Used Vegetables for sale (729)

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Guodpfx Alev Srw Tj Aed Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Year of construction: 2026, condition: new, The pasteurization system is fully automated with an industrial control system and touchscreen operation. If the temperature of the juices to be pasteurized drops below the desired temperature, the outlet side of the machine is shut down, and the juice is directed through the bypass until the desired temperature is reached again. Filling can then resume. At the end of the cycle, the spiral pipe can be easily cleaned with a sponge ball. Our system is low-maintenance. ⚙️ Technical Information Rated capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Gujdpfx Alov Srl Rj Asd Weight: 170 kg Optional with filling equipment

Year of construction: 2026, condition: new, Manual Bag-in-Box Filler with Digital Scale • Made entirely of stainless steel, including all fittings, floats, and nuts • Steam sterilizable • Capacity: 130 l/hour per filling tube • With mechanical float valve in the reservoir • Optional pump ⚙️ Technical Information Gujdpfx Aov Srgbel Aod Capacity: up to 400 L/h Material: WNr. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With Bag-in-Box filling systems: 32 kg Optional pump

Year of construction: 2025, condition: new, Stainless steel bottle filler with 3 filling heads The bottle filler with pump is made entirely of stainless steel. The filler is equipped with heavy-duty, industrial filling heads that allow for automatic and adjustable filling height of the bottles. The system is suitable for wine, beer, oil, detergents, and more. • Made entirely of stainless steel, including all connections, floats, and nuts • Can be steam sterilized • Capacity: 130 l/hour per filling tube • With mechanical float valve in the reservoir • 3 filling heads • Optionally with pump This bottle filler is equipped with filling heads for fruit juice as standard. ⚙️ Technical information Capacity: up to 400 L/h Material: WNo. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg Gujdpfx Alov Srcij Aed With bottle filler: 28 kg

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control Godpov Srblefx Al Ajud • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg

Year of construction: 2026, condition: new, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer using the DIN 25 connection. The electrical control unit is mounted on the side for easier operation. The bottle filler and the bag-in-box filler are connected to each other via two separate valves and can be used together or separately. Bag-in-box filler: semi-automatic model IBB 200, with stainless steel induction liter counter. Filling system without gravity. Volumetric pump 1.1 KW with flexible EPDM impeller. Touch screen operation for cycle setting, parameters and cleaning. Vacuum and nitrogen injections are freely adjustable in the cycle. The built-in air compressor ensures continuous operation. Technical data: Bag in Box Guedpfx Astpxuvsl Aed Electrical requirement: 1.1 220V 50-60 Hz Suitable for: Ø 20 - 25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Collection tank capacity: 1500-1800 kg/h Dimensions: 600x820x1600 mm Weight: 120 kg Filling system without gravity Capacity of the collection tank: 45 L Capacity: 670 L/h Dimensions: 580x1800x1500mm Weight: 45 kg Take a look at our website!

Year of construction: 2026, condition: new, Automatic gravity rotation filter, with stainless steel pump for liquid, equipped with a 0.3 mm strainer, single-phase pump, level sensor and control panel. -Material: AISI 304 stainless steel -Frame: stainless steel on 4 wheels -single-phase power for the filter -Stainless steel centrifugal pump ENOS 20 -0.3 mm filter -Fill level sensor -Control panel with emergency stop switch Technical data: Power requirement: 0.52 kW, single-phase Input height: 410 mm Capacity: 1000 kg/h Dimensions: Length: 800 mm Width: 1080 mm Guodpfstpxqnjx Al Asd Height: 750 mm Weight: 70 kg Take a look at our website!

