Used Traub Td 36 for sale (90)

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg Bsdpfewc Aqwjx Afhjcu * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Bcsdpfx Aevga A Tsfhou Long turning device Central lubrication Vogel Accessories: see photos The machine can be inspected under power.

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 Bodpfx Afjxv Sr Ishscu including chip conveyor, Resy filtration system In good condition, operated without loader, not under power

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm Bjdjtrvzxepfx Afhocu No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up * Bcodpfxju Rqabj Afhsu

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Bcodpfx Afowmqx Dehou

Condition: used, Year of construction: 2008, turning diameter 12,7 mm turning length 50 mm control Traub System TX 8i turning speeds 12000 U/min c-axis 0,001° gripping station 12,7 mm c-axis 0,001 ° speeds 12000 U/min Bcodpfx Aoygm R Ijfheu rapid traverse 15 m/min turret (x-stations) 6 worktool system 5+3 worktool system 3 Werkzeugsysteme total power requirement 2,5/4 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,1 x 1,7 m CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, TX8i control, spindle bore 65 mm, two turrets, turret 1 with Y-axis, turret 2 with steady rest, sub-spindle, chip conveyor, short bar loader. Bsdpfxeyghmqo Afhscu

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Bjdpfxoyf H Dls Afhecu Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm bar lenght min. 1000mm / max. 4200mm Bedpfx Aji Dagcofhscu

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Bcsdpoxrf Etefx Afhou Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: used, Year of construction: 1990, Numerous tool holders Power chuck Bedpfoyc Hgbsx Afhocu 12-position turret Machine type: CNC lathe Year of manufacture: 1990 Control: Traub TX 8 F Turning diameter: 480 mm Turning length: 800 mm Spindle bore: 65 mm Spindle speed: 40 - 4000 rpm Weight: approx. 5000 kg Dimensions (W x D x H): approx. 2950 x 1990 x 2000 mm Condition: used

Condition: excellent (used), Year of construction: 2007, operating hours: 24,993 h, functionality: fully functional, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic cleaning system – 2015 Mollart Drillsprint – Gun drilling / Deep hole drilling machine – 1996 Traub TNL 26 – CNC Swiss-type automatic lathe – 2004 Traub TNL 26 – CNC Swiss-type automatic lathe – 2007 Traub TNL 26 – CNC Swiss-type automatic lathe – 2009 Traub TNL 18 – CNC Swiss-type automatic lathe – 2013 Traub TNL 18 – CNC Swiss-type automatic lathe – 2014 Star SV-20R – CNC Swiss-type automatic lathe – 2019 Traub TNL18-9P – CNC Swiss-type automatic lathe – 2015 Traub TNL18 – CNC Swiss-type automatic lathe – 2014 Traub TNL18-9 – CNC Swiss-type automatic lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Rösler RWT 1000-I Rotary Table Blasting Machine – Blasting cabinet – 2012 Bending Machine C 202 M – Bending machine – 1990 Schmidt Hydro-pneumatic Press – Hydro-pneumatic press – 2021 TRAUB TNL 26 – CNC Swiss/short part automatic lathe General Model: TNL 26 Year of manufacture: 2007 Control: TRAUB TX8i Condition: used, operational Operating hours (under power): 33,905 h Kinematics & Configuration Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front attachment: yes Counter-operation: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tooling systems Upper turret Stations: 12 Live tooling positions: 12 Travel: X: 50 mm Z: 100 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Live tooling positions: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front attachment Stations: 5 Live tooling positions: 4 Travel X/Z: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Live tooling positions: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & Peripheral Equipment Coolant tank: included High-pressure coolant system: 70 bar Chip conveyor: included Workpiece conveyor: included Part removal and ejector: included Driven guide bushing: yes Bar feeder: included Electrical Data Supply voltage: 400 V Total connected load: 33 kW Dimensions & Weight Footprint: 3,706 × 1,292 mm Bedsycl Uwepfx Afhocu Machine height: 1,630 mm Machine weight: approx. 4,000 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm C-axis counter spindle: yes Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device Bcsdpeycl Udjfx Afhsu High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 246, turning length: 900 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8H, number of slots in tool magazine: 12, TRAUB TNA 400 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 36 kW - Rated current: 70 A Bedpfx Afsx Tzx Iohocu - Includes a tailstock and a HAINBUCH chuck, also equipped with a chip conveyor, TOOL EYE, and an additional chuck by FORKHARDT, diameter: 250 mm Note: The item must be picked up, bindingly, between 18th and 26th February 2026 on a date to be arranged. FCA D-78087 Mönchweiler - loaded onto truck

Condition: new, 3 safety windows suitable for CNC lathe TRAUB TNA 300 TNA 400 TNA 500 TNC 42 Bcjdpfx Afsw Edq Dshou TNC 65 Size: 660 x 480 mm Price: €500.00 / unit net Delivery time: immediately, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible. Bcjdpfjyfhmhsx Afheu

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Bsdpox Sw Icjfx Afhscu Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: good (used), Year of construction: 2013, operating hours: 43,000 h, functionality: fully functional, Description: The machine is in good technical condition; testing is possible by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feeding into the machine. Bsdpfx Afeyayz Tohscu As part of the delivery, we can also provide internal equipment—guide bushings and collets for the main spindle, sub spindle, and feeder—for material diameters of 3–12 mm. Maximum bar capacity: 20 mm (0.8 in) Z1 stroke max.: 205 mm (8.1 in), 80 mm (3.1 in) Maximum spindle speed: 10,000 rpm (both spindles) Power at 100% / 40%: 2.2 / 3.7 kW (3.0 / 5.0 hp) Torque at 100% / 40%: 14 / 23.5 Nm (10.3 / 17.3 ft-lb) C-axis resolution: 0.001 degrees Rapid traverse Z1: 40 m (1,574 in) / min Upper turret head Tool mounting: 8 positions Driven tools: 8 positions Power at 100% / 40%: 1 / 2 kW (1.3 / 2.7 hp) Mounting diameter: 45 mm (1.8 in) Turning tool section: 16 x 16 / 12 x 12 mm (0.6 x 0.6 / 0.5 x 0.5 in) X1 axis travel: 120 mm (4.7 in) Rapid traverse X1: 20 m (787 in) / min Chip-to-chip time: s

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on Bedjxz R Ilopfx Afhscu It is included barfeeder.

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet Bodpfx Aou Idn Hefhjcu - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. Bcjdpfxju Ix N Se Afhju *

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Bcedpfx Aoyc Nnzefhju Subject to errors and omissions.

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Number: 1x disc puller available Bodpfed R Ikdsx Afhscu -Price: per piece -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Condition: excellent (used), Multi-spindle & bar-turning lathes Bcjdpowc Aqdofx Afheu TRAUB TK 42 * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides