Used Trash Compactor for sale (495)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. Ijdpfxsyzr Nmo Ahnstl The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Year of construction: 2026, condition: used, General information New: Yes Colour: Grey Reference number: 5 Weights Empty weight: 650 kg Functional Dimensions of cargo space: 120 x 80 x 60 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new excavator mounted Vibration Compactor Plates. We have 4 different models. ACP15 excavator mounted compactor which is 600kg and fits on excavator 8-17ton. Contact us for details. We have compactors in stock from 220kg to 930kg. Isdjyya Hdjpfx Ahnjtl PLAQUES VIBRANTES, VERDICHTERPLATTEN, PLACAS VIBRATORIAS, PIASTRE VIBRANTI, VIBRATING PLATE COMPACTORS, FARFURII COMPRESOR, TRILBLOK, ЦОМПРЕССОР ПЛОЧЕ, KOMPRESOR PLOČE, KOMPRESSORPLATTOR, COMPRESSOR PLATER, COMPRESSORE PLATES, КОМПРЕСОРИ ТАБЕЛИ, KOMPRESSZOR PLATES, PLACAS COMPRESSOR

Condition: used, Year of construction: 2007, ----Construction: Bomag tamper BT 60/4, year of manufacture 2007, weight 62 kg, base dimensions: 340x280mm, Honda petrol engine GX 100 / 2.5 KW Iodpevxpc Hsfx Ahnjtl Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, Year of construction: 2016, operating hours: 101 h, ----Configuration: Vibratory plate with a Kohler KDW 1003E527A 3-cylinder diesel engine. Operating weight 810 kg, working width 970 mm, maximum working speed 28 m/min, gradeability 32%. Itodpowlmipefx Ahnol Sale to commercial customers only. FOR EXPORT SALES, ONLY THE NET PRICE IS PAYABLE. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see Legal Notice).

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Iedpsvq Rirsfx Ahnotl Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. Itodpfxofhmmxs Ahnol The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Year of construction: 2026, condition: new, BTS-Bags for BTS-Plastic Foil Compactor / Sack Holder BTS-Bags 240l („Made in Germany“) transparent and from high quality LDPE reclaim / regenerat Ijdpfsi Dbfpsx Ahnstl 10 bags per roll / 10 rolls per box Plastic Film Compactor, Sack Holder, Foil Compaction Rack, Film Compaction Rack, Film Collection Pedestal, Plastc Film Foil disposal

Year of construction: 2026, condition: new, BTS-Bags for BTS-Plastic Foil Compactor / Sack Holder Ijdpoi Dbfzofx Ahnetl BTS-Bags 240l („Made in Germany“) transparent and from high quality LDPE reclaim / regenerat 10 bags per roll / 10 rolls per box Plastic Film Compactor, Sack Holder, Foil Compaction Rack, Film Compaction Rack, Foil Collection Pedestal, Plastic Film Foil disposal

Condition: new, Year of construction: 2026, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Ijdpfx Ahsvbrfisnotl Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Itsdpfx Ahozdr Tensl Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert AUTO compaction cycles Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Press, Barrel Compactor for Metal drums / Plastic drums

Condition: new, Year of construction: 2026, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Ijdpfovbrfcsx Ahnjtl Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-240 Bin Compactor is ideal for material compacting in your 240 Ltr. garbage and recycling bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 2 Ton Compaction: up to 80 % (material depending) Machine size: 2360 H x 780 W x 780 D mm Machine weight: 234 kg Transport height: 2360 / 1754 mm (on request) Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces frequency of waste collection A quality product “Made in Europe” Iodpsbqg Rfjfx Ahnotl Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized AUTO compaction cycles with E-stop and locking key Bag press insert Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Itodpfx Aobhu Iqohnjl Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting Dry and wet waste materials Recyclable materials Paper and cardboard Light valuable materials Optional extras Machine colour RAL Machine galvanized PLC auto compaction cycles Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Isdpfen Argijx Ahnstl User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2004, condition: used, functionality: fully functional, ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 200 Machine for compaction of the raw material is exclusively effected by the press rollers under hydraulic pressure. Specifically for use in the production area. Built in 2004. CHARACTERISTICS - Control system: external control cabinet - Roller diameter: 200 mm - Roller width: 75 mm PRODUCTION - Output: up to 500 kg/h - Maximum pressing force: 20 kN/cm - Maximum roller gap: 5 mm - Maximum roller speed: 38 U/min DIMENSIONS Isdpfeycw Uvex Ahnotl - Footprint: 2,010 mm x 1,245 mm x 1,700 mm - Weight: 2,450 kg - Cabinet size: 2,100 mm x 800 mm x 600 mm - Weight without switch cabinet: 2,050 kg - Switch cabinet weight: 400 kg