Year of construction: 2025, condition: new, These tanks are ideal for cider mills and wineries for contract pressing. They can serve multiple customers simultaneously and continuously without having to stop pressing. With the help of valve settings, you can designate the specific tank for specific customers. The juice does not mix with other juices. Depending on customer preferences, we manufacture containers in various sizes: 200 L, 500 L, 1000 L. Technical Information Guedstpxm Dopfx Al Ajd • Capacity: 300 L (3x100L) • Material: Wnr. 1.4301, AISI 304 stainless steel • With floating lid • Fill level indicator Dimensions: • Length: 1250mm • Width: 508mm • Height: 350mm • Diameter: 398mm • Overall height: 1100mm • Tank height without legs: 850mm • Leg height: 250mm • Weight: 60kg The dimensions apply to one container!

Year of construction: 2026, condition: new, Suitable for emptying containers of tuber vegetables and fruit. Godpfsv Sq Tyjx Al Ajud Technical Information • Output: 25 cycles per hour • Load capacity: max. 1,000 kg per container • Power consumption: 2.2 kW, 230 V, 10 A • Container dimensions: 1,200×1,200×1,000 mm • Stainless steel Dimensions: Length: 2,060 mm Width: 1600 mm Height: 1505 mm Weight: 415 kg

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry Gjdpfx Aowcl Ulol Asud • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: new, Year of construction: 2026, The fruit washer for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. Initially, the fruits are immersed in water for thorough pre-cleaning. Afterwards, they are transported further via the conveyor belt and carefully cleaned with fresh water. Technical Information • Capacity: 1000 kg/h • Power requirement: 0.75 kW, 230 V, 6 A • Material: WNr. 1.4301, AISI 304 stainless steel • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • High-quality workmanship • Equipped with rollable wheels • Low maintenance requirements Dimensions: Godpfxsv Srp Aj Al Aeud Length: 2915 mm Width: 840 mm Height: 2270 mm

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge Guedjv Sq S Nspfx Al Asd

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Gjdpfov Sq Nbsx Al Asud Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Gujdpfov Srguex Al Ajd Height: 2270 mm Weight: 150 kg

Year of construction: 2026, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Gusdpev Sq Rxofx Al Asd Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Godeurf I Uepfx Al Asud Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 8,500 Euro + VAT, negotiable, FCA: Oradea/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Godpfx Aexg Tfqel Aoud

Condition: used, Sormac PO-30 Pepper Decoring, Slicing & Wedging Line Complete Sormac pepper processing line equipped with 4 × Sormac PO-30 pepper coring machines for the automatic coring and processing of bell peppers. This high-performance processing line is designed to deliver high throughput and consistent product quality for the fresh produce and food processing industries. The PO-30 coring machines accurately remove the core and seed membranes, while an integrated vacuum system efficiently extracts seeds and seed residues, ensuring a clean finished product with minimal product loss. The line is equipped with infeed and outfeed conveyors, providing a continuous and efficient product flow. It is suitable for processing red, yellow, green, and orange bell peppers, making it ideal for the production of fresh-cut vegetables, vegetable mixes, meal components, and convenience foods. Thanks to its stainless steel construction, the installation is hygienic, durable, and easy to clean, making it perfectly suited for modern food processing facilities. This used Sormac processing line is an excellent solution for companies looking to increase production capacity or automate their bell pepper processing. The combination of four PO-30 coring machines provides high processing speeds, reliable performance, and an efficient production process. The line is currently disassembled. The line consists of: Infeed conveyor with cleats – dimensions (W × L): 600 × 3,500 mm Distribution conveyor with 4 pneumatic diverter valves – dimensions (W × L): 600 × 9,250 mm 4 × Sormac PO-30 coring machines Finished product outfeed conveyor – dimensions (W × L): 600 × 10,500 mm 4 × vacuum units with waste discharge conveyor – dimensions (W × L): 400 × 9,000 mm Central electrical control cabinet Operating principle of the PO-30 coring machine Station 1: The pepper stem is cut off. Station 2: The pepper is cored, and the seeds are removed. Station 3 (optional): The top, the bottom, or both ends of the pepper are cut off simultaneously. Station 4 (optional): The pepper is segmented into 4 pieces. After machine modification, segmentation into 2, 3, 6, or 16 pieces is also possible. Gujdezkb Twjpfx Al Ajd Technical Specifications Production capacity: Up to 11,200 peppers/hour (depending on product, quality, and operator) Product diameter: 60–115 mm Product length: 70–140 mm Functions: Coring, cutting, segmenting Power supply: 400 V (3 + N, 50 Hz) Power consumption: 6 kW Year of manufacture: 2020 Compressed air requirement: 6 bar (1,600 L/min) Overall dimensions (W × D × H): 15,000 × 4,000 × 3,000 mm

