Used Tube Laser Cutting Machine for sale (66,639)

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Technical data Csdpfxsy Tmcxs Adpsrc Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Errors, prior sale and technical changes reserved.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Laser: CV-5000 (CO²) Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Credpfxjzbxn Ue Adpoc Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure.

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Crsdpfxshwrhfs Adpjc Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Codjhwri Sepfx Adpjrc Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 57,467 h, machine/vehicle number: 30003596, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: Bylaser 4400, laser hours: 57,467 h, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, power: 62 kW (84.30 HP), input voltage: 1,200 V, input current: 125 A, input frequency: 50 Hz, Equipment: CE marking, Bystar 3015 laser cutting machine from Bystronic. All maintenance has been carried out correctly by Bystronic and is up to date. The machine is ready for operation and is currently in use. Includes automation with Bytrans 3015 (year of manufacture 2006). Includes cooling system. Includes filter system. Includes 5-inch and 7.5-inch cutting heads. Includes accessories such as lenses, nozzles, etc. Csdpsyxcvfsfx Adpsrc We have two laser machines that we need to decommission by the end of July 2026. The price is symbolic and can be significantly reduced if the buyer assumes the decommissioning costs.

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER SOURCE SOURCE: ROFIN DC 030 ; 3000 W WEIGHT: 570 Kg Crsdpfx Adjy R E Unepec

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz Crjdpfx Adsg Ev T Eopjc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. Csdpfxsg Iwype Adperc 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm Cedpfxjytkdlo Adporc SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 12 h, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 12 h, laser power: 1,000 W, sheet thickness (max.): 2 mm, Equipment: cooling unit, documentation/manual, Almost new Fanuci welding machine, 1000 W. Everything is in good working order. Used for approximately 20 hours. Includes a wire feeding mechanism. The production processes changed, and the machine is no longer needed. Codpfxsy T I Dks Adpsrc

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 16 mm, overall weight: 4,500 kg, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, warranty duration: 60 months, Bodor P-Series Sheet Metal Laser Cutting Machine – High-Precision Laser Technology for Maximum Efficiency Credpfx Asv S Elqjdpec Bodor's P-Series sheet metal laser cutting machines represent state-of-the-art laser technology, high levels of automation, and maximum safety. Designed for demanding cutting processes, the P-Series combines innovative features with outstanding performance to increase efficiency and productivity in sheet metal processing. The Bodor P-Series sets new standards in sheet metal processing. With sophisticated automation features, intelligent safety mechanisms, and precise cutting technologies, it offers a first-class solution for companies that value quality, efficiency, and productivity. Contact us for more information or a demonstration of this innovative laser cutting machine! Laser Type: Fiber Laser Positioning Accuracy: +/- 0.05 mm Repeat Accuracy: +/- 0.03 mm Warranty Period: 5 Years Safety Light Barrier: Yes Documentation: Yes Cooling Unit: Yes Extraction System: Yes

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, total length: 5,560 mm, total width: 2,270 mm, total height: 2,520 mm, warranty duration: 60 months, The i-Series from Bodor Laser offers compact fiber laser metal cutting machines with a fully enclosed safety design, ensuring maximum safety and efficiency. Thanks to their small footprint, they are ideal for operations with limited space. The enclosed housing protects the operator from laser radiation and reduces emissions, contributing to a safe working environment. With advanced laser technology, the i-Series machines enable precise and fast cutting of various metal materials. They are the optimal solution for companies seeking space-saving, safe, and powerful cutting technology. Fiber laser: Working area: 3048 mm x 1524 mm Max. workpiece weight: 1000 kg Max. acceleration: 1.5 g Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.03 mm Crjdev S Ewyepfx Adpsc Warranty period: 5 years Safety light barrier: Yes Documentation: Yes Cooling unit: Yes Extraction system: Yes

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 18 mm, overall weight: 6,000 kg, total length: 12,900 mm, total width: 2,370 mm, total height: 2,650 mm, The T-Series from Bodor Laser offers state-of-the-art tube laser cutting machines designed for precise and efficient processing of a wide variety of tube types and sizes. Equipped with extensive features, these machines can handle virtually all tube processing requirements and enable high productivity while maintaining excellent cut quality. The T-Series is therefore the ideal solution for companies looking for reliable and powerful tube cutting technology. Max. diameter of round tube: 8-230mm Max. diameter of square tube: 8-230mm I-beam: 100-140mm Max. raw material length: 6500mm Positioning accuracy: +/- 0.05mm Repeatability: +/- 0.03mm Crjdpfxev S Ew He Adpsc Warranty period: 5 years Safety light barrier: Yes Documentation: Yes Cooling unit: Yes Extraction system: Yes

