Used Ultrasonic Cleaning System for sale (6,142)

Condition: new, Year of construction: 2026, Metalclean P80 spray cleaning system in stainless steel. Single-tank spray cleaning system with rotating basket. Usable dimensions: D = 780 mm, H = 430 mm Load capacity per batch: 100 kg Tank volume: 130 liters Spray pressure: 3 bar Gbedoir Apvopfx Ah Hsg Operating voltage: 3 x 400 V/N/PE 50 Hz Oil skimmer

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, Used REK cleaning system Very lightly used Full vacuum technology Gbjdpfovyp D Tsx Ah Hsg 12 kW distiller with hot discharge technology, Basket size 530x320x200 mm The system has been technically inspected by us for functionality. We can provide training, commissioning, service work, and spare parts at short notice. We have over 25 years of experience with REK systems System dimensions: 2700x2500x2600 mm

Year of construction: 2000, condition: used, functionality: fully functional, machine/vehicle number: 200158, We offer this used MTM RWST 650 cleaning system, year of manufacture 2000. Manufacturer: Meißner Technik Müllenbach GmbH Machine type: RWST 650 Machine no.: 200158 Circuit diagram no.: 200158 Piping diagram: HR.9000:00 Year of manufacture: 2000 Operating voltage: 3/PEN 400 V Frequency: 50 Hz Control voltage: 24 VDC Total connected load: 100 kVA Rated machine current: 153 A Main fuse in supply line: Slow-blow rated current: 200 A Gbjdpfx Asx Sx S Aeh Heg If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2008, condition: used, functionality: fully functional, We offer this used Schunk Sonosystems GmbH SWR 20 ultrasonic welding machine, year of manufacture 2008. Mains voltage: 3 × 400 V Gbodjx Sdt Sjpfx Ah Heg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 937 h, General Data Measurements width 1530 mm Measurements depth 775 mm Measurements height 2253 mm Machine weight 1800 kg Control Unit Brand Siemens Model Sinumeric 840D Main Drive Spindle speed range 40000 rpm Number of axis 5 Movement X-Axis Movement 120 mm X-Axis Rapid Traverse 10 m/min X-Axis Accuracy P10 μm Y-Axis Movement 120 mm Y-Axis Rapid Traverse 10 m/min Y-Axis Accuracy P10 μm Z-Axis Movement 200 mm Z-Axis Rapid Traverse 10 m/min Z-Axis Accuracy P10 μm Table Table load 10 kg Tools Max tool diameter 49 mm Max tool length 130 mm Type of tool holder HSK-32 Media Power consumption 25 kVA Additional Equipment Workpiece Measurement: DMG PP-400 Infrared probe Tool Measurement: RS NC-4 Coolant Conditioning Equipment: KM 10 This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with 40,000 rpm max speed, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options like a DMG PP-400 Infrared probe and RS NC-4 tool measurement. If you are looking to get high-quality milling capabilities consider the DMG ULTRASONIC 10 machine we have for sale. Contact us for more information about this machine. Gbsdpfx Ajx D Naxsh Hjg Application Types Milling

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Gsdpfx Ahsxyk Trj Hobg

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Gbsdef A D Nmepfx Ah Hjg Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Gbjdpfjt Tyqmox Ah Hjg For further information or contact options, please visit our website

Condition: good (used), trolley Gbsdpfxsb A H U Ss Ah Hsg -Simple bucket -Flat press -2x shelves for microfiber mops

Condition: used, functionality: fully functional, ShowRange SRFD2600 Digital Ultrasonic Flaw Detector Set. The rugged SRFD2600 is designed for the severe environment. Its domestically unique omniseal design enables it to resist the damp, sandstorm, dust, and pollution in all sorts of environmental extremes ranging from ocean to desert. The full screen function enables the echo wave displaying area to cover the entire screen so that the operator will have the maximal view. The solid waveform :add the waveform visual contrast and omission will hardly happen during the fast testing. The bulk memory can store up to 1000 data sets,including waveforms, curves,and parameters(including the traditional 1000 channels) Through echo wave-echo wave thickness measurement:the zero calibration can be avoided, and the net thickness of the base material can be directly measured through the coating. Wave Crest Memory: the real-time envelope can display the highest wave of the flaw and record the maximum value of the flaw to help the exact positioning and fast testing of the flaw as well as the qualitative analysis by the envelope waveform. Automatic Gain: automatically adjust the gain to the pre-set amplitude height. Warning Function: afferent echo/lost wave alarm Real-time Clock: automatically record the date and time of the stored waveform. Display Freeze: catching the waveform and the sound path data at any moment and removing the hatch after freezing to measure the echo wave parameters. Gbodpsttrc Aefx Ah Heg Flaw Positioning: real time displaying sound path S, horizontal height X, depthY, and wave height H. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50,000 m³/h, total width: 9,000 mm, total length: 2,400 mm, total height: 8,000 mm, compressed air connection: 6 bar, Equipment: documentation/manual, Self-cleaning bag filter complete with documentation and CE declaration Structure in galvanized, press-bent and bolted sheet metal with gasket Airflow: 50,000 m³/h Dimensions: approx. 9000 x 2400 x h 8000 mm Settling/pre-separation zone for coarse dust Gjdpfjx Rrrmjx Ah Hjbg Total filtration area: 512 m² Fabric filters: antistatic, 500 g Intermediate base with 5 Atex zone 22 explosion relief panels Filter cleaning system: reverse air pulses, controlled by central unit Dust discharge system: motorized screw conveyor, motorized rotary valve for continuous discharge Electrofan: 1 unit to be defined according to customer requirements Machine electrical panel: with inverter

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. The device after a comprehensive overhaul: -new hoses and seals -regenerated turbine and water pump Gsdpfx Ahsig H H Eo Hjbg - latest software version -manufacturer's warranty ASK ABOUT AVAILABLE MODELS AND PRICE!!!

