Used Tyre Press for sale (18,297)

Condition: excellent (used), Year of construction: 1979, power: 38 kW (51.67 HP), stroke length: 400 mm, table width: 1,320 mm, table length: 1,000 mm, total height: 6,300 mm, distance between stands: 1,000 mm, ram adjustment: 200 mm, Trimming press ERFURT type PKZ 400/1000 Capacity, ton 400 Stroke 400 mm Table size (left to right) 1000 mm Table size (front to back) 1320 mm Ram (left to right) 800 mm Ram (front to back) 1060 mm Ram adjustment 200 mm Strokes 18 min-1 Shut height 685 mm Upper ejector: power 20 t, stroke 125 mm Duedjlnlpxjpfx Am Tjw Driving power 32 kW Driving power overall 38 kW Required space 2550 x 2700 mm Height of machine above floor 6300 mm Weight without bottom ejector 33,8 t Total weight 38,5 t

Condition: used, Year of construction: 1990, EBU 160t TYPE HK160F PRESSURE: 160t Duodpfxjzktzys Am Tsw UP TABLE DIMENSIONS: 1000x500mm DOWN TABLE DIMENSIONS: 1200x800mm STROKES PER MINUTE: 80 STROKE LENGTH: 20-200mm DAYLIGHT: 600mm POWER: 15kw WEIGHT: 17,500 kg THE MACHINE IS IN EXCELLENT CONDITION AND READY FOR LOADING.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, • Suitable for pressing veneer, fire-resistant panels, decorative paper, etc. • Suitable for laminating furniture panels, partition walls, wooden doors, or for laminating all kinds of decorative materials onto composite boards. • The press can also be used for drying or smoothing veneer. Pressing force 100 tons Dimensions of heating plate 3000 × 1300 × 42 mm Dujdpfx Amozhv Sve Tow Number of working layers 1 layer Number of heating plates 2 pcs. Distance between heating plates 200 mm Surface roughness of heating plate Ra ≤ 1.6a (2.5 μm) Cylinder diameter Ø 85 mm, material: steel Number of cylinders 8 pcs. Power of hydraulic press motor 5.5 kW Heating method Heating oil Heating power 24 kW Power of circulation pump 1.5 kW Pressure per cm² 3.07 kg/cm² Maximum heating temperature 130°C Press dimensions 4200 × 1670 × 1900 mm Press weight 5300 kg

Condition: used, from a well-known manufacturing plant in Bulgaria. Dusdpfx Amjzd Rzqs Tew

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals Djdsza Rm Tepfx Am Touw ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg 2x side clamping Pneumatic control Dedpjzhv Tysfx Am Tjuw CE certified

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Manufactured by Karl Krause, Germany. Dedozhkipepfx Am Tjuw The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Duodpfxsv Sthgs Am Tsw Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Machine is in a very good condition, works with no problem at all! Feel free to come and inspect machine under power upon appointment! Djdpfx Amsim Si Rs Tjuw

Condition: used, Year of construction: 2021, controller model: 15" Touch B Panel PC, _____ Description: Year of manuf. : 2021 Control : 15" Touch B Panel PC Working length : 1530 mm Pressing force : 400 kN Technical Specifications Machine Type:Press Brake / Robotic Bending Cell Year of manufacture:November 2021 Operating hours:655 h Number of bends:18,337 Max. pressing force:400 kN Working length:1,530 mm Djdjzkxkmepfx Am Teuw Column width:1,530 mm Max. stroke:200 mm Distance between table and ram:400 mm Working height:975 mm Max. working speed:25 mm/s Machine weight Features Control:15" Touch B Panel PC (touchscreen) Angle measurement system Robot:KUKA 6-axis robot KR12R1810 / ME-30-60-60 Robot payload:12 kg Rear stop:5-axis (X1, X2, R, Z1, Z2) made of aluminum Gripper system:Combination gripper (equipped with six suction cups and a clamp) Safety system:Iris Lazersafe (bending line safety) Cell protection:Protective fence with electrically controlled access door

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Technical Data: Dujdpfjy U I Tuex Am Tew Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm Dodszizybspfx Am Teuw - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: used, Year of construction: 2009, functionality: fully functional, FOREL APG 250 A2 (2009) Gas Press Maximum dimensions: 2500 x 4500 mm Minimum dimensions: 190 x 320 mm Maximum manual opening: 69 mm Dsdpfx Ajzi Srnjm Teuw Gas flow rate: 1,500 Nl/min Compressed air: 800 Nl/min, 6 bar Power: 6 kW Thermal switch: 25 A

Condition: used, Year of construction: 1972, Used machine Year of manufacture: 1972 Equipment and technical data: - Pressing area: 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm Duodpfxjzknf Hs Am Tow - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Plate type: Aluminum / Natural - Thickness: approx. 51 mm - Connection value per heating plate: approx. 6.8 kW - Heat-up time to 90° C: approx. 16 min. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2900 kg Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2017, We are offering this very well-maintained Baykal BPM 1225 x 30 press brake, year of manufacture 2017. Dsdpoy Swfhjfx Am Touw

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 1,20,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Dsdpfsubyrxex Am Tsuw Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: used, Year of construction: 1967, functionality: fully functional, overall weight: 1,20,000 kg, total height: 5,600 mm, pressing force: 315 t, air pressure: 6 bar, distance between side stands: 1,300 mm, stroke length: 180 mm, table length: 1,280 mm, table width: 800 mm, Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 3600 x 1750 x 4600 mm Dedezh Ilbopfx Am Touw Electric output 25 kW Total weight 17 000 kg

Condition: ready for operation (used), Year of construction: 1999, Heidelberg Speedmaster 52 2 Max format 37 x 52 cm Min format 10.5 x 14.5cm Max speed 15000 per hour Dedpszkfviofx Am Tjuw Max thickness - 0.03 x 0.4mm Weight 4.8 ton Dimensions - 2.9 x 1.85m New rollers Straight Autoplate Autowash Baldwing Weko

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m Duodpfxjx Uru No Am Tow

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Dodeyv Nd Dspfx Am Teuw Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: used, Year of construction: 2003, Filter area: 50 m² Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Dodpfx Amszb N T Ue Teuw Substructure with discharge screw: Briquetting press Schuko C 800 - 2 with extinguishing device Motor: 1.5 kW Weight: approx. 1200 kg Storage location: Supplier

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones Dusdpfxezh H Ege Am Tow – Gluing length of 2500 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm Dsdpfx Amsyx Iido Teuw table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, working width 1.250 mm working length 2.200 mm Daylight opening ~ 350 mm Joos HP 80 hydraulic veneer press for gluing veneers, wood, beams, or other pressing tasks, equipped with electric heating plates. Dujdpfxjzkvzvs Am Tjw

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm stroke 310 mm weight of the machine ca. 3500 t Duodpfx Aoxvdr Hom Tew