Universal lathe machine

Poreba TR 135B x 3000

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill Credpfx Ajyh H Iyoa Nsb - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm Crodpfx Aaeygxy Uj Nob centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 3,00,01,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request Crsdoxrnggepfx Aa Nob

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 Crodpfsu Sbkgsx Aa Nsb tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: new, Ostas 3-roller round bending machine SBM 1270 x 95 Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Features: - Asymmetrical 3-roller round bending machine with motorized drive - Hardened rolls - Motorized rear roll adjustment - Digital display - Upper roll can be swung out - Conical bending device - foot switch Credpfog Tzbhox Aa Njb Technical details: - sheet width: 1270 mm - sheet thickness: 3,0 mm - roll length: 1270 mm - Roll diameter: 95,0 mm - Smallest bending diameter: 140,0 mm - Motor power: 1,1 kW - Dimension L-B-H: 2100 x 760 x 1250 mm - weight: 470 kg

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Crodpfx Aaeg Npiwe Neb Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm Credpfxstzf N Rj Aa Nsb -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in) Cedpfx Aor Dd Avoa Njrb

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump Codpfxerqwbis Aa Nerb - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Turning diameter ----- 460 mm Passage of main spindle ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 1750 kg Crjdpfek Iug Tox Aa Nsb INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 attachments * Self-centering 3 chuck 250 mm * Independent 4 chuck 320 mm * chuck 350 mm * Fixed and moving grips * LED work light and cooling system * Electric brake (CE) * Foot brake * Box with various tools