Used Uv Curing for sale (974)

Condition: used, mileage: 3,93,247 km, power: 185 kW (251.53 HP), first registration: 06/2016, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), soot filter, tail-lift, Iveco Eurocargo 140E25 Flatbed/Drop-side/Tailgate, 2nd Hand, Demo Vehicle, Iveco, Service Booklet, New MOT (upon request) Wheelbase 5175 mm, AdBlue tank 30 L, without ADR - Equipment: Trailer coupling, 40 mm, 120kN, C-profile steel ladder frame, Standard frame overhang 17800, 17803, 17804, Exhaust tailpipe in the center, Batteries 170 Ah, Tires 285/70 R 19.5, Standard cab, Flat roof, Roof spoiler in cab color, Position of components: Standard, Generator 2160W (24V x 90A), Rear axle ratio i = 3.73, Fuel tank 200L, plastic, Air reservoir in steel, Air filter unit under cab, Air compressor 360 ccm, without engine drive, without auxiliary drive, Without auxiliary drive at the rear, Spare wheel, Spare wheel storage on the side, WITHOUT RETARDER, Design: standard, Mirror for body width 2600mm, Emission standard Euro VI 2014, OBD II, ABS, ASR and ESP, Towing and maneuvering eye in the front, Axles: Iveco carregs. stretta, Weight variant 5100/9500 kg, Emergency braking assist AEBS, without driver airbag, Seat belts: automatic, Left-hand drive for right-hand traffic, Standard, z.G.M., without protection for oil pan, Trailer coupling by Rockinger, Trailer socket 24V 15-pin, without trailer socket, Trailer version, Design: moderate climate, Armrest right on driver's seat, Mirror, electrically adjustable and heated, without bed, Battery charged, Comfort passenger seat, Twin tires, Hill start assist, On-board tool kit MS10-144, without specification, COC, General operating permit, without roof hatch, without FMS-VDI interface, Differential lock on rear axle, Compressed air connection, EC 2 EuroVI MY15, without power reduction, Digital engine control unit 1T/2F, First aid kit, Cab attachments: black, Cab rear wall without window, Luxury driver's seat, Lane departure warning system, etc. Appointments and test drives by telephone agreement. The information provided on the internet is a non-binding description. It does not constitute a guaranteed characteristic. The seller is not liable for typing and data transmission errors. Errors and prior sale are reserved. Bwjdpfjxav Dcox Aknsw

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm Bwedpfx Aksxbtvfjnow - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length Bwodpfx Aksx Hh A Honew • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: ready for operation (used), Heidenhain UVR 150 power supply unit ID 366 320-01 SN:12157097. The item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bedpfxsx Dw A Io Akneww

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm Bjdpfjyalqyox Aknsww E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,600 h, load capacity: 5,000 kg, lifting height: 20,600 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 110 kW (149.56 HP), fork length: 1,200 mm, empty load weight: 17,930 kg, total length: 6,780 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telescopic Handler Load Center: 500 Mast Type: Telescopic Transmission: Hydrostatic Speed Category: 20 km/h Bedpszchvkefx Aknjww Condition: Ready for operation and fully functional Technical Condition: Good Front Tyre Type: Pneumatic Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Condition: 80 - 100% Description: The MRT 2150 Privilege Plus is an all-terrain rotating telehandler, ideal for applications in construction and industry. This machine is a major asset for your material handling tasks. It functions as a telehandler, crane, and aerial work platform, thus combining three machines in one. Its 360° rotation capability enables you to perform various tasks without having to reposition the machine. The boom's pentagonal cross-section ensures exceptionally precise control. At the same time, it maintains lateral rigidity of the boom regardless of wear, providing added safety for you and your teams. You will soon find this powerful, precise, and versatile tool indispensable. 3rd valve, rear work lights, front work lights,

