Used Tos Sn 50 C for sale (90,944)

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 10,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, SPECIFICATION: Pjdpfx Aoxbgn Ijahsgu Longitudinal stroke “X” axis 10000mm + 1000mm for pick up the milling head Cross stroke “Z” axis 1500 mm Spindle headstock vertical travel “Y” axis 2500mm Two re-circulation ball screw on vertical axis Controlled continuously in 7 axis Heidenhain iTNC 530M with alternative control smart NC cyborg TE 530 with mouse 1 x pcs Rotary table CES size 2000 x 2500 mm in specification Two floor plates 6400x1900mm,

Condition: used, functionality: fully functional, turning diameter: 160 mm, turning length: 6,500 mm, total length: 10,000 mm, overall weight: 10,000 kg, TOS Čelákovice Lathe SUS 80x6500 with Whirling Technology (Burksmüller) Psdpfxew Tmvqo Aahsgu Total length: 6500 mm Equipped with Burksmüller whirling technology Comes with a wide range of accessories and tools

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Pjdew N D T Sjpfx Aahsgu Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm Psdpfxswzkywj Aahsgu • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min Pgodpfx Aolc Uk Ieahou feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately. Pgodpfsmk E D Ijx Aaheu

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg Psdsb Hbx Njpfx Aahsgu

Condition: excellent (used), functionality: fully functional, center height: 160 mm, workpiece weight (max.): 250 kg, grinding length: 1,500 mm, grinding wheel diameter: 203 mm, total width: 23,500 mm, total length: 62,500 mm, total height: 17,000 mm, grinding diameter: 320 mm, spindle speed (max.): 1,470 rpm, table speed: 5 mm/min, overall weight: 5,900 kg, year of last overhaul: 2016, power: 7.5 kW (10.20 HP), BHU 320 x 1500 roller grinder. Prod. by TOS Hostivar Czech Republic - Major overhaul 2016. Grinding diameter 320 mm Grinding length 1500 mm Center height 160 mm Dimensions of the grinding wheel 500 x 80 x 203 mm Speed of the grinding spindle 1470 rpm. Grinding spindle - quick adjustment 60 mm Table speed - return 0.005 - 0.05 mm Automatic feed 0.1 - 5 mm/min Workpiece weight max. 250 kg Grinding head rotatable +/- 45° Taper in tailstock MK 5 Workpiece advancement rotatable 90 degrees Psdjtzwy Ijpfx Aahsgu Grinding spindle drive 7.5 kW Weight of the machine 5900 kg Overall dimensions (L X W X H) 6250 x 2350 x 1700 mm

Condition: excellent (used), track width: 360mm shaft width: 350mm max disc diameter: 350mm disc bore diameter: 80mm max cutting height: 120mm electric lifting of the saw shaft electric lifting of the body smooth regulation of feed speed Pedpou Evqnsfx Aahogu feed motor: 2,5kW main motor: 45kW

Condition: reconditioned (used), Year of construction: 2001, , Basic information Manufacturer TOS SVITAVY Type PKSN 32 B Category Multiripsaws Shipping Delivery to be agreed Terms Technical parameters Maximum Working Width #### mm 400 Machine with simultaneous transport and processing of the element The machine is CE marked Used machine Minimum Working Length #### mm 330 Engine power #### kW 55 Supply voltage #### V 380-400 Safety Guards Completely renovated Electrically Controlled Adjustments Technically efficient Perfect condition Shank Diameter #### mm 70 With one tool spindle With noise reduction housing Cast iron body Feed Speed #### m / min 36 Spindle Lock Maximum cutting height #### mm 160 New Electricity New Mechanics New Pneumatics New Painting Noise Level #### Db 70 Right and Left Rotation Podohixkhepfx Aahsgu Automatic adjustment Very good condition Cutting width #### mm 400 Machine width #### mm 1800 Machining Width Saw blade diameter #### mm 400 Machine weight #### kg 3500 Machine dimensions #### x #### x #### mm 1600x1800x2500 Cutting Height Machining height #### mm 160 With freely adjustable speed With the transport of the element in the machine

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw Pgedpfxjv Hzqxs Aahou 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: used, Year of construction: 1996, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Pgedpfx Aovlxbxjahou

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg Podpfod Ar Uxsx Aahsgu

Condition: used, Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: mm Pgjdpfjdc R N Tex Aahju -Passage: Ø 32 mm -Part head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer -Input: 220 V -Output: 29.5 V 17 A. -(technical data see photos) -Number: 2x available Pgsdpfjb S Htdex Aahju -Price: per piece -Dimensions: 140/120/H120 mm -Weight: 12 kg