Condition: used, Kolbe MWE 52 Mixer Grinder The Kolbe MWE 52 mixer grinder is ideally suited for processing medium to large quantities of both fresh and frozen products, including meat, poultry, fish, vegetables, fruit, and other food products. Gjdpfx Ajzi Tiuel Asud This versatile grinder is widely used across various sectors, including the bakery, butcher shop, convenience food, snack food, salad, cheese, vegetable, fruit, processed meat, fish, vegan, vegetarian, baby food, and pet food industries. The integrated mixing arm ensures a homogeneous distribution of the product inside the hopper, providing consistent feeding and optimal grinding performance. The mixer grinder is fully constructed from stainless steel, meeting high standards of hygiene and durability. Technical Specifications Production capacity: Up to 2,000 kg/hour (depending on product type, cutting size, temperature, and feed rate) Hopper capacity: 120 L Grinding plate diameter: 130 mm Cutting system: Enterprise Loading height: 1,110 mm Discharge height: 490 mm Power supply: 400 V (3 + N, 50 Hz) Power consumption: 6.6 kW Weight: 418 kg Dimensions (W × D × H): 800 × 1,280 × 1,330 mm

Year of construction: 2026, condition: new, functionality: fully functional, New vertical pressure leaf filter body Manufacturer: Juneng Model: NYB-20 Filter Area: 20 m² Cake Volume: approx. 400 L Capacity: approx. 4–6 t/h for crude / vegetable oil Working Pressure: 0.1–0.4 MPa, max. 0.5 MPa Shell Temperature: ≤150 °C Machine Volume: approx. 1,680 L Weight: approx. 1,700 kg Shell Diameter: approx. 1,100 mm Plate Spacing: 70 mm Inlet / Outlet: DN50 inlet/outlet, DN40 overflow, approx. DN400 discharge Material: carbon steel as standard Stainless steel version available on request at additional cost Important note: This offer is for the filter body only. PLC automation, automatic valve skid and installation are not included. Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – suitable for crude oil clarification and fine filtration Low maintenance – long service life of filter plates Simple cake discharge – vibration / discharge system depending on configuration Can be steam jacketed – optional heating for waxy oils Filter aid compatible – suitable for bleaching earth, activated carbon or diatomaceous earth Compact vertical design – high filtration area with limited floor space Godpfxjzggc Nj Al Aeud Typical Applications: Crude vegetable oil clarification after settling Bleaching earth filtration after bleaching tank Post-degumming or post-neutralization polishing Filtration of rapeseed oil, sunflower oil, soybean oil and other vegetable oils Technical oil, biodiesel and oleochemical filtration Food, biodiesel and cosmetic-grade oil prefiltration Suitable for oil mills, edible oil processing plants, biodiesel producers, oleochemical plants and industrial liquid-solid separation applications. Neuer vertikaler Druckblattfilter / Pressure Leaf Filter Hersteller: Juneng Modell: NYB-20 Filterfläche: 20 m² Filterkuchenvolumen: ca. 400 L Kapazität: ca. 4–6 t/h für Rohöl / Pflanzenöl Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa Arbeitstemperatur: ≤150 °C Behältervolumen: ca. 1.680 L Gewicht: ca. 1.700 kg Behälterdurchmesser: ca. 1.100 mm Plattenabstand: 70 mm Ein-/Auslauf: DN50 Ein-/Auslauf, DN40 Überlauf, ca. DN400 Austrag Material: Standardausführung in Kohlenstoffstahl Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Wichtiger Hinweis: Angeboten wird nur der Filterkörper. PLC-Automatisierung, automatischer Ventilstand und Installation sind nicht im Lieferumfang enthalten. Hauptmerkmale: Hermetisch geschlossene vertikale Bauweise – kein Auslaufen und geringe Geruchsemission Hohe Filtrationsgenauigkeit – geeignet für Rohölklärung und Feinfiltration Geringer Wartungsaufwand – lange Lebensdauer der Filterplatten Einfache Kuchenentleerung – Vibrations-/Austragssystem je nach Ausführung Optional beheizbar / dampfbeheizbar – geeignet für wachshaltige Öle Kompatibel mit Filterhilfsmitteln – geeignet für Bleicherde, Aktivkohle oder Kieselgur Kompakte vertikale Bauweise – große Filterfläche bei geringem Platzbedarf Typische Anwendungen: Klärung von rohem Pflanzenöl nach der Sedimentation Bleicherdefiltration nach dem Bleicher Polierfiltration nach Entschleimung oder Neutralisation Filtration von Rapsöl, Sonnenblumenöl, Sojaöl und anderen Pflanzenölen Technische Öle, Biodiesel und oleochemische Anwendungen Vorfiltration für Lebensmittel-, Biodiesel- und kosmetische Ölqualität Geeignet für Ölmühlen, Speiseölverarbeitung, Biodieselhersteller, oleochemische Anlagen und industrielle Fest-Flüssig-Trennung.

