Used Universal Lathe for sale (8,687)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 8,000 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90A1/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 8000 mm Kjdpfx Afoyi U Rbsdjnb - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - installed inverter for slow-start - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Knjdoza E Sqjpfx Afdob

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 Ksdpfxswk Iq Eo Afdonb - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), - Maximum turning diameter over bed: 500 mm. - Maximum turning diameter over gap/bridge: 580 mm. - Turning length between centers: 1500 mm. Knsdpfx Afsygy Dujdjb - Spindle bore: 71 mm. - Spindle speed range: 14–1800 rpm (22 speed steps). - Main motor power: 11 kW. - Machine weight: approx. 3,000 kg. - Equipped with rapid feeds (0.55 kW motor) - Tailstock with Morse taper 5.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 Knsdpfx Ajv Ab Dqefdob - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Turning diameter ----- 460 mm Main spindle bore ----- 58 mm Kjdpfx Ajga Tv Esfdenb Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 2220 kg INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool blocks * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Stationary and follow rest * LED work light and coolant system * Electric brake * Foot brake * Box with various tools

Condition: new, Year of construction: 2026, CORMAK 410 × 1000 Universal Lathe is a conventional metalworking machine designed for precise and efficient machining in industrial facilities, machine shops, and maintenance workshops. Built with high-quality components and advanced engineering solutions, this lathe delivers exceptional reliability, repeatability, and versatility for continuous production applications. Key Features Versatile machining capabilities – suitable for external and internal turning, taper turning, metric, imperial, module, and DP threading, drilling, and boring operations. 3-axis Digital Readout (DRO) with optical scales provides precise positioning and full control of the longitudinal, cross, and top slide movements. 250 mm hardened and precision-ground cast iron bed ensures excellent rigidity, vibration damping, long service life, and machining accuracy. 52 mm spindle bore with a reinforced bearing system provides stable operation when machining larger workpieces. Direct spindle speed and feed selection from an ergonomic control panel enables quick setup and intuitive operation. Wide threading range without changing change gears – supports 42 metric and imperial thread pitches, 18 module pitches, and 21 diametral pitch (DP) threads. Removable gap bed allows machining of workpieces up to Ø580 mm in diameter. Construction and Technology The CORMAK 410 × 1000 is built around a rigid cast iron frame with a precision-machined bed, ensuring outstanding stability, long-term accuracy, and reliable operation. The spindle features a D1-6 Camlock spindle nose with an MT6 spindle taper, providing excellent concentricity and high load capacity. The headstock transmission offers 16 spindle speed ranges (45–1800 RPM), allowing optimal cutting conditions for a wide variety of materials and machining applications. Kjdpfsiz Tf Ssx Afdsnb Technical Specifications Specification Value 3-jaw chuck 200 mm Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap 580 mm Distance between centers 1000 mm Center height 205 mm Top slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 750 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 Camlock Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges (45–1800 RPM) Metric thread range 42 pitches, 0.2–14 mm Imperial thread range 42 pitches, 2–72 TPI Module thread range 18 pitches, 0.3–3.5 MP Diametral Pitch (DP) threads 21 pitches, 8–44 DP Longitudinal feed rates 17 feeds, 0.05–1.7 mm/rev Cross feed rates 17 feeds, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power 2.2 / 3.3 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2050 × 900 × 1650 mm Net weight 1600 kg Standard Equipment 3-axis Digital Readout (DRO) with optical scales 200 mm 3-jaw chuck with internal and external jaws 250 mm 4-jaw chuck 350 mm faceplate Fixed steady rest Follow rest MT4 dead center MT6/MT4 spindle reduction sleeve Complete set of change gears Coolant system Work light Oil can Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Six vibration isolation mounts

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Knjdoytpy Sepfx Afdsb Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 410 mm, turning length: 100 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,320 mm, bed width: 250 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, overall weight: 1,550 kg, Technical data Turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in gap: 580 mm Turning length in gap: 190 mm Distance between centers: 1000 / 1500 / 2000 mm Bed: induction hardened Bed width: 250 mm Spindle bore: 52 mm Spindle nose: D1-6 Spindle taper: Morse taper No. 6 Spindle speed range: (16) 45 – 1800 rpm Maximum tool size: 20 x 20 mm Kedsytnznjpfx Afdjnb Longitudinal feed range: (17) 0.05 – 1.7 mm/rev Cross feed range: (17) 0.025 – 0.85 mm/rev Metric threads: (42) 0.2 – 14 mm Inch threads: (45) 2 – 72 T.P.I Module threads: 0.3 – 3.5 M.P. Diametral pitch threads: 8 – 44 D.P. Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Digital readout: 3-axis DRO Coolant pump power: 0.1 kW Overall dimensions (L x W x H): 1940 x 850 x 1320 mm Motor power: 3.3 kW Weight: 1550 kg Equipment 3-jaw chuck 200 mm 4-jaw chuck 250 mm Faceplate 250 mm Driving plate 350 mm Steady rest Follow rest Spindle reduction sleeve Dead center Coolant system Halogen work light Thread dial indicator Tool kit Sales conditions The machine is brand new. 12-month warranty Warranty service Post-warranty service Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Kodpeip D Rhofx Afdjnb