Year of construction: 1997, condition: used, Belt conveyor slider 11170-55-50 Make: Transnorm Year 1997 Length:1170 mm Belt width: 50 mm Stand dimensions: 200x100 mm Current conveyor belt height: 100 mm Distance between mounting plate and swing plate: 100 mm (swing mechanism): 100 mm Maximum ejection rotation angle: 360° Belt conveyor speed: 0,64m/s Electrical data Belt conveyor motor data: V300-500, kw 0,25/S1 Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Pgsdsur Anrjpfx Aahju Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, functionality: fully functional, turning length: 450 mm, turning diameter: 550 mm, Competence Meets Precision: CNC Lathe with C-Axis Pedjw T Tllspfx Aahogu Discover the TN500‑450 from the STAR TN Series by GreMaT – a CNC lathe that distinguishes itself through its robust monoblock construction and advanced technology. The Siemens 828D control system offers intuitive operation and maximum manufacturing precision, making it ideal for modern production environments. 2. Technology & Key Advantages at a Glance Integrated Motor Spindle Drive Available as a “built-in spindle” with high rotational speeds – belt-driven or direct drive – ensuring exceptional rigidity and dynamic machining performance. 12-Position BMT Power Turret High tool flexibility with a 12-position turret, C-axis, and hydraulic brake – perfect for complex milling and turning operations. Hydraulic & Servo-Programmable Tailstock Hydraulically operated as standard, optionally servo-programmable – for flexible workpiece support and advanced automation. Robust Monoblock Cast Construction Maximum stability and vibration resistance thanks to a one-piece machine bed – the foundation for long-term precision and durability. Key Technical Data (Selection) Feature Data Workpiece Length 450 mm Swing Over Bed Ø550 mm Spindle Bore Ø66 / Ø75 mm (optionally Ø86 mm) Main Spindle Power up to 30 kW, speeds up to 4000 rpm Tool Stations 12 (BMT45/BMT55) Tailstock Stroke 100–500 mm (Hydraulic / SPT) Weight approx. 5,400 kg Dimensions (L×W×H) 2860 × 1950 × 2200 mm 3. Experience It Live at EMO 2025! See the TN500-450 in action at EMO 2025 – witness intelligent control, robust construction, and complete tooling flexibility in a live demonstration. 4. Your Advantage – Secure Your Tickets Now! 👉 Get your free EMO tickets now and schedule a personal consultation! Contact us for details! 5. Why the TN500-450? - Robust & precise: Monoblock design ensures maximum stability - Modern & automatable: Siemens 828D control + servo-programmable tailstock - Versatile & productive: 12-position turret with C-axis - Compact & efficient: Ideal for short parts with high load capacity

Year of construction: 1998, condition: used, machine/vehicle number: 23 800 029, table mounting size: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle taper: SK 50 spindle turning speed range: 56 - 2800 rpm carriages longitudinal and cross: ca. 10 - 1800 mm/min carriages vertical: 2,5 - 450 mm/min electrical connection: 400 V, 16 kVA kW space needed: 2000 x 2250 x 2150 mm Pjdpfx Ae Ici Ujahjgu weight: 4500 kg

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs Pgedpfxoiqi S Nj Aaheu 2. Hydraulic log splitter. 3. Feed conveyor. 4. Scraper bark conveyor. 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new

Year of construction: 2002, condition: good (used), Heidenhain TNC 124 X-700 mm Y-500 mm Z-500 mm taper SK40 Pjdoinukmspfx Aahogu Spindle speeds 63-3150 rpm Table 900 x 500 mm weight of machine 2500 kg machine checked before delivery spare-parts available

Condition: new, AXLT325SNG3210-D-476-1004-F0-XX00-C-1, NTN SNR linear table with synchronous motor Model: AXLT325SNG3210-D-476-1004-F0-XX00-C-1 + 1FK7080-2AF71-1CH1 Type: AXLT325S Condition: New Pgedpfxevrf Tue Aahju

Condition: new, AXC80ZKR28-C-900-1340-00-0000-0-0, NTN SNR, linear axis, L=134cm Model: AXC80ZKR28-C-900-1340-00-0000-0-0 Psdpfx Aovrgq Usahegu Condition: New

Condition: used, AXC120ZKR38-C-1300-2120-00-0000-0-0, NTN SNR, linear axis Model: AXC120ZKR38-C-1300-2120-00-0000-0-0 Condition: Used Pjdpevrgntsfx Aahsgu

Condition: new, AXDL160ZGR22-D-1700-2040-E0-00XX-C-A, NTN SNR linear axis + gearbox + motor Model: AXDL160ZGR22-D-1700-2040-E0-00XX-C-A + NP 025S-MF1-5-1G1-1S + 1FK7060-2AF71-1CH1 Pjdevrf Ekopfx Aahegu Type: AXDL160Z Condition: New

Condition: new, AXC80ZGRK22-C-900-1340-00-XX00-E-A, NTN SNR, linear axis, L=134cm Pgedpsvrhwcsfx Aahsu Model: AXC80ZGRK22-C-900-1340-00-XX00-E-A Condition: New