3
21.624 €
Starting bid plus VAT
51 days left
51 days left
Face drill rig
Btfbqde0is
Brand: ATLAS COPCO
Model: BOOMER H178
Serial nr.: 2190/85
Hours/Km: 401
- Engine: 6 Zylinder, Mercedes Benz OM441 AE1-3, 186 kW
- Total Weight: 17,500 kg
Hydraulic Rock Drill COP 1850:
- Torque: 980 Nm
- Impact Power: 21 kW
- Feed Force: max. 20 kN
- Rod Magazine for 8 Rods
- Drill Rod Diameter T51
Pf88b
- Hole Diameters: 89 mm - 127 mm
Compressor:
- Pressure: max. 10.5 bar
- Tire/Drives Tracks: 80 %
Extras:
- Compressor, Fillpump, A/C, CE-Certified
Looking for an arc sinker machine?
Buajrqdq
or controlled drilling anyway?
Is there a machine that has the best of both worlds?
Stop looking! Meet the new KORMEE steered drilling mast called MICRODRILL 2040.
(steered bow drill)
15X DRILL MACHINE Atlas Copco Ingersoll Rand Furukawa Sandvik Tamrock Stocknr.: BN1210 ALSO 10X DRILLING INSTALLATION WATER DRILLS AND 5X ANCHORING MACHINE 15X DRILL MACHINE Atlas Copco Ingersoll Rand Furukawa Sandvik Tamrock Stocknr: BN1210 ALSO 10X DRILLING INSTALLATION WATER DRILLS AND 5X ANCHORING MACHINE
Bqzhpeccyf
Continuous drilling machine WEEKE
Type BST 50
Bucvdlzkeg
Year 1992
We offer the following machining center on behalf of a customer:
Boring machine for steel machining
Description:
Working range X: 6500mm
working area: 30 x 1.050mm
working height: 920mm
Drilling and positioning: Servo motors
Positioning speed X 30m/min
Positioning speed Y 30m/min
Positioning speed Z 30m/min
I7sglkeyw
Drilling units horizontal 1
Rated power 30kw
Speed 0 - 2.500 u/min (infinitely variable)
Tool changer 1 x 5
Drilling unit SK40
Drilling diameter up to 40mm
thread cutting M6 - M...
Year Rig: 1999
Base carrier: Mercedes DB 1824
Power head type: KSP 7
Mud Pump: Stork NU25-10
DSB 2 /10
Mast length: 9200mm
Travel: 6800mm
max. hook load: 120kN
max. hydr. Pull down: 3500daN
hydr. Jip / swivelling range: 800mm
max. load: 1000daN
Mast food with hydr. Clamp: 324 - 416 mm
Hydr. power head / Rotation speed righ / left,
Bv3gb7rgrn
KSP 7-10
Troque: 1050 / 650 / 230 daN
Speed: 0 -85 / 0 - 120 / O -320 U/min
Passage: DN 172mm
Bolting Rig with two hydraulic drifters dh DP15.
All technical data can be found in the attached data sheet.
Jw0vv3
Deep hole drilling machine /deep hole drilling rig make LOCH type TB 2-11/300/2
make # 182-300-1970, year of construction 1991
technical data:
Drilling depth with plunging spindle max. 300 mm
workpiece diameter/ full drilling range in steel 4 - 18 mm
number of spindles 2
Drilling system ELB
Drilling method rotating tool
counter-rotating workpiece
working stroke, full + reaming max. 1000 mm
centre height 249,9 mm
Main spindle speed 96 - 2500 rpm.
Speed steps 4
feed stepless 0 - 1000 mm/min
Bnrbf...
Walk Behind, 2008 US EPA Label, Deutz 147 kW Diese
Gixuerz
♻️ Up to 3 x higher performance! ♻️
Our drill enables exact and safe drilling, on all levels.
It is easy to operate and is suitable for core drilling technology, municipal technology, civil engineering, road and sewer construction work.
** Technical data **
excavator class: 2,0 - 40,0 to
Operating pressure: 200 bar
Minimum hydraulic oil pressure: 120 bar
Max. hydraulic oil pressure: 220 bar
Water pressure: 5 bar
Bmb9qkd928
Minimum hydraulic oil flow rate: 50 l/min
Max. hydraulic oil flow rate: ...
Peddinghaus Fdb 600 - Burning & drilling machine
General overhauled - 2012!
