Used Traub Tnc 65 for sale (103)

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub Chodpfx Asz Agyajf Ajc TD 26 with boring unit + tool magazine Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor The machine can be inspected while powered on.

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Chsdpfxexu Dcvo Af Ajc Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Year of construction: 1984, condition: used, A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement. Chsdpfxjz Hlxmj Af Aoc

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Codsx A Hl Aopfx Af Aohc

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Scrapers and belts have been checked and replaced. The machine can be inspected while powered on. Chodpfx Afez Eqmte Aoc

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Chjdpfx Asz Eqh Def Aec Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Videos available upon request.

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Cedjzkvkqepfx Af Ashc

Condition: good (used), Year of construction: 1983, year of last overhaul: 2004, Turning center Manufacturer: TRAUB Type: TD36 Year of manufacture: 1983 Rebuilt: 2004 with: drilling tool holder, Chsdpfjz Hm Snex Af Aoc material feed system

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Chjdpfxezzahze Af Ajc Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Year of construction: 2005, condition: good (used), 7-position tool holder for CNC lathes Manufacturer: TRAUB, Model TNA 480, tool holder size VDI 40. Codpjhwnfkefx Af Aohc Also compatible with SAUTER tool turrets with VDI 40 mounting. 7-position horizontal tool holder, positions no. 3/4/5/6/7/8/9 for drilling and milling, price per piece: 550,- € 2-position horizontal tool holder, positions no. 1 and 2 for tapping, price per piece: 600,- € 1 NC drilling chuck VDI 40, clamping range 1-13 mm, price: 100,- € 1 NC drilling chuck VDI 40, clamping range 2.5-16 mm, price: 150,- €

Condition: good (used), Year of construction: 2002, functionality: fully functional, 1 x CNC turning center Traub TNA 300 Year of manufacture: 2002 (Spindle hours: 40746) Control: System TX 8 H with bar feeder LNS Hydrobar + chip conveyor Knoll Well-maintained machine with an extensive range of accessories, in excellent optical and technical condition. Accessories 33 x VDI 30 tool holders for turret (11 of which are driven) 1 x additional collet chuck with spindle reduction sleeve 10 x collet 181 E 10 x collet 171 E optional 1 x rotating steady rest in tailstock 1 x ATC optics Cjdpfx Afjwtlz Tj Ashc Complete documentation The machine can be inspected while running.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Traub Stamag DNH42/3000, year of manufacture 2008, DNH42, bar feeder, loading magazine, loader. Chjdpfxezp Ec Hj Af Asc

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Manufacturer: Traub Model: TK 42 Year of manufacture: 1986 With tailstock Spindle gearhead Chip conveyor Chjdpfx Afjzz Iylj Aoc Part conveyor The machine can be inspected while powered on. For an additional charge, a bar feeder can be supplied.

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Cjdpfxoz Aqkce Af Aohc Control system: TX8i with Traub tool monitoring Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system

Condition: good (used), Year of construction: 1986, functionality: fully functional, 1 x Multi-spindle lathe Traub TD 26 Year of manufacture: 1986 + Loading magazine Iemca AS 325/32 Year of manufacture: 1986 Chedpjzq Dm Tofx Af Asc Equipment: 6-station star-shaped turret Central lubrication Chip conveyor Accessories: Complete set of change gears for individual workpiece machining Complete documentation for the machine and loading magazine The machine can be inspected while powered on, or a video can be sent.

Condition: good (used), functionality: fully functional, 1 x Chip conveyor GS Industrietechnik Type: K-I-150 Year of manufacture: 2017 Suitable for Traub TD 16/26/36 The chip conveyor can be inspected while powered on. Chodpfezz I I Nox Af Ajc

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Chjdpfx Aozuzz Asf Aec

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Codozxihfjpfx Af Ashc

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Chsdpezxihrsfx Af Aec

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Csdpszxigujfx Af Aohc

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Chedszxig Ijpfx Af Aoc

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Chsdpfxezxihxe Af Aoc

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Chsdezxigzepfx Af Ajc

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Csdpfxjzxii As Af Ajhc

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Codpfx Aev Im Sdef Aehc