohydraulic Stroke range [mm]85 - 800 Lifting speed with load [mm/s]80 Lifting speed without load [mm/s]130 Load center distance600 Lift motor power [kW]1.6 Material pallet trucksteel Material roller rubber, polyurethane (PU) Roller diameter [mm]80/200 Load capacity [kg]1000 Turning radius [mm]1541 Machine is sold without warranty.

more

Listing

Berlin

(dealership location)

6,574 km

Scissors Lift Truck

Lifter Pramac HX 10E

Call

Condition: ready for operation (used), Year of construction: 2019, There are three identical scissors lift trucks available, the machine were hardly used. Bgblzqne

more

Listing

Muuga

6,055 km

Column and boom

PEMA Column & Boom HD 4x4 Twin SAW

€2,50,000

Call

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: Serial no 242401, PEMA HD is a heavy-duty column and boom series for demanding welding automation purposes. The series is ideal especially for tandem SAW welding in complete hard automation cells, but suits well also for single wire and twin SAW as well as TIG and MIG/MAG welding processes. With a roller bed and positioner interface as a standard feature, it’s especially suitable for tandem SAW welding with complete hard automation cells and welding lines of heavy tubular parts such as wind tower parts and foundations, but also serves well in single wire and twin SAW process. HD series can be used together with our advanced WeldControl 500 -control system, enabling a high level of automation in multilayer welding. Main Features: Column, boom and rail movements are motorized C9ylpxy Welding of longitudinal and circumferential seams Easy to integrate with PEMA rollerbeds and positioners Technical Specifications: Vertical reach: 1 150 – 5 150 mm Boom reach: 1 250 – 5 250 mm Column rotation: motorized

more

Listing

China

2,987 km

CNC Travelling column milling machine

KRAFT VM-3225 | VM-4225 | VM-5225

Call

Condition: new, :VM-3225 | VM-4225 | VM-5225 x-travel:3200|4200|5100 mm y-travel:3000/3400 mm z-travel:800/1000 mm distance spindle nose and table:235~1235 mm distance between columns:2550/3050 mm table-size:3350x2200|4350x2200|5350x2200 mm table load:15|18|21 t T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000, 15000) 1/min spindle drive:22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:15/18/10~15|12/18/10~15|12/18/10~15 m/min feeds:1~8000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,025|0,030|0,040 mm repeating accuracy:0,02|0,025|0,030 mm total power requirement:60 kva machine length:10125|12035|14035 mm machine width/height:6840x4515 mm Weight approx.:40|45|50 t automatic tool changer:32 fach CNC controller:Siemens/Fanuc/Heidenhain chip conveyor with chip bucket:2 Stück Cqzevtcc CNC controls from:Siemens/Fanuc/Heidenhain linear scales:HEIDENHAIN/FAGOR CTS:20/30/40 bar different kind of milling heads:s. Anlage Neo tool measuring system:RENISHAW ATC:60/90/120 workpiece measurement system:RENISHAW

more

Listing

Brașov

5,573 km

ANAYAK HVM 5000

Call

Condition: used, Year of construction: 2005, CNC Travelling column milling machine - ANAYAK HVM 5000. Travels on axes X - Y - Z: 4300x1200x1500mm; Table size: 5000mm x 1200mm; Table load: 6,000 kgs; Spindle Motor: 30kW; ISO50 Spindle Taper. Bhm9gqh9 The machine is ready for delivery.

more

Listing

Wien

6,310 km

Single Column Press - Hydraulic

AWEA - CNC LP 3016 YF

Call

Condition: used, Year of construction: 2011, x-travel 3000 mm y-travel 1600 mm z-travel 760 mm Control Fanuc 18i MB column daylight 1700 mm table surface area 3260x1500 mm passage 1000 mm table load 10 t O8e78xho drive of main spindle 22 kW spindle turning speed - stepless 10-6000 U/min tool taper ISO 50 rapid travel 20.000 mm/min rapid traverse Z-axis 10.000 m/min toolpiece magazine: chain magazine 32 Stück diameter of tools max. 127/215 mm Power connection 60 kVA total power requirement kW weight of the machine ca. 27 t dimensions of the machine ca. 9x4,7x4 m