Description:
Number of drilling spindles: 3 pcs.
Drilling diameter: 8-40 mm
Bp3y0wymms
Cutting system: Autogenous
Total power requirement: 30 kW
machine weight approx.: 6,5 t
max. workpiece size: 600 x 50 x 6000 mm
min. workpiece size: 80 x 8 mm
Machine dimensions (length x width x height): 2000 x 1900 x 2800 mm (Including roller conveyor length in total approx. 8,80m)
The Peddinghaus FDB 600 flat steel drilling and flam...
- Rock Drill "HL 1010 Hydraulic Top Hammer"
- Engine: CAT C9.3 with 224 kW
Pf9a2
- Hole Dept: max. 33 m
- Sevenfold Rod Handler
- Weight: 18.7 t
- A/C
Coordinate drilling rig KBA40 // 15000
BJ2017 // approx. 800 operating hours.
Equipment : Tool changer 10-fold, minimum quantity lubrication spindle fed through, cooling lubricant supply, vices 8 pcs. pneumatic, software, 15 inch monitor.
The machine is set up and commissioned by us!
Additionally it will be checked before delivery.
Bs3vrcngbn
If you have any questions, please do not hesitate to contact us.
Blast hole drilling rig,
Liebherr R900 B carrier,
year 1987
with 1 piece hammer
E2cquxf7o
Tamrock 122, 36 mm drill bit (changeable),
with suction,
engine Deutz (renewed approx. 4000 hours ago)
Mast Length: 18.8 m
Type: Exploration Drill Rig, Water Well Drilling Rig
Motor Type: KHD F121413F
Hoisting Force: 127 kN
Regulary Hook Load Capacity: 100 t
Accessories not included in the price:
- two trailers, each loaded with 21 Wirth double-wall screwable reverse-circulation 9 m drill pipes of outer Ø 311 mm and inner Ø 211 mm.
- 1,300 m of 5" x 4-1/2" IF API R II Drill Pipe
- three Drill Collars
- Drill Pipe Handling Unit for mounting and dismounting of drill pipes
Cftwyaj
- two Wirth ...
Carrier CAT 325 D
construction.2007 approx. 19.900 h
for drilling rig
Wimmer Jura Luna 3.322
SN AB100
0mynanc
BJ 2002
3 mounts / 3 hammer drills
hammer drill: Tamrock HE322
Type: Foundation Machines, Vertical Drilling Rig, Rotary Drilling Rig#
(feed with main winch) 17 t
Base Carrier: O&K TGD 24
Working Hours: 17.478
Engine: Deutz BF6L513 RC, hp/kW: 206/280
Kelly Winch: 170 kN
Auxiliary Winch Pull: 75 kN
Auxiliary winch 7.5 t
Bv2jyhl7go
Weight: 68.4 t
Overall Height: 20.4 m
Pull-Down Piston Push: max. 150 kN
Rotary Drilling Rig Winch Pull: 170 kN
Drilling Diameter: appx. 180/150 cm
Maximum traction main winch: 17 t
Working Hours: 50
Transport Weight: 15.5 t
Additional Information:
Basic Rig DB 1012, including:
- Standard Mast DM200 with Feed Gear
(pull down/pull back force 100kN [22.5K lbf], total length 6m [19.7 ft], 2-piece sectional construction 4.5m [14.8 ft] and extension 1.5m [4.9 ft]
- Hydraulic OilTank
(460 l [119 gal]
- Load Sensing Direct Drive Hydraulics.
- Equipped for single or double head Drilling
- 4-Pump-System with 1 x 300 l/min, 1 x 100 l/min, 1 x 40 l/min, 1 x 25 l/min
- Pump Doubl...
Boring barFactory Super DrillType MT Drill Arbor SHQ 54042MK 4Fitting for Boring Heads B 80Boring bar diameter 35 mmLength 150 mmTotal length 310 mmWeight 2 kg
Sumbkhkd
DRILL AND MACHINE PINS SCHEER BS6101 AUTOMAT WHIT PROGRAMM CNC PC
Hebfczff
Max. load capacity: 30t, with trolley.