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Compressed Air: 6 bar EQUIPMENT Bjdpezy Ngdofx Aknsww RMO for roll media UV-curing inks Canon IJC357 or IJC358 Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Condition: used, mileage: 1,12,000 km, power: 103 kW (140.04 HP), first registration: 05/2009, fuel type: diesel, overall weight: 2,210 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 4,505 mm, total width: 1,794 mm, total height: 1,694 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), 1st owner. Only just over 112,000 total kilometers with service booklet (last service 02/2026 at 110,216 km at a VW dealership). Most inspections were carried out at an authorized VW service center. New TÜV (German technical inspection) valid until 10/2028. Directly from the fleet of a German aid organization. Many of the components that typically need replacing on a VW Touran have already been replaced recently: 2026: New turbocharger 2023: New timing belt 2023: New clutch and new dual-mass flywheel 2023: New front brakes and new rear brake pads The Touran was delivered in the fire department and disaster relief version. It has a STROBEL conversion as an emergency response vehicle with rear-mounted storage, drawers, and a partition grille. LED light bar on the upper part of the tailgate. Previously registered as an NEF (emergency medical response vehicle) "other type of vehicle". Bwodpjz Iuztjfx Aknow 5 seats. Equipped with a special signaling system. Off-road chassis as standard. 8 tires (including rims). Air conditioning. Auxiliary heater (already renewed). Audio system. Cruise control. ABS. ESP. Brake assist. Airbags for driver and front passenger, as well as side airbags. Central locking/remote control (2 original VW remote keys included). 2.0 liter - TDI diesel engine, Euro 4. Green environmental badge. 6-speed manual transmission. 200 km/h maximum speed according to documentation. Additional turn signal lights at the top rear. The Touran is in good condition. It was recently driven to us without any problems for almost 400 kilometers on the highway. The VW has no unusual noises and no error messages. The Touran runs very smoothly and powerfully. The regular maintenance over the years has paid off. According to the aid organization, the power supply located at the bottom left at the rear is currently not functioning. We were unable to verify this ourselves due to a lack of a suitable connection cable. Signs of use are present, but damage and accidents are not known. A suitable set of snow chains is also included in the vehicle. The currently mounted, good winter tires with the snowflake symbol are from CONTINENTAL and have a DOT code of 2022. The Touran is available immediately. This offer is only valid for businesses, freelancers of all kinds, as well as for authorities / emergency services / aid organizations of all kinds. Unfortunately, we do not sell to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net (=differential taxation according to §25a UStG. This means that no value-added tax is added to this purchase price and, at the same time, the VAT cannot be calculated separately).

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = General information Year of construction: 2014 Bwsdpfsz Sna Iex Aknjw Registration number: ON-68-FS Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Bsdozw T Duepfx Aknsww Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: used, axle configuration: 3 axles, first registration: 01/2020, color: other, Year of construction: 2020 Empty weight: 7.020 kg Bedpfjzuwkmox Aknoww Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm

Condition: excellent (used), mileage: 4,35,986 km, power: 130 kW (176.75 HP), first registration: 09/2013, fuel type: diesel, tire size: 235/75 R17.5, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,000 kg, permissible axle load (axle 2): 7,000 kg, loading space length: 7,140 mm, loading space width: 2,500 mm, loading space height: 2,530 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, tail-lift, = Additional Options and Accessories = - (Roof) spoiler - Radio/CD player - Rear view camera - Side mirrors with electric adjustment - Side door - Sun visor - Digital speedometer = Additional Information = General Information Year of construction: 2013 Cab: single License plate: 68-BDD-7 Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Axle Configuration Tire size: 235/75 R17.5 Brakes: Disc brakes Front axle: Max. axle load: 4000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Rear axle: Max. axle load: 7000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Weights Unladen weight: 7,020 kg Payload: 3,480 kg Bwjdpfx Ajzuyv Ssknew GVWR: 10,500 kg Functional Tail lift: Dhollandia Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating Bwsdpszuzfzjfx Aknow - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing Bedpfx Ajztqlzjkneww • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Condition: used, maximum load weight: 14,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2000, next inspection (TÜV): 09/2027, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, LEVEN 2-axle platform trailer * First registration: 01/2026 * BPW axles * ABS * Drum brakes * Payload 14,250 kg * Tare weight 3,750 kg * Drop-side panels, foldable on all 4 sides * Loading area length 6,800 mm * Loading area width 2,480 mm * Drop-side panels, 1,000 mm high * DuoMatic air connection * Valid inspection certificate until 08/2026 Bodpfsznft Nex Aknsww * German registration documents