Year of construction: 2021, condition: ready for operation (used), Max. working area: 3048x1524mm, max. workpiece weight: 900kg, max. positioning speed: 100m/min, max. acceleration: 1.0G, positioning accuracy: 0.05mm, repeat positioning accuracy: 0.03mm, screen size: 21.5 inches, max. laser power: 4kW, max. sheet thickness carbon steel: 20mm, max. sheet thickness stainless steel: 12mm, max. sheet thickness aluminium: 10mm, max. sheet thickness brass: 6mm, laser source: MAX, laser head: Bodor Genius, software: Bodor Pro 2.0, length: 4960mm, width: 2280mm, height: 2200mm, weight: 7.5t. Equipment: heavy-duty machine bed made of spheroidal graphite cast iron, aluminium crossbeam, 4kW MAX laser source, Bodor Genius laser cutting head with autofocus, Bodor Pro control system, 21.5-inch touchscreen monitor, Yaskawa servo motors and drives from Japan, SMC oxygen control valve from Japan, SMC nitrogen control valve from Japan, active crash protection function, automatic lubrication system, Wi-Fi control, automatic pressure regulation for oxygen and nitrogen, Schneider Electric relays, automatic shutdown when the door is opened, laser fault alarm, chiller fault alarm, cutting fault alarm function, cutting gas low-pressure alarm function, laser safety glasses for the operator, water chiller, with complete system documentation, operating manual and electrical diagrams, extraction system, spare laser head, laser source, wear parts and accessories, valid CE declaration of conformity. An on-site inspection is possible. Csdpeza E R Tefx Adporc

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Csdpjyxc Afsfx Adperc

Condition: used, functionality: fully functional, Year of construction: 2011, laser type: CO₂ laser, laser power: 4,400 W, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, We offer this used Bystronic Bylaser 4400 laser cutting machine, manufactured in 2011. Model: Bylaser 4400 Year of manufacture: 2011 Laser medium: CO₂ Max. power cw: 4400 Csdpfx Adszbuayjperc The machine is connected and can be put into operation for a demonstration. The filter system and cooler, including the piping, are offered with the machine. The machine and auxiliary units have been regularly serviced by Bystronic. If you have any questions or require further information, please send us a message or call us.

Condition: used, laser type: CO₂ laser, laser source model: Laser Coherent CO2, workpiece weight (max.): 100 kg, - Laser Tube LT8 year 2009 - Machine hours: 80.000 - Automatic profile loader with 8500 mm, bundle management system. Rear installation side - Manual loader for single bar length 8500 mm. Front installation side - Automatic support/unloader for cut parts with a maximum length of 8500 mm, max. unloading length 8500 mm. - Metal conveyor with evacuation on the back for waste up to 350 mm. - Evacuator for cut pieces with max. length = 500 mm. - Piece collection bench on the front side - 3D head integration with inclination from + 45° to - 45° - 7.5" Lens and Lens Holder - 5" Lens and Lens Holder - Active Piercing LT8: device for controlling and optimizing the piercing process - Optical weld seam detection device - CO2 Rofin Sinar DC035 - 3500 Watt laser source - Closed circuit chiller for laser source Rofin DC 030-035 - Smoke extractor - USB key for Artube software - CAD – CAM Artube [first license] Codpfx Asza S Ifedpjrc - IGES / STEP Artube import module [first license]. - Artube Post Processor for LT8 [first license] - Artube Service Contract [one year] - Remote assistance equipment for VPN Internet connection.

