Used Vacuum Priming Machine for sale (69,863)

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Rcsdpfx Aezwhunjbpsf Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Rjdpozwl Dmsfx Abpscf Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Rjdpfxjzwhk Nj Abpocf Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, Year of construction: 2008, Program control Air table in the center + side tables Rcjdpfozwkpusx Abpjf Light barriers Spare blades Cutting length: 780 mm Stack height: 120 mm

Condition: used, Year of construction: 2003, Milling machines Travel distance X: 415 mm Travel distance Y :340 mm Rcodpfx Aszv Sb Nebpof Travel distance Z: 355 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: HSK 40 E spindle revolutions: 42000 rpm table size X: 470 mm table size Y: 400 mm max. workpiece weight: 500 kg tool changer: 30 - time Rapid traverse: 30 m/min electronic handwheel

Year of construction: 2026, operating hours: 24 h, condition: new, functionality: fully functional, empty load weight: 6,500 kg, machine/vehicle number: AVB-68HELIX, Heavy duty and robust body type of wood shaving machine, AVB-HELIX68 wood shaving machines are one of our most popular machines with a higher industrial capacity for the market. Designed to process both logs and offcuts with a minimum material size, this machine is suitable for round log shaving and wood waste processing. It is equipped with T.C.T. carbide blades and also fitted with a hopper pressing system for small pieces and the offcuts (optional). The working principle with a planer blade and carbide blades is available. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-68HELIX Rjdeidxu Hepfx Abpocf Number of Cutterheads 6 Length of Cutter Head 80 cm Number of Blades 250 Carbide blades / cutter head Power Supply 6 *11 KW = 66 KW (88,5 HP) Hopper Working Hydraulic Hopper Dimensions 2600*800*1100 mm Working Voltage 380-415-460-480 V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 11 KW Total Power 78 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 0,6 mm Max.Log Input Length 250 cm Max.Log Input Width 10 - 75 cm Working Distance 2500 mm Machine Dimensions L5700 x H1700x W1600 mm Weight 6.500 kg Production Capacity 2000-2500 kg/h

Condition: used, Heidelberg cylinder press, standard accessories, working size 54 x 77 cm, 2 clamping frames, inking unit. Redpfxezwhaws Abpecf

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Sinker EDM machine – in excellent technical and visual condition The machine has undergone a comprehensive and professional overhaul at our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Sinker EDM machine Rcsdpeyrqpfefx Abpef OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 1

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF Rjdpezwb R Nofx Abpocf - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used Molding Machine MRT 3503 R for big container in HDPETechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing (1.000/2.000/5.000L Tanks). The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integrated into a broader production line with downstream trimming and quality checks. The generous envelope (3500 mm spherical diameter) and multiple carriages support high throughput configurations and flexible tooling strategies. I... Rsdoziyy Hepfx Abpjcf

Condition: good (used), functionality: fully functional, Mitutoyo length measuring system, model KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the draw-in device, including air conditioning unit, Center distance: 630 mm, the machine has no tailstock and was specifically used for chucking operations, Max. grinding diameter: 280 mm, Max. grinding wheel size: 400 x 40 x 127 mm (not included in the scope of supply), Grinding spindle speed: 2040 rpm, 6 speed stages of the tool spindle: 22.4 to 280 rpm, Rjdpfezv Uhrex Abpecf Drive motor: 4 kW, Accuracy / smallest division value: 0.001 mm, Taper in tailstock and tool spindle: Morse 4 Largest table longitudinal travel: 760 mm, Weight between centers: 120 kg, Total power consumption: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: corresponds to the serial number: 1989 - 1991 Swiveling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and automatic feed, Cooling system, Machine lighting, Operating manual in German and electrical diagrams.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Rcodpfxeh Ek H Ss Abpef Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 10 h, input voltage: 400 V, input frequency: 50 Hz, total width: 1,487 mm, total length: 4,440 mm, overall weight: 1,900 kg, Equipment: documentation/manual, For sale: a practically unused vertical double-spindle glass drilling machine Expoglass PRIAM, year of manufacture 2023. The machine has drilled just under 300 holes — condition as new, like factory-fresh. Fully designed and manufactured in Poland by Expoglass. This is the latest version of the machine — technically almost identical to a new unit (current price of a new machine: EUR 39,000 net). Included in the price of EUR 29,000 net: software update to the latest version inspection including calibration Rjdpfezv Dunox Abpocf optional installation at the buyer's site and operator training 6 months warranty on wear and mechanical parts Transport not included. The machine can be inspected on site at the current owner's premises. Advantages: automatic serial drilling of up to 20 holes very simple operation, minimal training time high machining precision — minimises glass cracking and chipping hole chamfering function modular design for fast servicing Technical data: Parameter Value Year of manufacture 2023 Holes drilled approx. 300 Length 4440 mm Height (operating) 2793 mm Height for transport 2100 mm Width 1487 mm Weight 1900 kg Communication 7" HMI panel + analogue buttons Spindle feed automatic, servo-stepper Feed control electronic Loading bar control electronic Spindle speed 700–2800 RPM Drill tip position measurement automatic Drill change with table lowering and spindle lock Spindle depth setting electronic (calculated by controller) Horizontal positioning double-row manual stop system Number of manual stops 6 pcs Material clamping pneumatic Hole chamfering function yes, electronically controlled Drill magazine capacity 70 drills Drill diameter measurement accuracy up to ±5 mm Glass thickness measurement accuracy up to 0.4 mm Loading bar positioning accuracy up to 0.7 mm Serial drilling yes, up to 20 holes Max. glass weight 200 kg (centred; max. 130 kg per half of the bar) Max. drilling height 1050 mm Recommended drills thin-wall "CHAMPION" L=75 mm Online remote support yes