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Knsdpfx Asd Eaa Eofdeb Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Maximum turning height: 230 mm Maximum turning length: 1000 mm Turning diameter over bed: 460 mm Turning diameter without bridge: 690 mm Turning diameter over support: 285 mm Bore diameter: 58 mm Spindle mounting according to DIN 55029: 1 - 6" 12 speeds: 25 - 2000 rpm Travel – Top slide: 128 mm Travel – Cross slide: 285 mm Feed rates (longitudinal): 0.031 - 1.7 mm/rev Feed rates (transverse): 0.014 - 0.784 mm/rev Thread (metric): 0.25 – 3.5 mm Thread (inch): 2 - 112 TPI Thread (diametral): 8 - 144 D.P. Thread (module): 0.25 - 3.5 mm Motor power: 400 V / 50 Hz / 5.5 kW Tailstock: MK 4 Dimensions L x W x H: 2020 x 1080 x 1600 mm Weight: 1680 kg Accessories / Special features: • Heavy-duty lead screw and feed screw lathe with extensive standard equipment. Low vibration and smooth running. Includes a solid base and machine bed. • 3-axis digital display • 3-jaw chuck Ø 250 mm • 4-jaw chuck Ø 300 mm Kedok Dn Nwepfx Afdenb • Stationary and traveling steady rest • Multifix size B quick-change tool holder system, mounted, 5-piece • Strong and torsion-resistant construction of the machine base and bed, cast in one piece from vibration-absorbing gray cast iron. • Hardened and ground bed guide rails • Generously sized machine bed • All guides are equipped with adjustable wedge strips • Central lubrication in the bed slide • Right/left rotation switchable on the bed slide • Removable bed bridge for machining large workpieces • Adjustable tailstock for turning tapers • Guaranteed concentricity < 0.015 mm measured in the spindle nose • Enclosed feed gear, gears and shafts are hardened and ground • Clear control panel with solid selector levers for selecting speeds • Oil bath gear system with hardened and ground gear teeth • Handwheels with adjustable fine scale • Main spindle hardened and ground and running in an oil bath, as well as guided by tapered roller bearings • Longitudinal feed, switchable by means of 4 adjustable cam followers • Mechanical foot-operated spindle brake • Lead screw cover • Acceptance test report • Manufactured according to DIN 8606 toolmaker's accuracy • CE compliant Delivery time: immediate, subject to prior sale Year of manufacture: 2023 (unused showroom machine) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, CORMAK TYTAN 250x750 PRO 400V is an industrial-grade conventional lathe designed for precise, reliable, and long-lasting metalworking operations. The PRO version is powered by a three-phase 400V motor, delivering consistent power output and high torque across the entire speed range. Key Features 400V three-phase power supply – ensures stable motor performance even under heavy workloads, making it ideal for industrial applications. Lead screw – enables automatic longitudinal feed and threading in both metric and imperial standards. 135 mm hardened bed – induction-hardened and precision-ground to provide exceptional durability and accurate carriage guidance. P5-class tapered roller spindle bearings – ensure high rotational accuracy and rigidity during operation. Precision guideway adjustment – achieved through adjustable gibs with fine micrometric calibration. Enhanced operator safety – emergency stop with undervoltage release and motor thermal overload protection with status indication. Dual-feed capability – automatic longitudinal feed and manual cross feed increase machining flexibility. Construction and Technology The CORMAK TYTAN 250x750 PRO metal lathe is engineered for intensive industrial use. Its heavy-duty cast iron body effectively dampens vibrations, improving machining accuracy and surface finish. The 26.5 mm spindle bore allows machining of longer workpieces, while the MT4 spindle taper ensures compatibility with a wide range of tooling and accessories. The spindle speed can be adjusted in 6 ranges (125–2000 RPM) via a belt-driven transmission, allowing optimal cutting parameters for various materials and operations. The machine delivers excellent machining precision thanks to P5 precision bearings and high concentricity of the working components (runout tolerance ≤ 0.015 mm). The integrated lead screw enables accurate cutting of metric threads (0.2–3.5 mm) and imperial threads (8–56 TPI). An ergonomic control panel and an adjustable tailstock make the machine suitable for a wide range of turning operations, including taper turning. Standard Equipment 125 mm 3-jaw chuck with internal and external jaws Fixed steady rest Follow rest Change gears MT2 dead center Ksdpfx Asvvlxlofdjnb MT4 dead center Oil can Chip tray Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Technical Specifications Specification Value 3-jaw chuck 125 mm Maximum swing over bed 250 mm Maximum swing over cross slide 150 mm Distance between centers 750 mm Maximum workpiece length 700 mm Bed width 135 mm Spindle bore 26.5 mm Spindle taper MT4 Tool post dimensions 65 × 65 × 20 mm Maximum tool size 12 × 12 mm Top slide travel 70 mm Cross slide travel 135 mm Longitudinal travel 650 mm Spindle speed ranges 6 ranges: 125–2000 RPM Metric thread range 18 pitches (0.2–3.5 mm) Imperial thread range 21 pitches (8–56 TPI) Longitudinal feed rates 6 feeds (0.07–0.4 mm/rev) Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.5 kW, 400V Dimensions (L × W × H, without stand) 1310 × 610 × 480 mm Weight (without stand) 165 kg