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

SICMI MCL 85

€89,700

EXW ONO plus VAT

Call

Condition: new, neu ca. 4 Monate ab Auftragse Italien 89700 1802.97 85 to 500 mm 700x400 mm 800x600 mm 600 mm 300 mm 105 mm/s 41 mm/s 7 mm/s 58 mm/s 7.5 kW Fxasrqln 1200 mm 1600 mm 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

more

Listing

Halberstadt

6,724 km

CNC Travelling column milling machine 5-axis

FPT Industrie Spirit

Call

Condition: used, Year of construction: 2012, Ref. -No.: 10350 Crvyurg2b Manufacturer: FPT Type: Spirit Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

more

Listing

Hessisch Lichtenau

6,811 km

Single column - eccentric press

SCHULER PEn 315 / 180

€1,800

Call

Condition: used, Single column eccentric press SCHULER type PEn 315 / 180 Machine No. 43-9756 Compressive force 31,5 ton. throat 185 mm width between the side columns 250 mm table size 610 x 370 mm table opening Ø 305 mm ram area 255 x 250 mm Vwjiuwgw3 clamping spigot bore Ø 50 mm stroke adjustment 8-100 mm ram adjustment travel approx. 80 mm Installation height approx. 290 mm Stroke rate 100 strokes/min. Table height above floor 780 mm motor power 1,5 kW Mains connection 380 Volt, 50 Hz - machine stand tiltable via threaded spindle - mechanical foot switch for stroke release space requirement L x W x H 1450 x 950 x 2250 mm dead weight 1,5 ton.

more

Listing

China

2,987 km

Hydraulic table-top single-column press

KRAFT VM-2018 | VM-3018 | VM-4018

Call

Condition: new, :VM-2018 | VM-3018 | VM-4018 x-travel:2300|3200|4100 mm y-travel:2000 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:2300x1600|3200x1600|4100x1600 mm table load:8|10|12 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000) 1/min spindle drive:15/18,5|22/26|22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:20/20/15|20/20/15|15/20/15 m/min feeds:1~10000 mm/min Tool changer:32 -fach workpiece length:350 mm tool diameter:110/225 mm Bp3d807msr weight of tools max.:20 kg positioning accuracy:0,020|0,025|0,03 mm repeating accuracy:0,015|0,020|0,025 mm total power requirement:60 kva machine length:7027|8927|10327 mm machine width/height:5217x4339|5217x4339|5217x4339 mm Weight approx.:22|26|30 t CNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain

more

Listing

Mörsdorf

6,664 km

VVB Zeulenroda 7-8 t

Call

throat depth: 190 mm, pressing force: 8 t, table width: 220 mm, table length: 340 mm, Condition: used, Hydraulic table-top single-column press made by VVB Zeulenroda Technical data: Pressing capacity approx. 7-8 tons Table size 220 x 340 mm throat 190 mm Stroke 250 mm Installation height 350 mm Ram diameter 90 mm External dimensions L x W x H 700 x 400 x 2000 mm Weight approx. 800 kg used, in good condition 7fhrqyr

more

Listing

Wien

6,310 km

CNC travelling column milling machine 5-axis

HARTFORD HB 3190 A

Call

Condition: used, Year of construction: 2004, x-travel 3000 mm y-travel 1970 mm z-travel 920 mm Control Fanuc 18 M column daylight 2200 mm tool taper 50 spindle turning speed - stepless 40-4.000 U/min table-size 3100x1830 mm Nktdppx toolpiece magazine: chain magazine 40 Stück drive of main spindle 22 kW total power requirement kW weight of the machine ca. 32 t dimensions of the machine ca. 9,7x6x4,7 m

more

Listing

Wiener Neudorf

(dealership location)