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush Gjdpfxjcx R D Ho Ah Hsbg stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: used, Gun cleaning device MARX PWA 900 -used- Housing parts made of stainless steel, Gbjdpfju R Tfasx Ah Hog timer, fresh spray nozzle ----- Technical data ----- Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -for: max. 60 recordings -Hole: Ø 17 mm -Weight: 44 kg Gbjdpfxob A Rzmo Ah Hjg

Condition: new, Banner Q45UR3LIU64CQ6K Analog Q45R Remote Ultrasonic Sensor Kit, unused in original box, 100% functional Gbodpoi D T Epsfx Ah Hjg

Condition: used, engine: 1,3 kW Gsdpfx Ahjt N Akbj Hjbg mass: 37 kg working width: approx. 40 cm The Nilco BA33-33E cleaning machine is a compact, powerful scrubber dryer for the thorough cleaning of hard floors.

Condition: ready for operation (used), Year of construction: 2011, power: 29 kW (39.43 HP), 2 heated tanks of 300 liters, one tank for cleaning and the other for rinsing. oil skimmer is in the cleaning tank the machine is also equipped with suction comes with 2 stainless steel carts. Machine is working properly. the diameter of the table is 1000mm, usable height 600 mm Gbsdpstr Dn Tefx Ah Heg

Condition: ready for operation (used), Vehicles (lift trucks - loading - cleaning etc) Gbedpsx Imkrjfx Ah Hjg Still EGV 12 - 1200 kg

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 302517, Extremely powerful due to parallel running processes: Used multi-station rotary table plant In this rotary table plant, the cleaning processes run in parallel - and that and in the highest quality: - Station 1: Loading and unloading - Station 2: Cleaning with tank 1 - Station 3: Rinsing with tank 2 - Station 4: Rinsing with tank 2 - Station 5: Pre-drying with side channel blower - Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large batches. The second-hand machine was previously used in our technical center for contract cleaning. It has been operated professionally and serviced regularly. It convinces by its extensive equipment. A plus point for you is the fast availability. If you have any questions about the equipment, the performance or the delivery time, please contact us. General information Gedpfx Aokvncvoh Hebg Year of manufacture: 2021 Condition: Very well preserved Fields of application: Cleaning of series and large series Available from: immediately Price: gladly on request Please note: Offer subject to change, subject to prior sale Facts about the machine - Footprint: 3,000 mm x 5,000 mm x 4,900 mm - Fabric window: 450 mm x 300 mm x 150 mm - Doors of the stations equipped with safety glass - this facilitates process observation - Cleaning cycles of less than 30 seconds can be realized - Fabric window also for large parts - Very robust and precise design of the system. This makes it possible to target critical areas without any problems - Vacuum drying - perfect drying even for complex part requirements - Collecting tray according to WHG regulations - Electrical pump-off device for fast bath changeover - Tank heating electrically - Process pump in tank 1 and 2 - Automatic cleaning agent dosing - Double filtration to increase service life - Insulation of piping and filter for even more safety and energy efficiency - Steam vapor condenser for vapor removal - Oil compartment with Aqua Skimm oil separator for longer bath service life - Contact water meter for recording the VE/city water consumption - Signal lamp three colors - Siemens control system - Electrical connection data: 230/400, VAC 50Hz Do you have any questions? Oliver Schmidts is looking forward to hearing from you! If you are interested, please tell us your e-mail address so that we can send you an offer. Our AGB's apply, see website.

Year of construction: 2014, condition: excellent (used), Kohlhoff Cleancontrol SL-S/D Hygiene Station/Gate Manufacturer: Kohlhoff Model: Cleancontrol SL-S/D Machine number: 807705-10 Year of manufacture: 05/2014 Gbodpfxsx I Nvks Ah Heg Power supply: 400 V, 3 phase Power: 1.2 kW Brush length: 1100 mm Overall dimensions: 2100 × 1800 × 1800 mm Equipment: - Hygiene gate with turnstile - Sole cleaner - Hand disinfection unit The Kohlhoff Cleancontrol SL-S/D hygiene station is a comprehensive solution for personnel hygiene control in food processing facilities. The device combines sole cleaning, hand disinfection, and access control via a turnstile, effectively preventing contaminants from being carried into production areas. Its robust construction and fully automatic hygiene process ensure high cleaning and disinfection efficiency as well as easy, intuitive operation. The station is designed for intensive use in meat processing plants, food production facilities, and other environments with strict hygiene requirements.

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Gbsdpfjwhu Hhox Ah Hjg Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Gedpfx Ahjwh R Tko Hobg Corner centering from the outside of the window Profile programming is based on a graphical interface after entering profile drawings in graphic format Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 Gbedpfxswrpxto Ah Hsg The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp.

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Gsdpfx Ahjwrpwie Hjbg The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.