Condition: excellent (used), Year of construction: 2013, VEMAG FM 250 | Industrial hamburger and patty forming machine Manufacturer: VEMAG Maschinenbau GmbH Gsdpfx Aszgx E Ajl Ajud Model / Type: FM 250 Serial number: 2500431 Year of manufacture: 2013 Power supply: 400 - 460 V | 3 Ph | 50/60 Hz | 6 A Power: 2.5 kW Machine weight: 340 kg Width of flattening belt: 280 mm Diameter of inlet tube: 70 mm Overall dimensions: 2200 x 800 x 1500 mm Rated short-circuit current (SCCR): 5 kA rms Portioning capacity: up to 300 portions/min (depending on the grammage and raw material) The professional VEMAG FM 250 forming attachment is a high-performance, industrial peripheral device designed for direct connection to VEMAG's continuous vacuum filling machines (e.g., from the Robot 500 or HP series). The machine is a recognized market standard in the ready-to-eat food production, large meat processing plants, delicatessen production facilities, and fish and vegetarian processing industries. It is used for the automatic, continuous shaping and portioning of meat or vegetable mixtures into perfect hamburgers, ground steak patties, or patties with a "handmade" texture. The heart of the forming machine is an integrated, high-speed crescent blade driven by an advanced AC servo motor, which cuts uniform portions of the filling at the outlet of the forming nozzle in a repeatable and precise manner. The formed pieces then move onto a conveyor belt equipped with a flattening belt with a width of 280 mm and adjustable height. This system allows for achieving perfect geometry and consistent weight of the products, ranging from 15 g to 1000 g. Thanks to the gentle flow of the mass and the absence of a crushing effect, the products retain an optimal structure, juiciness, and natural texture during subsequent thermal processing.

Condition: like new (used), 3 units Length: 210 cm x 80 cm Height: 115 cm - 105 cm Guodpfozd Sr Dsx Al Ajd 3 units Length: 190 cm x 80 cm Height: 115 cm x 105 cm The stated price is per unit. Please see my other listings.

Condition: good (used), Rarely available. Idaho Little Gem 40" former for the production of potato croquettes etc. These are the industry standard machines used to produce for the World's leading fast food chains etc. Gujdpfx Aloigrvps Asd

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Godpfjpcibmox Al Aeud

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Godpfxomrqqde Al Ajud