Condition: used, Technical details: grinding length: 600 mm Rcsdperkr U Eofx Abpjf centre height: 180 mm swing dia.: 360 mm workpiece weight: 80 kg max. dia. of grinding wheel: 500 mm grinding wheel width: 80 mm grinding wheel hole diameter: 203,2 mm peripheral speed: 45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system. *

Condition: good (used), Year of construction: 1998, Deckel Maho DMU 103V Year of manufacture: 1998 Control system: - Siemens 810D (Shopmill) Main spindle: - max. 8000 rpm Travel ranges: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 - max. table load 800 kg Rcsdpfxozwg E Ee Abpsf Tool changer: - 24 magazine positions Availability: - Immediate

Condition: good (used), Iwasaki LDH 200 label printing machine, machine number 1499, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, working width: 20 cm, in good condition, available immediately. Rcsdpfxjiphiko Abpef Iwasaki LD 200 label printing machine, machine number 1174, 3 colors, die-cutting unit, various mounting plates, UV dryer, unwinder, slitter-rewinder, in good condition, available immediately, working width: 20 cm. A total of 3 machines are available (2 Iwasaki and 1 Labelmen). Working widths: 20 cm and 18 cm. If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior appointment.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Rodpfxjzu Ix Us Abpscf Total weight: 4,000 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Special price, as the machine needs to be removed by August 28th. Special Price, contact us! Redozu Nn Rjpfx Abpjcf Control system: - HEIDENHAIN iTNC530 Travel distances of linear axes: - X-axis: 2,700 mm - Y-axis: 1,000 mm (cross axis) - Z-axis: 1,050 mm Machine table: - Dimensions: 3300x1,000 mm - T-slots: 7 x 22 - Capacity: max. Axis speeds: - Max. feed rate X/Y/Z: 10,000 mm/min Milling head and spindle: - 2-axis diagonal milling head 1° x 2.5° - Max. spindle speed: 60 - 3,000 min-1 - Max. motor power: 22/30 kW - Tool holder: ISO 50 (DIN69872-B) Cooling and chip removal: - Chain conveyor in the longitudinal direction - Cooling through the spindle, 19 bar Other equipment features: - Movable control panel in front of the machine - Enclosure with front-side doors - Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center Rcjdpfx Aezld Nqsbpsf - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Note: The machine can be transported on a truck up to 3000 mm wide! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Year of construction: 2006, condition: good (used), Fully operational GOODSTRONG GMC-TC 1600 paper/cardboard roll-to-sheet cutting machine, manufactured in 2006. The machine is designed for the industrial conversion of paper and cardboard rolls into cut sheets. The system features an automatic edge-guidance mechanism that ensures precise positioning of the paper web during cutting, while the double rotary knife assembly guarantees clean and accurate edges. Rcjdpfx Aszt R Hfebpof Model: GOODSTRONG GMC-TC 1600 Year of manufacture: 2006 Roll (web) width: 400–1600 mm (16″–63″) Simultaneous cutting: Up to 4 rolls at once Paper/cardboard grammage: 40–700 g/m² Cutting length: Up to 3000 mm Maximum cutting speed: Up to 300 m/min Control: Microcomputer system, AC servo motor, touchscreen panel Automatic edge guidance web system Double rotary knife

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Rcjdpfxjyg I Nfo Abpof Swivel table: 600 x 210 mm, max. load 200 kg

Condition: good (used), Year of construction: 1988, grinding diameter 360 mm grinding length 1000 mm centre height 180 mm grinding wheel diameter 500 x203,2 x 50-100 mm Redjzu A Siepfx Abpjcf total power requirement 12 KvA weight of the machine ca. 4,7 t dimensions of the machine ca. 3,3 x2,0 x 1,8 m - Includes belt filters - Includes grinding wheels

Condition: used, Year of construction: 2004, 1 unit of metal circular sawing machine, TES 350 Rcjdezvdfyepfx Abpef with measuring system, 2 roller conveyors, length approx. 1 x 300 cm, 1 x 310 cm, tool cabinet with saw blades, self-dismantling Color: as shown in the pictures, according to the images and upon inspection Year of manufacture: 2004 Condition: used Location of the goods: Production hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only from the location in Osterburken

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm Rcodpfxezlbrvj Abpsf - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: excellent (used), Horizontal Cutter Hobart High-quality, powerful machine for processing meat and vegetables. The machine is fully functional after a complete overhaul. Included with the machine: 2 bowls, 2 knives. Capacity: 11 liters. Voltage: 380V. Redpezwm N Rsfx Abpocf