Used Vermeer Rt 650 for sale (9)

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 20 h, This is a powerful ride-on trencher – an earthmoving machine primarily used for laying pipes, conduits, and cables. It is a robust carrier machine from Vermeer, a US-based construction equipment manufacturer, configurable with various attachments. Key features: Ride-on design: The operator sits on the machine, similar to a compact tractor. Trencher: With a long bar and a cutting chain, the machine cuts precise, straight trenches in the ground. Versatility: Thanks to interchangeable attachments (e.g., trencher, plow, rock wheel), the machine can be used for a wide variety of tasks. Applications: Trenching: For laying pipes, conduits, and cables. Underground infrastructure: Installation of water, gas, electricity, and fiber optic lines. Additional uses: Depending on the adapter, it can also be used as a soil loosener, with a backhoe or as a vibratory plow. Ljdpfsy It Rljx Ag Aoaf

Condition: excellent (used), functionality: fully functional, fuel type: diesel, Year of construction: 2013, operating hours: 1,194 h, worldwide shipping Ljdpfx Agjk Twt Ts Aoaf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! Ljdpfx Agjy Htgqs Asaf TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Tractor weight: 2,663 kg Tractor length: 320 cm Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm System pressure: 350 bar Pump output: 117 L/min Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Condition: used, conveyor belt length: 7,800 mm, conveyor belt width: 1,000 mm, Width: 1 m Lodjzvu Dgjpfx Ag Ajaf Length: 7.8 m - Two drive hydraulic motors on the front and rear drums with hydraulic hoses - Hopper - Support and beam that attaches to the machine - Approximately 20 diamond teeth included free of charge for the milling cutter

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Ledpfezumt Rox Ag Aeaf Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: used, functionality: fully functional, overall weight: 5,307 kg, fuel type: diesel, color: yellow, operation weight: 5,307 kg, fuel: diesel, gearing type: hydrostat, construction height: 1,930 mm, Equipment: additional headlights, hydraulics, rubber tracks, Vermeer D20x22 Series II HDD complete package with Iveco Stralis 430, mixing system, and DigiTrak. For sale is a comprehensive system for horizontal directional drilling (HDD), consisting of a Vermeer Navigator D20x22 Series II horizontal drilling rig, an Iveco Stralis 430 support vehicle with a container and drilling fluid/mixing system, as well as a DigiTrak locating system including display, receiver, and sondes. This package comes from a professional horizontal drilling/pipeline construction environment and includes extensive accessories. Scope of supply: * Vermeer Navigator D20x22 Series II horizontal drilling rig * Iveco Stralis 430, 3-axle * permanently mounted work/support container * large Vermeer tank for drilling fluid * additional tanks * mixing tank and mixing system * pumping equipment * hose and pipeline system * various fittings and connections * DigiTrak locating system Lajdozu Nrispfx Ag Aof * DigiTrak FSD display * DigiTrak handheld receiver * 2 DigiTrak sondes/transmitters * transport case for locating equipment * various HDD accessories * hoses and canisters * existing drilling fluid material The system is preferably sold as a complete package. Inspection and functional testing possible by appointment. Further technical data, photos, and information available upon request.

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 1VR4100C6C1000267, color: yellow, operation weight: 1,209 kg, empty load weight: 1,209 kg, fuel: diesel, Equipment: rubber tracks, For sale is a Vermeer D 6x6 Navigator compact directional drilling unit, previously used exclusively for demonstration and training purposes, complete with all accessories: 1 Vermeer D 6x6 Navigator drilling machine 1 ST 250 (960-liter) drilling fluid mixing unit 1 DCI SE UK3 drilling head positioning system (instrument, probe, monitor, 2 batteries) 45 drill rods, 1.83 cm / 6 feet each Lodpfeyt Smusx Ag Ajaf 1 drill head 1 150 mm / 6 inch hole opener The machine is not refurbished but is practically new!!! It is ready for immediate use!!!

Condition: excellent (used), functionality: fully functional, mileage: 769 km, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 1,490 kg, empty load weight: 1,490 kg, maximum load weight: 420 kg, number of seats: 1, mast type: telescopic, Year of construction: 2023, operating hours: 769 h, Equipment: gripper hydraulics, hydraulics, rubber tracks, An authorized SUBARU dealer offers a professional tool carrier with various attachments, providing different operating modes. Currently, we have a log grapple for handling logs or transporting heavy stones or slabs. This machine is designed for companies that require durable equipment that will not let them down. This is not a machine from China; it's a robust, solid American-made construction. We specialize in the sale of this type of VERMEER machinery. VERMEER S925TX 2023 • ONLY 769 OPERATING HOURS • LOG GRAPPLE • TRANSPORT Compact tracked mini loader: VERMEER S925TX Laodpfx Aozp Hz Dsg Aef Year of manufacture: 2023 Operating hours: only 769 Includes hydraulic log grapple Tracked drive Comfortable joystick control Auxiliary hydraulics with two flow ranges Universal attachment mounting Very compact dimensions Nominal working load capacity approximately 420 kg Lifting height to pin approximately 218 cm Machine width approximately 91 cm, depending on the type of tracks The Vermeer S925TX is a professional, maneuverable mini loader designed for use in areas where larger machines have limited access. Its compact design, low ground pressure, and tracked drive allow it to move efficiently on construction sites, green areas, lumber yards, and in narrow passages. Ideal for: Transporting and stacking logs and timber, Forestry work and tree care, Serving sawmills and lumber yards, Loading branches and wood materials, Municipal and landscaping work, Working on properties and in areas with limited space. Very low operating hours – only 769. The machine is from 2023 and represents an interesting alternative to purchasing a new unit. Grapple included. The loader is sold with a hydraulic log grapple. A bucket or other attachments are not included. High maneuverability and small width. The machine can be as narrow as 91.4 cm, making it ideal for narrow passages. Versatility. The mounting plate allows for the use of many different types of compatible attachments. Transport We offer transport of the machine to the buyer's specified address. The cost and delivery time are determined individually based on the unloading location. We can prepare a comprehensive offer including the purchase of the machine and its direct delivery to the customer. The stated price is net and applies to export and business customers. A significant discount is possible for individual customers – please contact us directly by phone to get your best price.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,300 h, The D10x15 S3 is a compact, mid-sized horizontal directional drilling rig that enables precise drilling in the ground, accurately controlling both direction and depth. This makes it ideal for small to medium-sized utility, service, and installation projects – such as laying fiber optic cables, power cables, or utility lines. Key Features - Compact size and efficiency - Power and performance Lodsy It S Ajpfx Ag Ajaf Diesel engine with approximately 60 hp (44.7 kW) – powerful drive. Traction force: approximately 44.5 kN – high thrust and pulling force. Maximum torque: approximately 2,030 Nm – ensures secure drill head holding. Performance and productivity - High conveyor belt speed → faster work. - Low noise level – more pleasant working environment (e.g., in urban areas). Other useful features - Slim design – easier setup in confined spaces. - Standard hydraulic pull-out system – for pulling out drill rods, pipes, etc. - Large quantity of portable drill rods – up to approximately 91 m in length in a row. - Horizontal directional drilling (HDD) is primarily used when: ✔ complete excavation of the surface is not possible or advisable (e.g., under roads, sidewalks) ✔ cables, pipes, fiber optics, or conduits need to be laid underground ✔ the construction site is located in an urban/densely populated area ✔ fast, precise installation with minimal surface disturbance is desired.