6,311 km

Double-Column Presse

SICMI MST 125

€1,04,000

EXW ONO plus VAT

Call

Condition: new, neu ca. 4 Monate ab Auftragse Italien Zq7ni2s 104000 2069.6 125 to 500 mm 1200x700 mm 600 mm 115 mm/s 7 mm/s 70 mm/s 15 kW 2550 mm 1500 mm 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

more

Listing

Halberstadt

6,724 km

FPT Industrie Area EVO 2

Call

Condition: used, Year of construction: 2008, Ref. -No.: 10347 Manufacturer: FPT Type: Area EVO 2 Year of construction: 2008 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt - Germany Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information: 3D M Sensor MAS probe Fzglgc8 CNC controlled angle head: micro

more

Listing

Hessisch Lichtenau

6,811 km

Column drilling machine

IMATEC AV-32

€2,900

Call

Condition: used, Year of construction: 1995, Column drilling machine IMATEC type AV-32 Machine No. 1775-1 Year of construction approx. 1995 drilling capacity 32 mm spindle mounting MK 3 long spindle sleeve throat 300 mm pinol stroke 150 mm table size 420 x 300 mm column diameter 125 mm spindle speed 80-1170 rpm infinitely variable motor power 0,9 and 1,5 kW pole changeable mains connection 380 volt, 50 Hz - 2 motor speeds and belt drive with stepless speed adjustment - emergency stop - right- left rotation - automatic feed 0,1 mm/rev - table height adjustment via hand crank - clamping surface at machine base 450 x 400 mm - Coolant device in machine base - illumination - Quick-action drill chuck CAP, 0 to 13 mm Bcv00hldarp Space requirement L x W x H 900 x 500 x 1950 mm weight 320 kg good condition

more

Listing

China

2,987 km

Double column press / Straight side press

KRAFT/Skymaster VF-1290 (Highspeed)

Call

Condition: new, Year of construction: 2021, x-travel:1200 mm y-travel:800 mm z-travel:500 mm distance spindle center to table:150-650 mm distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK- A63 spindle speed:15000 (Direktantrieb) U/min spindle drive:9/15 kW Spindle motor torque:57.3/120 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~10000 mm/min Tool changer:20 max. tool diameter:100 mm max. tool length:235 mm max. tool weight:8 kg total power requirement:30 (opt. 80) kva Weight approx.:12 t Machine size (LxWxH):4808×4773×3215 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Fanuc oi MF (FANUC Oi-MF absolute type 1 controller system, 15"LCD High quality machining package?AICC II,jerk control,smooth tolerance, control,machining quality level adjustment function)?data servo(1GB) ,picture function ,pre-read 400 block) automatic tool changer:20/24 B3gtyusa Scales:von FAGOR tool measuring system:von Blum workpiece measurement system:von Blum oil mist collector:von Losma/Italien

more

Listing

Strassberg

(dealership location)

6,847 km

LOIRE ESLK

Call

Condition: used, Year of construction: 1993, Pressure total: 800 ton Blankholder capacity: 500 ton Ram capacity: 300 ton 72e8wye Stroke: 750 mm Blankholder stroke: 750 mm Ram stroke: 1100 mm Daylight: 1900 mm Table surface area : 2800 x 1800 mm Slide area: 2800 x 1750 mm Die cushion capacity in table: 200 ton Die cushion stroke: 280 mm Die cushion pad area: 2050 x 1600 mm Approach speed: 300 mm / sec Working speed: 1 - 50 mm / sec Return speed: 220 mm / sec Oil volume: 3000 l Height over floor approx.: 6500 mm Weight of machine approx.: 120 ton

more

Listing

Wien

6,310 km

Travelling column milling machine

FPT Industrie Pragma M40

Call

Condition: used, Year of construction: 2001, x-travel 4000 mm y-travel 2000 mm z-travel 1200 mm Binytnidaxu Control Fidia C20 spindle turning speed - stepless 10-4.000 U/min angular milling head - universal A2,5grad-B 2,5grad total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

more

Listing

Bünde

6,894 km

Eccentric Press - Single Column

MUELLER AMP 60

Call

Condition: used, Year of construction: 1965, pressure 60 t throat 280 mm stroke 140 mm table-size 750 x 520 mm Strole of rum/minute 100 ram adjustable 55 mm stroke adjustable from - to 10 - 140 mm mould space 340 mm hole in the table 230 x 175 mm table adjustable 220 mm tool hole in ram 40 mm total power requirement 2,95 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 1,5 x 1,2 x 2,4 m Condition: ready for operation Video(s) available on our website. Electric 380 Volt Foot switch adjustable table Trbu9mfdo Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m².