Condition: new, Year of construction: 2026, The CORMAK GOLIAT 800 × 4000 (CJ6280YC/4000) Main Advantages Versatile machining capabilities – the GOLIAT 800 × 4000 enables external and internal turning, taper turning, polishing, metric, imperial, module and DP threading, drilling, and broaching operations. Heavy-duty cast iron bed construction – provides maximum vibration damping. The bed is hardened and precisely ground, ensuring excellent torsional rigidity, long service life, and machining accuracy. Central feed control system – equipped with a lead screw and feed shaft for threading and automatic longitudinal and cross feeds. 3-axis digital readout system – displays precise position values for longitudinal movement, cross slide movement, and compound slide movement using optical scales and electronic signal processing. High-quality spindle bearing system – reinforced spindle support with precision bearings ensures smooth operation and high machining stability. High machining capacity – large spindle bore of 105 mm, center distance of 4000 mm, 315 mm 3-jaw chuck, 400 mm bed width, and a powerful 7.5 kW motor provide excellent performance for large workpieces. Rapid longitudinal and cross feed system – significantly reduces machining time and improves productivity. Hardened and ground spindle gears – ensure quiet operation, durability, and reliable power transmission. Automatic feed and threading capability – the lead screw and feed shaft allow precise thread cutting and automatic feeds. Ergonomic control panel – allows easy adjustment of spindle speeds and automatic feed parameters. Threading dial indicator – enables accurate thread engagement and repeatable threading operations. Removable bed gap section – allows machining of oversized components such as discs. With the gap removed, the machine can handle workpieces with a maximum diameter of 1000 mm. Technical Specifications Maximum turning diameter over bed Ø800 mm Maximum turning diameter over cross slide Ø560 mm Maximum turning diameter in bed gap Ø1000 mm Bed gap length 225 mm Distance between centers 4000 mm Bed width 400 mm Maximum tool size 25 × 25 mm Maximum compound slide travel 140 mm Maximum cross slide travel 350 mm Spindle bore Ø105 mm Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36–1600 RPM) Longitudinal feed range 65 steps (0.063–2.52 mm/rev) Cross feed range 65 steps (0.027–1.07 mm/rev) Metric threads 22 ranges (1–14 mm) Imperial threads 25 ranges (28–2 TPI) Module threads 18 ranges (0.5–7 mm) DP threads 24 ranges (56–4 DP) Rapid longitudinal feed 4.5 m/min Rapid cross feed 1.9 m/min Tailstock quill diameter 75 mm Tailstock taper MT5 Maximum tailstock quill travel 150 mm Tailstock lateral adjustment ±15 mm Main motor power S1/S6 7.5 / 9 kW, 400 V Rapid feed motor power 250 W Coolant pump power 60 W Machine dimensions (L × W × H) 5700 × 1150 × 1800 mm Machine weight approx. 5300 kg (±2%) Standard Equipment 3-axis digital readout system Self-centering 3-jaw chuck, 315 mm Independent 4-jaw chuck, 400 mm Faceplate, 400 mm Rapid feed system Fixed steady rest Follow rest Two fixed centers MT5 Spindle reducing sleeve Knsdszp H Azspfx Afdob Coolant system Work lighting Chuck and tool post keys Complete set of service tools Operating manual CE Declaration of Conformity