Bfplvrfy
grinding diameter max.: 40 mm
workpiece length: 700 mm
S8yl8ilsr
table adjustment: 0-50 mm
table adjustment: abrichten=25 mm
cross table: quer/transversal=80 mm
number of spindle speeds: 3000 U/min
total power requirement: 3,3 kW
weight of the machine ca.: 0,8 t
space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m
Application area for types of grinding such as:
- 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin
- grinding area for drills Ø 5 - 40 mm , right s...
Stago PB 5010 paper drill
The machine is in very good condition, the newest model. Currently produced.
The device is activated by an electric foot pedal.
Smooth adjustment of the spacing of the heads, waste bin.
Grwcn29
The set includes drills, sharpener, instructions.
The machine has a drill cooling and lubrication system.
Technical parameters:
Number of heads: 2
Revolutions per minute: 2400
Maximum drilling depth: 60 mm
Drill diameter: 2-10 mm
Maximum distance of the hole from the edge: 75 mm
...
Drilling capacity in steel (diameter) 40 mm
throat depth 1000 mm
Short spindle MK 4
column diameter 220 mm
feed rate 0,15-0,2-0,3-0,36 mm/rev
spindle stroke 160 mm
spindle speed 63-1400 rpm.
Weight 1250 kg
space requirement approx. 1700x700x2500 mm
Equipment:
- Electromagnetic feed clutch
Cep092m0
- clockwise rotation
- Base plate with T-slots
- Coolant device A
Antriebsleistung Spindelmotor : 1.1 kW
Gewinde schneiden in Stahl 12 mm
Spindeldrehzahlen 140 2500 U/min
Drehzahlstufen Motor + Keilriemengetriebe 10
Spindelaufnahme : MK 3
Pinolenhub 130 mm
Drehwinkel Ausleger + - 180°
Maschinengewicht 288 kg
Maschinenhöhe : 2150 mm
Yuejkye
Ausladung 530 mm
Ausladung min von 160 mm
Mit 2 Rollbahnen MD 50 h ( Handrad ) mit elektronischen Längenanschlag links und rechts ca. 2000 mm
Lagerort: Nattheim
Magnetic drill, hand drill
-Magnet foot: Fein 2000
-Bring machine: AEG type HBE-IV
-Recording: MK2
Bhak8goepw
-Max. Drill: Ø 23 mm
-Connection: 265 V/200 Hz
-Dimensions: 700/300/H670 mm
-Weight: 49 kg
DRILL PRESS SERRMAC ETD 22 - PGM
Rotating table + vice
Precise, silent and reliable
Direct transmission by INVERTER without pulley change
Precision spindle axis with tempered morse taper
Power supply 380V 3
Rectified column.
Standard configurations :
- Digital display with spindle rpm indication
- Tapping with working depth adjustment
- LED lighting system 24 V
- Electronic membrane control panel
- Spindle rotation reversal button
Drilling on steel mm: Ø 22
Tapping: M14
Taper attachment: CM2
Co...
Number of drilling agregates 4 Stk.
Fb7i29dj
Automatic Fitting-press in nein ja/nein
Pot volume drill nein ja/nein
Banut 655 piling rig is for sale in Russia.
Delivery to any country. Additional information and photos are available upon request.
B2uxcq8u
Table boring mill
Fab. UNION Typ. BFT 110 NC
year 1986, retrofit 2006 by Union
Make: UNION
Type: BFT 110 NC
Year of manufacture: 1989
Control type: iTNC 530
spindle diameter: 105 mm
x-travel: 1750 mm
y-travel: 1250 mm
z-travel: 800 mm
B-axis popular angle
Bxbgqhdyty
w-travel: 480mm
Spindle mounting: DIN 280-A50
Table size: 1250 x 1400mm
max. workpiece weight: 400 kg
spindle speeds: 4 - 2500 rpm
rapid traverse X, Y, Z: 10.000 mm/min
rapid traverse W axis 5000 mm/min
electrical design: 380/50 V/...
In working order!