Condition: used, Year of construction: 2018, operating hours: 4,800 h, Equipment: all wheel drive, Cat CB 2.5 from Caterpillar CB2.5 Tandem Vibratory Roller This is a compact compaction roller (tandem vibratory roller) from Caterpillar. * Operating weight: approx. 2.5 tons * Drum working width: approx. 1.0 m Itjdpfxew Thfgj Ahnsl * Engine: Caterpillar diesel engine * Vibration frequency & centrifugal force Only 4,600 operating hours Year of manufacture: 2018 Technical Specifications CB2.5 * Weight (ROPS): approx. 2,521 kg (5,546 lb) * Compaction width: 1,000 mm (39.4 in) * Engine power: 36 kW / 48.2 hp, model C1.7T * Vibration system: * Frequency: 64 Hz * Max. centrifugal force: 6,697 lb (~30 kN) * Dimensions: * Length: 2,520 mm (99.2 in) * Overall width: 1,112 mm (43.8 in) * Drum diameter: 720 mm (28.3 in) * Drum width: 1,000 mm (39.4 in) * Height (ROPS): 2,700 mm (106 in)

Condition: used, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, overall weight: 205 kg, Year of construction: 2022, machine/vehicle number: 2476268, Bomag BPR 35/60 D Itsdpjy Uhpiofx Ahnjl Technical specifications: Year of manufacture: 2022 Dimensions (L x W x H): 1.51 m x 0.60 m x 0.69 m Weight: 205 kg Ground clearance: 0.68 m Max. working speed: 27 m/min Max. climbing ability (depending on ground conditions): 32% Engine manufacturer, type: Hatz 1B20 Cooling: Air-cooled Power: 3.1 kW Speed: 3000 rpm Drive type: Mechanical Fuel: Diesel Fuel tank capacity: 3.0 l Centrifugal force: 35 kN Vibration frequency: 80 Hz Output (m³/h) at recommended layer thicknesses for earthworks: Gravel/sand: 21-30 Mixed soil: 17-24 Cohesive soil: 10-12 Engine protection bar, single-lever control, height-adjustable guide handle, oscillating arm guide handle, automatic shut-off in case of low oil level, reversing safety device Guide handle can be locked in transport and working position.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 74 h, machine/vehicle number: PC16 / P1551, Screw compactor and two 16 Cu Mtre closed skip units all manufactured to the highest specification by De Rooij in the Netherlands. All the equipment has been used inside a security shredding unit since new. It was decommissioned in 2023 and has only seen 74 hours of use since new. This equipment has been used by a bank for shredding currency and confidential wastes, and always situated inside a secure building. All in excellent condition and perfect working order. Ijdpfx Aov Ilphjhnetl