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: Kjdpfxjfhk Ins Afdonb - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Center distance ----- 1500 mm Center height ----- 250 mm Swinging diameter ----- 500 mm Headstock bore ----- 80 mm Kodpfx Afjga Tz Redonb Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 KW HEAVY-DUTY DESIGN - WEIGHT 3250 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOC3, with 4 tool holders * 3-jaw chuck * 4-jaw chuck * Faceplate * Fixed and traveling steady rest * LED work light and cooling system * Box with various tools

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Knodpfxok Dpxlj Afdsb Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 5,500 mm, total width: 2,130 mm, total height: 1,550 mm, overall weight: 12,300 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 4000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg Kodsflaxvspfx Afdjnb - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 6500 mm width: 2130 mm height: 1550 mm total weight: 12300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: new, - 3-axis position indicator - magnetic and manual spindle brake - 3 jaw chuck ø 250 mm - 4 jaw chuck ø 320 mm - Z-axis stop - fixed & rotating lunettes - Multifix type B including 4 holders - faceplate ø 430 mm - lighting system - coolant system Specifications Knodovxgtispfx Afdeb - Distance between centers: 2000 mm - Swing diameter over bed: 600 mm - Swing diameter over slide: 360 mm - Swing diameter in cutout: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle taper: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 levels) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical pitch: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Cross feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock quill diameter: 65 mm - Tailstock quill mount: MK5 - Tailstock quill stroke: 120 mm - Motor power: 7.5 kW - Voltage: 400 V - Dimensions WxHxD: 3460 x 1800 x 1150 mm - Weight: 2250 kg

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 11,400 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 Knsdpsdy I I Aefx Afdsb - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 2130 mm height: 1550 mm total weight: 11400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle mount: MK 6, The PORĘBA TR-135B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Knodpokh Hbhefx Afdjb Availability: within 3,5 months, starting from the order Technical data: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20225203648, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Universal Robots UR10e – hardly used, solely for testing purposes We offer a Universal Robots UR10e in excellent condition. This cobot has only been used for testing purposes and therefore has very few operating hours. The UR10e comes with the latest available software version and is ready for immediate use. Multiple UR10e cobots in stock We currently have several UR10e cobots in stock. This allows us to offer various configurations and price levels. Are you looking for, for example: 1. a cheaper, older, or more used UR10e? 2. a newer cobot with very few operating hours? 3. or even a completely unused UR10e that has never been unpacked? Please feel free to contact us. We can also create a combined order when purchasing multiple robots. The stated price is for the individual UR10e cobot. Depending on your application, we can also supply the UR10e as a complete robotic solution. For example, we can supply the UR10e as: Welding cobot – complete welding solution with a Fronius welding power source Dedicated sanding cobot – a sanding setup specifically developed for your products and production process Automatic sanding cobot – our standard Talen Robotics automatic sanding cobot Knodpfjzudb Sox Afdjb Thanks to our experience in robotics and industrial automation, we can help you choose the right UR10e and configuration for your application. Are you looking for a specific age, condition, software version, or a particular number of cobots? Contact us – we may have exactly the right UR10e in stock for you.

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - power drive on upper compound slide - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Kjdpfxskyt Hlo Afdsnb Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 34 kg, load capacity: 10 kg, arm reach: 1,300 mm, We offer this used Universal Robots UR10e collaborative robot, manufactured in 2021. Model: UR10e Serial number: 202·5000196 Date of manufacture: January 30, 2021 Weight: 33.5 kg Kodpfjz Ap Adjx Afdenb Weight: 73.9 lbs Enclosure rating: IP54 Maximum payload: 10 kg Maximum payload: 22 lbs Maximum reach: 1300 mm Maximum reach: 51.2 inches Product type: Industrial Functional safety PL: PL d (ISO 13849-1) If you have any questions or require further information, please feel free to send us a message.

Condition: new, Center distance ----- 2000 mm Center height ----- 330 mm Turning diameter ----- 660 mm Ksdpfx Ajga T Acsfdsnb Main spindle bore ----- 105 mm Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 kW HEAVY-DUTY DESIGN - WEIGHT 4080 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOC3, with 4 tool holders * 3-jaw chuck, 325 mm * 4-jaw chuck, 400 mm * Faceplate, 630 mm * Fixed and traveling steady rest * LED work light and cooling system * Box with various tools