Condition: used, mileage: 1,35,000 km, power: 175 kW (237.93 HP), first registration: 11/2008, fuel type: diesel, overall weight: 13,500 kg, next inspection (TÜV): 04/2027, emission class: euro5, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, parking heater, tail-lift, Atego 1324 Registration date: 11/2008 !!!! ONLY 135,000 km !!! Euro 5 MOT valid until 04/27 Auxiliary heater Automatic transmission Suspension: Air-on-air Payload 5200 kg Bär tail lift Loading dimensions: 7.3 m height, 2.3 m width, 2.45 m Unit: Thermoking TS 600 !!!! UNIT HAS ONLY 400 DIESEL RUNNING HOURS !!!!! Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian… Goran Bwjdoz Am Tyspfx Aknsw German/English/…? … Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2000 Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: Bedpfx Asz Ea E Sskneww • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Condition: used, maximum load weight: 14,590 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2007, next inspection (TÜV): 01/2027, loading space length: 7,500 mm, total length: 9,140 mm, total width: 2,440 mm, total height: 1,300 mm, Equipment: ABS, * Schmitz AFW 18 BDF trailer in absolutely top condition – fully galvanized – TÜV (technical inspection) valid until 01/2027 * Coupled at a high height with a 40 mm eye – air suspension – SAF axles – disc brakes – tires: 315 / 65 R 22.5 in top condition Bwedpfxoz Ed A Uj Aknjw * Overall length: 9,140 mm – width: 2,440 mm – height: 1,300 mm * Permissible total weight: 18,000 kg – tare weight: 3,410 kg – payload: 14,590 kg * German vehicle – German vehicle registration document – immediately available * Please arrange an appointment for inspection – vehicle comes from a clean factory fleet * Contact person: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale.

Condition: used, mileage: 2,33,123 km, power: 130 kW (176.75 HP), first registration: 07/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, ? MAN TGE 3.180 ? German vehicle ? First owner ? Timing belt replaced at 231,000 km. ? Air conditioning ? Driver's suspension seat ? 6-speed manual transmission ? 3 seats ? Electric windows ? Electric mirrors ? Payload: 1300 kg ? Tires: 90% ? Trailer hitch Bsdpfxez Efhls Aknoww ? Trailer load: 3500 kg ? Euro 6 ? TÜV (technical inspection) valid until 03/2027

Condition: used, mileage: 1,93,000 km, power: 158 kW (214.82 HP), first registration: 11/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, loading space length: 7,000 mm, Year of construction: 2019, Equipment: ABS, central locking, electronic stability program (ESP), tail-lift, RENAULT D210 BOX BODY – TAILGATE LIFTER 1 TON – NEW BODY – MANUAL TRANSMISSION – VALID TÜV INSPECTION – LEAF SPRING SUSPENSION –----VEHICLE HISTORY – GERMAN VEHICLE – VERY WELL-MAINTAINED VEHICLE / VIDEO AVAILABLE UPON REQUEST – NO LABELS – IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT – BOX BODY – NEW BODY – MANUAL TRANSMISSION – CRUISE CONTROL – ENGINE BRAKE – DIFFERENTIAL LOCK – TAILGATE LIFTER 1 TON – FRONT AXLE LEAF SPRING SUSPENSION – REAR AXLE LEAF SPRING SUSPENSION TECHNICAL DATA – MILEAGE: 193,000 KM – BODY LENGTH: 7.00 M – INTERNAL HEIGHT: 2.20 M – TIRE SIZE: 215/75 R17.5 – TIRE CONDITION: GOOD ADDITIONAL INFORMATION – VEHICLE WITHOUT LABELS – SUITABLE FOR FREIGHT FORWARDING, REMOVAL SERVICES, BEVERAGE LOGISTICS, OR GENERAL CARGO TRANSPORT – VEHICLE IMMEDIATELY AVAILABLE – VEHICLE IMMEDIATELY READY FOR USE – PERMISSIBLE TOTAL WEIGHT: 7,490 KG ----EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ – 2,000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ – 2,000€ EXPORT REGISTRATION POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). Bsdpfszg R Icsx Aknsww VEHICLE RESERVATIONS SHOULD ONLY BE MADE IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Manufacturer: Grafisk Maskinfabrik A/S, Denmark Model: GM DC330 V8-BX Designation: Converting Line Year of manufacture: 2019 Material width: 333 mm Max. speed: approx. 50 m/min Voltage: 3 x 400 V + N + PE Max. load: 32 A Frequency: 50/60 Hz CE conformity: Yes Location: Germany Availability: End of September 2026 Main configuration: • Unwinding unit, 3" core / 76 mm • Web guiding system • Flexo printing / varnishing unit • Lamination unit • Cold foil application • GEW UV curing unit • Pre-heating unit for toner / reduction of toner cracking • Semi-rotary die-cutting unit with Kocher & Beck GAP function • Approx. 25" magnetic cylinder system, usable format approx. 22" • Matrix rewinding • Back scoring Bjdpfx Akezkarrsnoww • Slitting unit with shear knives • Two rewinding shafts, 3" • Touchscreen control • Suitable for offline roll-to-roll production Additional equipment: GM Buffer • Condition: Visual condition: 8/10 Technical condition: 8/10 The machine is currently still in operation and can be inspected while running. Based on the available photos and information, the machine appears to be in good, clean, and well-maintained condition. A final technical inspection and test run are recommended before purchase.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 07/2025, loading space length: 13,450 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2008, Equipment: ABS, * KÖGEL 3-axle * Standard box semi-trailer * Second-hand (from Germany) * BPW-ECO-Plus axles * Air suspension Bedpfx Akszb T Hfjnjww * Double-deck * Roll-up rear door * Tires: 60-80% (385/65 R22.5) * Dimensions: L-13.450 W-2.480 H-2.600 mm (internal) * Color: White with lettering, chassis black * etc. Please, no emails, only phone calls! Subject to prior sale and errors! Functionality of extras not guaranteed! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, Mobile WhatsApp, Viber Over 20 years of experience in the buying and selling of commercial vehicles! - RELIABLE & FAIR - Former DAF contract partner!

Condition: used, mileage: 1,25,000 km, power: 210 kW (285.52 HP), first registration: 02/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: orange, gearing type: automatic, emission class: euro4, total length: 9,550 mm, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 22 m³, Year of construction: 2006, Equipment: ABS, air conditioning, soot filter, First owner. Valid TÜV (technical inspection) until 02/2027. Valid SP (emissions test) until 08/2027 (passed with 124,946 km, no issues). Original 125,000 total kilometers with inspection booklet, service booklet partially filled out. German municipal vehicle from a smaller local authority. Well-maintained and consistently operated with foresight. NO outstanding repairs. Refuse collection vehicle. Superstructure: GEESINK NORBA GPM III 22H25 with a capacity of 22 cubic meters. Chassis: Mercedes AXOR 2529 L 6x2. Leaf spring suspension in the front, air suspension in the rear. Wheelbase from 1st to 2nd axle = 3900 mm. 3rd axle = steering and lift axle. 6-cylinder diesel engine with 6374 cc and 290 hp. BLUETEC 4 = original factory Euro 4 compliant with AdBlue. Green environmental badge. ALLISON 6-speed automatic transmission. Shifts perfectly. Air conditioning. Radio. 3 seats. Digital tachograph. Tachograph check performed at the end of 2025. Valid until December 2027. Unladen weight: 15,670 kg. Permissible total weight: 26,000 kg. Tires 315/80R22.5, all tires are in good condition. The vehicle is in exceptionally good condition for its age. The cab is also clean. The AXOR runs smoothly and was in regular full operation until recently. Bwsdpfx Akez Aw Rvonjw Upon agreement, some suitable new spare parts will be included, such as hydraulic hoses and 1 complete, fully overhauled compression plate cylinder. The friendly workshop manager gave us these new parts on the day of collection. This offer is only valid for commercial businesses and freelancers of all kinds, as well as for authorities/emergency services of all kinds. Subject to prior sale and errors in the information provided. Net price for this beautiful AXOR refuse truck: 15,800 Euros!

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, serial number: 16412040T – complete overhaul and testing performed by qualified personnel, including test report. Comes with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Bjdpfjz A N A Isx Aknsww

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, SN: 16412040T – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In an exchange procedure, your defective exchange part must not have any mechanical damage, such as fractures, as these cannot be repaired. In this case, an additional charge of €700 including VAT will be applied. Bedpez A N A Uofx Aknoww Attention: You are bidding on a Heidenhain UVR 140D inverter, ID: 390 281-01, SN: 16412040T, in an exchange service. It has been professionally overhauled and tested, comes with a 3-month warranty, and is 100% functional. The scope of delivery is as shown in the photos. In both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €700 including VAT will be issued.