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden is available to assist you by phone. Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / Brand New / In Stock & Immediately Available Sales Price: €8,990.00 net / €10,698.10 gross 3-Year Manufacturer Warranty Technical Data Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 HP) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the sensors installed in the machine and displays them graphically using symbols - Similar to the previous engine protection from Weber MT, the engine shuts off whenever engine damage would be expected if operation continued - The user is also shown via symbols how to resolve any indicated faults - For a heavily soiled air filter, the cleaning and replacement procedure for the filter element is explained step by step - Weber Smart Assist also includes the COMPATROL compaction control, now presented with a new design - It provides the user with an easy-to-read and clearly understood bar graph display of the compaction progress - The machine operation is also new: once started, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically adjusts to the correct speed Itjdpfx Ajykhu Nehnjl The reversible soil compactors of the CR series stand out for their high compaction performance and top efficiency. They are the first choice for compaction work in classic road and civil engineering applications as well as paving. Balanced running properties, high smoothness, and low hand-arm vibrations ensure high operating comfort. CR 6 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic direction change are routed protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through the engine guard frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Enhanced operator convenience with electric start - Areas of application: road and civil engineering, paving, and thanks to its low height and working width, the CR 6 is also ideal for trench shoring We have a very large selection of different vibratory plates in stock and immediately available! Mr. Herden is happy to assist you by phone. On request, we can also provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For enquiries regarding the vibratory plate, please contact Mr. Herden (by phone). WEBER CR 5-II Hatz Diesel Vibratory Plate / New machine / In stock & immediately available Sale price: €6,290.00 net / €7,485.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out with their powerful compaction performance and highest efficiency. They are therefore the first choice for compaction work ranging from classic road and civil engineering to paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure excellent operator comfort. CR 5 – The all-rounder: - Infinitely variable forward and reverse travel. Hydraulic direction change - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide handle - Protection for machine and engine with engine protection frame and hood - Reduced maintenance through the self-tensioning centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and fast loading thanks to the large, foldable crane eye - Areas of application: earthworks, landscaping, bedding of concrete pavers, and compaction of sand, gravel or crushed stone Technical data: Engine: Hatz Diesel Engine power (max.): 5.4 kW (7.4 HP) Weight: 296 kg Centrifugal force: 42 kN Frequency: 77 Hz Working width: 55 cm Upon request, we are happy to provide a financing offer. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. With over 800 used vehicles, we are also among the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Itsdpfx Ajymv R Rohnel Errors and prior sale excepted. = Further information = New: Yes Engine make: Hatz For more information, please contact Marius Herden.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). WEBER CR 6 MDM Hatz Diesel Vibratory Plate Compactor / New machine / In stock & immediately available Sale price: €8,490.00 net / €10,103.10 gross 3-year warranty Shipping possible. The reversible soil compactors of the CR series impress with powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classical road and civil engineering to paving applications. Balanced running characteristics, a high level of smoothness, and low hand-arm vibration ensure superior operator comfort. CR 6 – Economical machine with high compaction performance: - Infinitely variable forward and reverse travel, hydraulic changeover - Throttle cable and hydraulic changeover routed securely within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable guide handle - Protection of machine and engine through engine guard frame and engine cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible Iodpfx Aoymv Sbshnjtl - Safe and quick loading thanks to large, foldable lifting eye - Secure lashing for transport via additional lashing points in the engine console - Increased operator comfort with electric start - Areas of application: road and civil engineering, paving construction, and thanks to the low height and working width, the CR 6 is also ideal for trench shoring Technical data: Engine: Hatz diesel Engine power max.: 7.5 (10.3) kW/hp Weight: 414 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Further information = New: Yes Engine make: Hatz Contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 7 MDM Hatz Diesel Vibratory Plate Compactor / New unit / in stock & immediately available Sales price: €9,190.00 net / €10,936.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their strong compaction performance and maximum efficiency. They are the first choice for compaction work in classic road and civil engineering, as well as paving construction. Balanced running characteristics, extremely smooth operation, and low hand-arm vibrations ensure a high level of operator comfort. CR 7 – Performance and Comfort in Perfection: Ijdpfjymv Snox Ahnotl - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle lever and hydraulic change-over protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through robust protective frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing: all maintenance points are easily accessible - Safe and fast loading via a large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets on the engine mount - Enhanced operating comfort with electric start including hour meter, engine oil and battery voltage monitoring - Fields of application: road and civil engineering, pipeline and trench construction, landscaping, sub-base for paving, setting pavers, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Maximum engine output: 7.5 (10.3) kW/HP Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm We can also provide a financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We provide the complete Weber MT product range for you! Subject to errors and prior sale. = Additional Information = New: Yes Engine make: Hatz Contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). Weber CR 9 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New unit / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3-year manufacturer warranty Technical specifications Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/hp Weight: 743 kg Centrifugal force: 100 kN Itedpfsyi Rzpex Ahnel Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Analyzes signals from the machine’s integrated sensors and displays them graphically using symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if continued operation would risk engine damage - Error symbols guide the operator step-by-step in troubleshooting - For an excessively dirty air filter, the cleaning and replacement process is shown step-by-step - Weber Smart Assist also includes the COMPATROL compaction control system, now in a new design - Displays compaction progress on an easy-to-read bar graph - New machine operation: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine speed is regulated automatically The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are first choice for classic road and civil engineering as well as paving applications. Well-balanced running characteristics, high stability, and low hand-arm vibration ensure outstanding operator comfort. CR 9 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic changeover are safely routed inside the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide handle - Protection of machine and engine by engine protection frame and motor cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, with all maintenance components readily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing points on the engine console - Greater operator convenience via electric start - Application areas: road and civil engineering, paving, and—thanks to the low overall height and working width—the CR 9 is also ideal for trench shoring We have a large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 8 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New Unit / In Stock & Immediately Available Sales Price: €11,190.00 net / €13,316.10 gross Itsdpfxoyi Rzve Ahnel 3-Year Manufacturer’s Warranty Technical Data: - Engine: Hatz Diesel - Max. Engine Output: 10.5 kW (14.3 hp) - Weight: 608 kg - Centrifugal Force: 75 kN - Frequency: 67.5 Hz - Working Width: 70 cm Weber Smart Assist (WSA): - Evaluates signals from the machine’s integrated sensors and displays them graphically via symbols - Similar to the previous Weber MT engine protection system, the engine will shut down whenever continuation could cause engine damage - Symbols also indicate to the operator how to resolve any displayed issues - In the event of a heavily soiled air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also features the newly designed COMPATROL compaction control system - Provides the operator with a clear and easily readable bar graph display of compaction progress - New operating concept: After starting the engine, vibration is activated at the press of a button - There is no throttle lever as the engine automatically adjusts to the correct RPM The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running properties, high operating smoothness, and low hand-arm vibrations ensure a high level of operating comfort. CR 8 – Economical Machine with Powerful Compaction: - Infinitely variable forward and reverse travel; hydraulic reversing - Throttle cable and hydraulic reversing system routed and protected within the guide handle - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Engine and machine protection via protective frame and cover - Lower maintenance requirements thanks to self-adjusting centrifugal clutch - Easy servicing with all maintenance components easily accessible - Safe and quick loading via large, foldable lifting eye - Secure tie-down for transport thanks to additional lashing points on the engine console - Greater operator comfort due to electric start - Areas of application: road and civil engineering, paving work, and, thanks to the low overall height and working width, the CR 8 is also ideal for trench shoring We have a large selection of various vibratory plate compactors in stock and available for immediate delivery! Mr. Herden will be happy to assist you by phone at ... Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For questions regarding the vibratory plate, Mr. Herden (Tel. ...) will be happy to assist you. Weber CR 7 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / in stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer's warranty Technical Data Engine: Hatz Diesel Maximum engine output: 7.9 (10.7) kW/HP Weight: 484 kg Itsdpfxsykhvae Ahnjl Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Weber Smart Assist (WSA) - Processes signals from the machine’s built-in sensors and visualizes them using graphic symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if operation would lead to potential engine damage - The user is also shown, via symbols, how to remedy any displayed issues - In the case of an overly dirty air filter, step-by-step instructions guide cleaning and replacement of the filter element - The Weber Smart Assist also includes the COMPATROL compaction control, now presented in a new design - Compaction progress is indicated to the user in a clear, easy-to-read bar graph - The machines now feature push-button activation for vibration once the engine has started - No need for a throttle lever, as the engine self-regulates to the correct speed automatically The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks in classical road and civil engineering as well as paving applications. Balanced running characteristics, high operating smoothness, and low hand-arm vibration ensure excellent operator comfort. CR 7 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel, hydraulic shift - Throttle cable and hydraulic switch protected within the guiding bar - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and quick transport with extra-large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Greater operator comfort with electric start - Applications: road construction, civil engineering, paving, and—thanks to the low overall height and working width—also optimal for trench shoring applications We have a very large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...