more

Listing

Halberstadt

6,724 km

CNC - Traveling column - machining center

AXA VHC-2-5000 XTS

Call

Condition: used, Year of construction: 2007, Ref. -No.: 10201 Manufacturer: AXA Type: VHC-2-5000 XTS Year of construction: 2007 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine length: 9400 mm Machine width: 3500 mm Machine Height: 3300 mm X-Travel: 5000 mm Y-Travel: 600 mm Z-Travel: 800 mm Power Capacity: 45 kW Weight: 23 t Swivel range milling head: +/-90 ° Tool Taper: SK 50 Tool places: 26 Spindle Speeds: 30 - 9000 RPM Xkmafkbo Tool change time: 6 s Vertical working height: 0 - 740 mm Working height horizontal: 250 - 1050 mm

more

Listing

Hessisch Lichtenau

6,811 km

Column-controlled band sawing semiautomatic

METORA HMB 380 DS

€6,800

Call

Condition: used, Year of construction: 1993, Column guided bandsaw semi-automatic METORA type HMB 380 DS only for 90° cuts (Made in Austria) Machine. No. 4580028 Year of construction approx. 1993 Cutting range round Ø 380 mm square 380 x 380 mm saw band dimension 5650 x 34 x 1,1 mm saw band speed 25-108 m/min. infinitely variable material infeed height 870 mm drive power hydraulics 1,5 kW Drive power saw motor 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic band saw in two-column design - Hydraulic saw bow lowering with stepless cutting pressure adjustment - Lowering speed infinitely variable - Hydraulic clamping of clamping vice, bundle clamping Gcxfgtf - Hydraulic power unit integrated in machine base - Material feed roller on the infeed side with gear motor - Coolant unit with cooling lubricant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for cooling water and hydraulics - Cross cut fence TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic fence carriage clamping fence length 6750 mm, fence travel 5650 mm, fence arm can be folded up hydraulically Stop roller conveyor 4 meters, roller width 500 mm, total width 680 mm (see stock no. 57313) Space requirement of the basic machine L x W x H 2800 x 1400 x 2450 mm Weight of the machine approx. 3 ton. Weight of roller conveyor approx. 500 kg weight of the stop system approx. 800 kg good condition

more

Listing

China

2,987 km

KRAFT/Skymaster VF-1290 (Highspeed)

Call

Condition: new, x-travel:1200 mm Bbpg3rrk y-travel:800 mm z-travel:550 mm distance spindle center to table:150-700 mm distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:7.5/11 (opt. 30/39; 20/26 kW Spindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/min Tool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mm max. tool length:300 (opt. 220) mm max. tool weight:8 (opt. 4) kg total power requirement:30 (opt. 80) kva Weight approx.:12 t Machine size (LxWxH):5026x4276x3210 mm positioning accuracy:0,014 mm repeating accuracy:0,008 mm CNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool measuring system:von Blum workpiece measurement system:von Blum oil mist collector:von Losma/Italien

more

Listing

Staufenberg

6,818 km

Unbekannt 150 t (Tisch 800 x 800 mm)

