Used Uv Drier for sale (1,240)

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications Rjdpfxjxl Dbte Abhsw • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Redpexlub Dofx Abhew

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3660916, input voltage: 400 V, input current: 32 A, Hello, I am offering a fully refurbished Beltron UV dryer, which has been completely overhauled in our workshop. It is equipped with two UV lamps, each rated at 120 W/cm. The output can be infinitely adjusted thanks to modern electronic ballasts. The control system uses a Siemens display—no cheap Chinese components. Belt speed is also continuously adjustable. The conveyor belt width is approximately 42 cm, making it suitable for materials up to 40 cm wide. The current lamps have only 320 hours and 281 hours of operation since their replacement. During the workshop refurbishment, the dryer was completely repainted with 2K paint. The conveyor belt was replaced with a new one. The dryer is mounted on castors, making it mobile. It also has its own exhaust system, which only needs to be connected to a hose leading outside. Electrical connection: 400V/32A. The dryer is currently located at our warehouse/workshop near Cham in the Bavarian Forest. Inspection while operational is always possible. Shipping via freight forwarding or loading with a forklift is no problem at all. Rjdpfxoy Svq Ae Abhsw Please feel free to contact me if you have any questions.

Condition: used, UV dryer Rodpfx Abov Sauaehow Comes from ongoing production

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. Redsq T N T Tjpfx Abhjw System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: used, Manufacturer: Hanovia UV Model: PMS150G4/4 Type : Ultraviolet disinfection system Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Rodex R A Iljpfx Abhew Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Redjt Dx U Sopfx Abhjw Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 80 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20 watts of laser power Laser source with 355nm wavelength / 20 watts Exhibition machine (used/very good condition), with approximately 80 operating hours - No visible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is pre-installed and adjusted - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn it on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50 mm grid - LED work area lighting - 50 mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking arbitrarily shaped surfaces - Includes foot switch to start the engraving process The sale is exclusively to commercial customers. Delivery / consultation / sale only in Germany / Austria / Switzerland Please also note our favorable leasing/rent-to-own offers. Machine dimensions approximately: Width: 800 mm Redjflrnaopfx Abhjw Height: 1800 mm Depth: 1000 mm Weight: approximately 180 kg

Condition: new, Year of construction: 2026, operating hours: 20 h, functionality: fully functional, machine/vehicle number: RR400FS, area performance: 1,350 m²/h, overall weight: 80 kg, power: 0.3 kW (0.41 HP), battery voltage: 24 V, sweeping width: 350 mm, SCHORR Battery-Powered Scrubber-Dryer RR400FS, Single-Disc Machine With the RR400FS, you can complete wet cleaning and drying in a single pass. The 350 mm wide main brush loosens dirt and removes stubborn residues, while a metered amount of fresh water with cleaning agent is applied. Immediately behind it, the integrated vacuum system sucks up the dirty water. The RR400FS relies on robust and reliable technology without unnecessary frills. It is powered entirely by electricity via a 24V battery system with 32 Ah, which enables approximately 1.5 hours of continuous operation. It can be conveniently charged with the included charger at a standard power outlet. SCHORR Scrubber-Dryer RR400FS – Discover the advantages: ✓ Compact battery-powered scrubber-dryer for small to medium-sized hard floor areas ✓ Cleaning performance of up to 1,350 m²/h ✓ 350 mm main brush, scrubs and vacuums in one pass ✓ Floor is immediately walkable thanks to the integrated vacuum system ✓ 7-liter fresh water and 12-liter dirty water tank, designed to prevent overflow ✓ Fully electric with 24V/32Ah, up to approximately 1.5 hours continuously ✓ Charger included, charges at a standard power outlet ✓ Well-supported: directly from the manufacturer, large spare parts inventory & workshop service Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR400FS Model: Electric Scrubber-Dryer Drive: Electric (battery) Weight including battery: 80 kg Tires: PU (non-slip) Wheels, number: 2 Overall length: 900 mm Overall width: 580 mm Overall height: 700 mm Fresh water tank volume: 7 l Dirty water tank volume: 12 l Main brush diameter: 350 mm Area performance: up to 1,350 m²/h Vacuum motor power: 300 W Brush motor power: 310 W Battery voltage/capacity: 24V / 32Ah Operating time: approx. 1.5 hours Charger: Included *Further technical data is available upon request. The scrubber-dryer is designed to be user-friendly and offers an intuitive interface that is easy to understand even for inexperienced users. With its ergonomic design and flexible steering, it enables effortless navigation through narrow spaces, ensuring efficient cleaning with minimal effort. The dirty water tank holds 12 liters, more than the 7-liter fresh water tank. This ensures that no more water is ever taken up than is dispensed at the front. The tank will also not overflow, even if foam forms. Once the work is done, drain the dirty water in a controlled manner, and the compact machine can be quickly stored. Of course, we usually have all the spare parts in stock and can deliver them quickly if you should encounter any problems. If you require technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the device? No problem! We also offer attractive options for this. Just contact us, and we will advise you on the various possibilities. We look forward to your inquiry! We at SCHORR are happy to answer any questions you may have about our scrubber-dryer. You can reach our competent team by telephone or email. We look forward to hearing from you and assisting you with your consultation. Rjdpfx Abszh Hunshjw