Condition: new, functionality: fully functional, Year of construction: 2020, useful working area: 3000x1500 mm Crjdpfxjy It Tte Adpjc laser head: klinge or precitec (option) X/Y return accuracy: 0.05mm/1000mm table capacity: maximum 800 kg max. speed: 120m/min max. acceleration: 1.5G cutting gas requirement: Oxygen and nitrogen Fiber laser: IPG 2500W metal cutting: steel, stainless steel, stainless steel coated steel, galvanized steel and aluminum (in case of 1kW) weight: 7500 kg exchangeable table surface: yes (2 tables, automatic table changer) cover: yes.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2025/1, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 36 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing metal, stone, and concrete surfaces. Delivery is available within Germany and Austria. As a service provider specializing in surface processing, we can offer you machines tailored to your requirements! Transport costs: Depend on your location and delivery terms Delivery: 4 weeks (working days) after receipt of payment via air freight - Air freight duration: approx. 2 weeks The equipment is NEW and is configured and set up according to customer specifications! Configuration and pricing depend on the customer's requirements and application area. We offer professional training in the operation of the equipment in compliance with UAVA/UVV regulations in both Austria and Germany. As we are a service provider with hands-on experience using our equipment, we can guarantee their functionality. We provide comprehensive on-site instruction, workshop-based training, or customer-specific demonstrations. Payment options: RENTING / LEASING / PURCHASE Technical specifications: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser wavelength: 1064nm or 1080nm±5 Frequency: 10–50KHz Air or water cooling Net weight: approx. 170kg Dimensions: 98 × 122 × 143 cm Scan width: 5–50 cm Functions: Handheld or automatic Operating temperature: 0–40°C Operating mode: CW Wavelength (nm): 1025–1070 Standard output power: 15KW Laser beam quality (mm*mrad): 4 Adjustable frequency (Hz): 400 to 50,000 Transmission fiber diameter: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature (°C): 5~35 GUARANTEED at the best price! – RENTING / LEASING / PURCHASE All devices are individually assembled and delivered according to your requirements and our experience. – Product demonstration – 24-hour support – Includes maintenance, service & repair We also provide: INDIVIDUAL training in accordance with the UAVA / UVV safety regulations for commissioning laser machines for surface processing. Crsdpetxlyrefx Adpec Comprehensive safety consulting regarding the use of laser equipment in compliance with occupational and safety regulations. Routine inspections in accordance with applicable safety standards.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Puls 300, control type: manual, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 300 W, laser wavelength: 1,064 nm, power: 5 kW (6.80 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: DC, type of cooling: air, overall weight: 64 kg, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, !! New Series 2026 !! Pulse Laser Cleaning Machine 100W to 1000W - Cleaning and processing of metal / wood / stone and other materials - 300W 1-10mj Air cooled €22,650 - 500W 15mj Air cooled €32,000 - 500W 15mj Water cooled €42,000 Credpfx Asufgnhsdpjc - 1000W 20mj Water cooled €64,000 The machines are BRAND NEW and configured and set up according to customer requirements! The configuration and price depend on the customer’s specifications and application area and are programmed with our proprietary software! We provide professional training for operating the equipment in accordance with UAVA / UVV standards in Austria and Germany. As we are service providers and work with these machines on a daily basis, we can guarantee their functionality. We offer comprehensive on-site introductions or workshops at our premises, as well as customer-oriented demonstrations in Germany & Austria.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Cjdpehv U Tqjfx Adporc Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, functionality: fully functional, Year of construction: 2005, We have a variety of cooling units and extraction systems in stock for TRUMPF laser cutting machines! Are you experiencing problems with your cooling unit or extraction system? Then please contact us! We have cooling units in stock for all common CO2 lasers, regardless of whether they are 3.2 kW, 4 kW, 5 kW, or 6 kW. We also have extraction systems in stock for all common CO2 lasers, regardless of whether they are for L 2530, L 3030, L 4030, L 3050, L 4050, etc. Credpfx Adewww Dnjpsc We also stock all other spare parts, such as driver stages, MECOS magnetic bearing electronics, Dias Plus PC, TASC, Lanny valves, Siemens Sinumerik components, NCU, E/R module, and many more!

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine designed for precise sheet metal processing. The MTP F-6000 combines a robust machine structure with high-quality components, ensuring excellent cutting quality, high working speed, and long service life. The machine is equipped with a 6000W laser source, an auto-focus cutting head, and a CNC control system. It is ideal for production plants, metal processing companies, and industrial workshops. The heat-treated frame structure ensures resistance to deformation and long-term precision. Key features: 6000W laser source Auto-focus cutting head CNC control system Linear guides Helical rack drive Rigid machine construction Automatic lubrication system Water cooling system Protective enclosure Advantages: High efficiency and cutting speed Excellent edge quality Low operating costs Easy operation Reliable continuous operation Applications: Steel structures production Sheet metal processing Automotive industry HVAC and ventilation Production of enclosures and metal parts Technical data: Model: MTP F-6000 Working area: 3000 × 1500 mm Laser power: 6000 W Cutting head: Auto Focus Control system: CNC Drive: Servo drives Guides: Linear Transmission: Helical rack Cooling: Water cooling system Lubrication: Automatic Construction: Welded, heat-treated frame Cutting capacity (6000W): Mild steel: up to approx. 25 mm Stainless steel: up to approx. 16 mm Aluminium: up to approx. 14 mm Standard equipment: Crsdsyv Dx Aspfx Adpsc 6000W laser source Auto-focus cutting head CNC control system Chiller Extraction system Working table Protective enclosure Optional equipment: Air compressor Dust extraction system Exchange table

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Cjdpfxod N Rfds Adpsrc Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Make: DURMA Type: HD-FS 3015 Fiber Working range X-Y-Z: 3100x1550x125 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 15 h Sheet thickness mild steel: 12 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 6 mm Sheet thickness brass: 6 mm Sheet thickness copper: 3 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 141 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area standard L/W/H: approx. 10000x7000x2300 mm Weight: approx. 13700 kg Crodpfx Adedx Ewgjpoc Standard equipment Manual single table Sinumerik 840D control system Manually focusing Precitec Procutter F125 focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Chip conveyor Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting either Metalix or Lantek Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 2000 Watt including cooler Filter, compact dedusting Vanterm Automatic shuttle table Automatic laser head positioning Cloud license Air conditioning in the control cabinet The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration at our Staufenberg site. We will be happy to send you further information on request.