Call

installation height: 780 mm, motor power: 15 W, pressing force: 150 t, table width: 800 mm, table length: 800 mm, ram stroke: 500 mm, Condition: used, Hydraulic double column press Fabr. unknown Technical data: Pressing force 150 t / 0 - 600 kp/cm² Cylinder diameter 260 mm Stroke 500 mm Table size 800 x 800 mm Installation height 780 mm Drive power 15 kW External dimensions approx. 2250 x1400 x 3000 mm Weight approx. 6.2 t Functions - with and without throttle - with and without ejector 30musxda - Lower and upper piston - Set-up - Injection press 0-10 - Quick presses 0 - 150 sec. - with and without venting - T-slots in upper and lower table used, in good condition

more

Listing

Wien

6,310 km

Double column press / Straight side press

AWEA - CNC SP 3016

Call

Condition: used, Year of construction: 2006, x-travel 3000 mm y-travel 1600 mm z-travel 760 mm Control Fanuc 18i MB column daylight 1700 mm table surface area 3260x1500 mm passage 1000 mm table load 10 t drive of main spindle 22 kW spindle turning speed - stepless 10-6000 U/min tool taper ISO 50 rapid travel 20.000 mm/min rapid traverse Z-axis 10.000 m/min toolpiece magazine: chain magazine 32 Stück diameter of tools max. 127/215 mm Power connection 60 kVA total power requirement kW weight of the machine ca. 27 t Maiyr7sx9r dimensions of the machine ca. 9x4,7x4 m

more

Listing

Strassberg

(dealership location)

6,847 km

REIS TUS 160 OK - 100

Call

Condition: used, Year of construction: 1983, machine/vehicle number: 393 421, Pressure total: 100 ton Daylight: 2.000 mm Ram stroke: 1.800 mm Table surface area : 1.800 x 1.550 mm Slide area: 1.800 x 1.550 mm Free frontal opening L-R: 1.620 mm Distance between the columns F - B: 820 mm Ejector Force: 30 kN max. capacity of swivelling ram plate: 6 ton Sgsbb Die Weight on table max.: 8 ton max. capacity of tilting table: 6 ton Oil volume: 200 l Required power: 15 kW Dimensions L x W x H: 6,65 x 2.94 x 5,82 m Weight of machine approx.: 22 ton

more

Listing

Deutschland

6,760 km

Travelling column milling machine

SORALUCE FL 5000

Call

Condition: used, Year of construction: 2009, x-travel 4.500 mm y-travel 1.800 mm z-travel 1.200 mm Control HEIDENHAIN ITNC - 530 handwheel HEIDENHAIN 520 milling head -swivable +/- 2,5 X 2,5 ° Internal cooling system 20 bar coolant 1.000 L tool change unit 40 pos. Chip coveyor 2 St. Tool adapter ISO 50 J783j0sg Control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

more

Listing

Hessisch Lichtenau

6,811 km

Pneumatic Single Column Press, Direct Acting Druc

GECHTER 8 kN LP ES 06

€4,200

Call

Condition: used, Year of construction: 2017, Pneumatic single column press GECHTER type 8 kN LP ES 06 Direct acting pneumatic press, Linear acting pneumatic press Machine. No. 09000051 Year of construction 2017 Compressive force 0,8 ton. throat 120 mm table area 168 x 200 mm ram surface 35 x 32 mm ram stroke 150 mm installation height 73 - 240 mm adjustable Clamping spigot bore Ø 10 mm with clamping piece Compressed air requirement 7 bar Mains connection 230 Volt, 50 Hz Power requirement 0.35 kW - stroke end position OT mechanically adjustable via stop spindle at stroke cylinder - pressing cylinder height adjustable via threaded spindle at the stand Ezd8zbr - electrical 2-hand safety control ES06 with safeballs - Pressing force adjustment via digital pressure reducer with digital display - quick shut-off for compressed air supply via slide valve - operating instructions Space requirement L x W x H 745 x 505 x 1418 mm weight approx. 61 kg very good condition, as new

more

Listing

China

2,987 km

KRAFT VM-3018A

Call

Condition: new, Year of construction: 2022, x-travel:3200 mm y-travel:2000 mm z-travel:1000 mm distance spindle nose and table:200-1200 mm distance between columns:1820 mm table-size:3200×1600 mm table load:10 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT spindle speed:6000 (Direktantrieb) 1/min spindle drive:22 kW Spindle motor torque:689/1692 Pzsf7 rapid traverse in x-y-z axis:20/20/12 m/min feeds:1~10000 mm/min Tool changer:Vorbereitung für WZW workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg positioning accuracy:0,025 mm repeating accuracy:0,02 mm total power requirement:60 kva machine length:8927 mm machine width/height:5535/4650 mm Weight approx.:26 t automatic tool changer:Optional, vorbereitet CNC controller:FANUC OI MF absolute 1 controller with 15?SCREEN, high quality mold machining package(AICC2,smooth tolerance control, jerk control, gear box:von Barufaldi

more

Listing

Staufenberg

6,818 km

Straightening Press - Double Column

SCHÖN SH / C 65 (65 t) Hubbegrenzung

Call

installation height: 400 mm, throat depth: 260 mm, pressing force: 65 t, Condition: used, Year of construction: 1980, Hydraulic double column press, SCHÖN type SH / C 65 Year of construction 1980 Technical data max. pressure capacity 65 t max. installation height 400 mm projection 260 mm Table size 500 x 600 mm opening in table 380 x 120 mm 3sanqqqg maximum stroke 150 mm Clamping spigot hole 50 x 70 mm Operating pressure 200 bar Drive power 11 kW External dimensions approx. 1100 x 1500 x 2900 mm With - light barrier - Two-hand release - stroke limitation Used

more

Listing

Korschenbroich

7,030 km

BLE A800

Call

Condition: used, pressure 800 t distance between columns . mm stroke . mm total power requirement . kW weight of the machine ca. . t Bim0kx2nwkt dimensions of the machine ca. . m

more

Listing

Taiwan

4,329 km

Double Column Milling M/C - Gantry Type

KRAFT HDT-18|HDT-21|HDT-24

Call

Condition: new, :HDT-18|HDT-21|HDT-24 x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1800|2100|2400 mm z-travel:800/1000 mm distance between columns:1850|2150|2450 mm w-axis:N/A table width:1200|1500|1800 mm table length:= X-Weg distance spindle nose and table:555~1355 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) 9uecccke feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:5,9|6,2|6,5 m Weight approx.:20t+2t/m|22t+2t/m|24t+2,5t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/90/120

more

Listing

Staufenberg

6,818 km

Controlled hydraulic single-column press

HYDRAP HKP 6.3 mit Steuerung Siemens

Call

installation height: 480 mm, throat depth: 210 mm, pressing force: 6 t, ram stroke: 200 mm, Condition: used, Year of construction: 1990, Controlled hydraulic single-column press HYDRAP type HKP 6.3 Machine. # H 40/6482, year of manufacture 12/1990 Technical data: Pressing force 6.3 t Stroke 200 mm Projection 210 mm Installation height 480 mm Cylinder diameter 85 mm Operating pressure 125 atü Speed 100 mm/sec. Return force 8.6 t Lifting speed down/load/up 380/38/380 mm/sec. Sfpo37h9u Connected load 3.0 kW Overrun value 55 mm Overrun time 150 m/s Safety distance 295 mm External dimensions approx. 1000 x 1050 x 2000 mm Weight approx. 1.0 t With - Pressure and travel-dependent control Siemens CL 301 - Bosch BT 1 - Two-hand release used, from a company liquidation, in good condition Particularly suitable for bending, embossing and straightening

more

Listing

Taiwan

4,329 km

Double Column Milling M/C - Gantry Type

KRAFT SD(W)-24|SD(W)-28|SD(W)-32

Call

Condition: new, :SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/240 00/36000 mm y-travel:2400|2800|3200 mm z-travel:1100/1400 mm distance between columns:2450|2850|3250 mm w-axis:1500/2000 mm für SD(W) table width:1600|2000|2400 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 12/12/10/1 m/min machine length:13,5m~43,5 m machine width:6,5|6,9|7,3 m Weight approx.:50t+2t/m|53t+2,3t/m|56t+2,6t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse 2ffl9a8gg Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/90/120

more

Listing

Staufenberg

6,818 km

SCHÖN TES 25 (25 t)