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 Redsyifwpspfx Abhjw - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.* Redpfx Aexn Nlvsbhew

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-0400, Technical data: - Manufacturer: Venjakob - Type: H (UV) - Working width: 1,300 mm - Length: 2,500 mm - Total width: 1,510 mm Rjdpfx Asyh Hu Tobhew - Feed speed adjustable via frequency converter - Frequency converter not included in delivery - Conveyor belt suitable for ambient temperature up to approx. 120°C - Height: 900 ± 50 mm - Motor power: 0.75 kW - Motor ATEX-compliant - Belt control: pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey - Voltage fluctuations: +/-5% - Location: in stock

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm Rjdpfsx Tpx Ajx Abhjw - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches Rsdpeu S N R Eefx Abhjw on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Redpfewka Hlox Abhsw Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 Printing area: 2500 x 1300 mm High speed: Prints up to 25 m²/h or up to eight sheets/h (4C color configuration) in the format 2440 x 1220 mm and up to approximately 12.5 m²/h (4C+W color configuration) with simultaneous white printing New ink supply: The 1-liter ink bottles can be easily replaced from the front – making refills much faster! Simple operation – no alignment problems: Equipped with alignment pins and a printed ruler for precise positioning of the media on the printing table. The registration pins secure the media to prevent it from slipping. Thanks to the measuring scale, the layout and RIP data can be easily adjusted to the position. More flexibility thanks to direct printing, even on thick media: Printing on boards up to a height of 50 mm. Reduced banding streaks thanks to the Mimaki Advance Pass System. Special Mimaki circulation system prevents white ink from settling. Mimaki Clear Control (MCC): For glossy surfaces – to avoid dust adhesion and the formation of small air bubbles, the drying time of the ink and the intensity of the UV light are simultaneously reduced with MCC. This creates both glossy and stylish matte surfaces. In addition, the print can be embossed with several layers of clear varnish to achieve a multi-dimensional effect. Convenient ink selection - LH-100 hard UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% deformable and therefore suitable for various substrates - White ink for backgrounding reduces light transmission - Two-layer printing with white on clear and colored surfaces - Enhancement of prints through glossy or matte varnish finish Environmentally friendly printing: No release of harmful substances through UV printing technology. Lower power consumption and longer service life thanks to UV LED lamps. RasterLink 6 - Powerful RIP supports excellent color reproduction - Various print jobs can be easily nested together - Simple and user-friendly application - Self-explanatory icons help you find your way around quickly - Thematically related RIP settings are grouped together in one window and can be saved as favorites for recurring use - The printing process is monitored directly in the main window - The software can be updated at any time via the Internet, and profiles can be downloaded or updated. Printing process: Piezo inkjet Rsdpfx Aoy Nugqsbhjw Print head: 2 heads in staggered arrangement Max. printing format (W x L): 2500 × 1300 mm Max. media format (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with uniform weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media suction: Vacuum Number of vacuum zones: 2 sections (in the X-axis) Accuracy: Absolute ± 0.3 mm or ± 0.3% of the specified distance (whichever is greater) Repeatability: ± 0.2 mm or ± 0.1% of the specified distance