Call

pressing force: 25 t, ram stroke: 100 mm, Condition: used, Year of construction: 1977, Hydraulic double column press SCHÖN type TES 25 Serial # 1656 Year of construction 1977 Technical data: Punching force 25 t Distance between columns / uprights 630 mm gr. distance from clamping surface to ram 350 mm Clamping surface 580 x 320 mm gr. ram stroke 100 mm Bilog8qqry3 Weight approx. 1100 kg Dimensions approx. 1200 x 800 x 2100 mm Used

more

Listing

KRAFT FD-2122 m. Kopf f. 5 Seitenbearbeitung

Taiwan

4,329 km

KRAFT FD-2122 m. Kopf f. 5 Seitenbearbeitung

Call

Condition: new, Year of construction: 2023, x-travel:3200 mm y-travel:2100+650 mm z-travel:1100 mm distance between columns:max. 2150 (ohne Spritzschutz) mm table-size:3000*1800 mm cross section of ram:450x400 mm Bgvjhfibnja :BBT-50, 6000rpm, 22/26kW+Gearbox (1:4) :Fanuc OiMF+10.4"LCD table load:max. 15 t

more

Listing

Staufenberg

6,818 km

Travelling column milling machine

SCHÖN SHK 15 (15 t) mit UVV

Call

installation height: 200 mm, pressing force: 15 t, ram stroke: 100 mm, Condition: used, Year of construction: 1980, Double column press SCHÖN type SHK 15 serial # 2724 year of construction 1980 with UVV Technical data: Compressive force 15 t Stroke 100 mm Stand width 500 (120) mm Table dimensions L x W 320x440 mm Installation height 200 mm Plunger surface 140 mm Pusher piston 125 mm Total drive power 3.0 kW Weight approx. 1500 kg Dimensions (LxWxH) approx. 1200 x 1000 x 2100 mm With - Accident prevention regulations (UVV) / light barrier used, in good condition Jbyxh28an

more

Listing

Stockstadt

(dealership location)

6,895 km

KRAFT TCM-266/366/466/666/866

Call

Condition: new, x-travel:2000 | 3000 | 4000 | 6000 | 8000 mm y-travel:600 mm z-travel:600 mm distance spindle nose and table:110-710 mm table load:2000/ 3000 / 4000 / 5000/ 5500 kg spindle taper:40 (50 opt.) BT/SK spindle speeds:60 - 8000 1/min spindle drive:11/15 kW rapid speed:16/24/24 m/min feed range:1 - 10000 mm/min tool piece magazine with:24 (30 opt.) Stk. diameter of tools max.:150 mm (24 Werkzeuge) \ 180 (30 Werkzeuge) mm workpiece length:300 mm Ju8udi weight of the machine ca.:22 t weight of tools max.:7 kg positioning accuracy:± 0.005 mm repeatability:± 0.005 mm tool changing time:2,5 sec coolant capacity:470/550/660/830/980 l machine weight:14000 / 16500 / 22000 / 24000 / 26000 kg ATC:24 pos fach CNC controller:Heidenhain 620 chip conveyor - auger:auf der Rückseite des Tisches Machine semi-cover:oben offen :20 bar ATC:30 fach tool measuring system:Renishaw TS-27R :sowie 2 Tage Schulung Traveling Column 5 Axis Machining Center

more

Listing

Staufenberg

6,818 km

Hydraulic single-column press Drawing press

ZEULENRODA PYE 100 S1 mit Ziehkissen

Call

installation height: 1,000 mm, throat depth: 360 mm, pressing force: 100 t, Condition: used, Year of construction: 1981, Hydraulic single-column press ZEULENRODA type PYE 100 S1 Machine. # 023/036-104, year of manufacture 1981 Technical data: Pressing force 100 t Retraction force 20 t Operating pressure 160 kp/cm2 Projection 360 mm Installation height 1000 mm Table size 900 x 560 mm Stroke length ram stroke 500 mm Ram speed 200 mm/s Return speed 200 mm/s Connected load 17 kW Dimensions 1200 x 1900 x 3030 mm Weight approx. 5040 kg With Bqxcwvpd - drawing cushion - two-hand release used

more

Listing

Stockstadt am Rhein

6,895 km