Condition: good (used), Year of construction: 2018, UV industrial super wide format digital printer for rigid media he Inca Onset X2 is a high-volume industrial UV flatbed inkjet printer designed for display graphics, POP/POS production, packaging, and specialty printing. Developed by Inca Digital Printers (later part of Agfa), the X2 is positioned as a production-class printer that combines high throughput with excellent image quality. The system is intended for medium-to-high production environments where productivity, automation, and reliability are critical. Printer is originally X3, but was converted to X2 (two channels of CMYK ) Rodpfx Aszhv T Tjbhsw Manufacturing Year: 2018 Colour configuration: 2xCMYK RIP: not included Automation: 3/4 automated Productivity: up to 124 beds/hour Status: fully operational, 45 printheads out of 224 are required to have high quality on high speed (can be quoted). In production, fully operational demo possible Decommissioning, transport and installation available upon request. For further technical details, refer to enclosed data sheet.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: FM52, warranty duration: 12 months, working width: 520 mm, compressed air connection: 6 bar, operating speed: 500 mm/s, Komfi Fullmatic 52 Coating/Varnishing machine IR & UV Curing system Capable of processing both, UV as well as Water-based varnishes and primers Compact UV coating machine for medium volume orders up to B2 sheet format Robust and reliable design using 3-roll forward roller coating system Automatic sheet feeding using Komfi-design feeding head Air knife for smooth transport of the sheet Application: photo books, magazine covers, leaflets, posters, etc. Maximum varnishing speed 30 m/min Maximum sheet format (size) 52×74 cm Minimum sheet format (size) 20×25 cm Paper substance / Grammage 115-350 g/m2 Redpfjzibfdex Abhow Type of varnish / coating UV varnish, viscosity 30-65s (DIN 4) UV lamp activation time 2 min UV lamp power input 5 kVA Machine dimensions including delivery table (L × W × H) 330×140×130 cm Air consumption during stable machine operation 300 l/min

Condition: excellent (used), Henkel UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use. The device integrates the following: a control unit with an integrated power switch and operating hour counter a lamp housing with the burner reflector igniter. Includes a UV protection box. Features: Contains a 400 W metal halide lamp Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be detached from the lamp module and operated separately Adjustable lamp height for optimal irradiation With a glass filter to prevent short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm Redpszg Expofx Abhsw Ambient and operating temperature +10 °C ... +30 °C Storage temperature -10 °C ... +60 °C Weight ~ 11.5 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 Rodpfx Aezf N Tnsbhew - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury and gallium tubes. - Tube power 80 W/cm - For mounting on an existing conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm Rjdpfezf N Rgjx Abhow - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm Rsdjzf N Nispfx Abhew 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm Rsdpozf N Hbsfx Abhew - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 Redpfx Aezf N Edsbhew - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, functionality: fully functional, Roland VersaUV LEF-12 UV-LED flatbed printer including BOFA Base Unit (extraction/filtration unit). Sold on behalf of a customer, fully functional. Printer: - Roland VersaUV LEF-12, UV-LED technology - Weight: 85 kg - Connection: 1 phase, 100–240 V, 50/60 Hz, 1.8 A - Made in Japan Base Unit (extraction): Rsdozicqzepfx Abhsw - BOFA International Ltd, model for LEF12 - Connection: 115–230 V, 50/60 Hz, 12.5 A - Date of manufacture 08/2011 Direct printing on objects, advertising technology, gadgets, packaging, and more. Location: 6112 Wattens (Tyrol). Collection only. Payment in cash upon collection or by instant bank transfer before loading/collection. Viewing by appointment. Sold on behalf of a customer.