Rw2lu3ob
Drill press, drill press, stand drill, pillar drill
-Speed display: (clock) defective
-Table size: 315 mm
-spindle taper: MK3
-Projection: 285 mm
Nlgwh
-Speeds: 200 - 1400 rpm
-Columns: Ø 130 mm
-Spindle stroke: 150 mm
-Gear: VIP
-Feed: 0.1-0.3 mm/rev
-Dimensions: 440/900/H1900 mm
-Weight: 408 kg
Drill grinding machine Darex SP-2500G
Mwj2ww
Year of construction: 2001
incl. 4 pieces of recordings
incl. 3 pieces of grinding wheels
Used machine
Year of manufacture: 1990
Drilling beam: 19 spindles
working width: 630 mm
Gantry passage: 710 mm
drilling stroke : 120 mm
Jw8piq
position adjustment drilling unit: 0-45 mm
position adjustment hole line: 0-150 mm
spindle speed: 2800 rpm
shank diameter of the drill: ø10 mm
clamping height of workpieces max. 100 mm
motor: 1,5 kW, 380 V, 50 Hz
Working height: 850 mm
Compressed air connection: 6 bar
Weight: approx. 310 kg
Availability: short term
Storage location: Röllbach
Paper drill Hang 113-00
The machine in perfect condition, the latest product.
SmartDrill – A small four-spindle paper drill for office, digital printing or small offset printing.
An economical solution for production orders with standard hole patterns.
Incorrect or inaccurate hole displacement is a thing of the past.
Jaanx889g
Model Hang 113-00
4 spindles, fixed spacing 80 mm
Drilling diameter 3 – 8 mm
Adjustable distance from the edge from 6 mm – 23 mm
Drilling time 5.5 sec.
paper stack height ...
Pankoke & Kochsiek drawer drill, vertical multi-spindle automat, notching.
Bxfq3rtfad
Horizontal directional Drill Vermeer D7X11 Series II Navigator
Demo machine - 451 w.hours
ADDITIONAL EQUIPMENT:
Ytyvt0
MIXER VERMEER MX125
LOCATING SYSTEM – DIGITRAK MARK III
DRILL RODS – 38 PCS, D 42 ММ, L 1.80 М
NEW DRILLING EQUIPMENT – STANDARD DRILL BIT, DRILL HEAD, STARTER ROD, REAMER COMPACT Ф150 ММ /TUBES Ф90-125 ММ/, DRIVE CHUCK WITH SUB SAVER /Ф92-105 ММ/, HEX COLLAR
Drilling machine, stand drilling machine, column drilling machine, tapping machine, boring mill,
Sprcawp2
-Clamping table: 470 x 380 mm
-spindle taper: MK3
-Speeds: from 40 to 1800 rpm
-Feed: 0.07 - 0.35 mm
-Spindle stroke: 225 mm
-Electric motor: 1.5/1.85 kW
-VIP gear:
-Dimensions: 600/980/H2370 mm
-Weight: 796 kg
Double sided sawing and drilling machine Balestrini MIA
sawing engine power 2.2 kW
drilling motor power 2.2 kW
Bo87efe77y
Bore diameter variabel mm
Number of heads horizontal 3 St.
Number of heads vertical 4 St.
Dimensions (L/W/H) 6100x1500x2300 mm
Weight 950 kg
1 NEW drilling and milling center Götzinger Power Drill 300
With the Götzinger PowerDrill you can, depending on the type and design:
- Drill on the front and on the long side
- Dowels of front doors, pegs, fighters
- The drilling patterns are freely programmable
- You can drill: handle slides and corner bearings, with quick-change
multiple spindle
- Y...
Durselen PB-01 05 four-head paper drill
The device in perfect condition, like new!
This is one of the latest Durselen models, the most advanced model.
Production Germany.
Four drilling heads with adjustable spacing.
Ft3lzdd
The machine has a pneumatic cooling system for drills.
Programmer to control the front bumper, allowing you to enter the programmed distances.
Smooth regulation of spindle speed and smooth regulation of head lowering speed.
Compressor for waste disposal
Sliding cutting stick ...
Quick Radial Drilling Machine
Manufacturer: DONAU
Type: DR13G
Year of manufacture: 1978
Machine lubricated, quill completely new, drive belt renewed, discharge stops renewed, adjustment of all guides, radial and discharge clamping adjusted.
Drilling capacity: for ST60/GG 22:13/16 mm
Thread: SDT60/GG22:M10/M12
throat depth: 800 mm
Height adjustment of the drill head electrically: 400 mm
spindle size: MK2
spindle stroke: 100
Pvvm03
Rotational speed: 200 - 3400 revolutions/min (infinitely variable)...
Twist drill grinding machine, twist drill grinding machine NSC SCHLUMBERGER
Manufacturer: NSC SCHLUMBERGER (France) type AF1
Fabr. No. 1049 year 1974
Grinding range ø 10-80 mm
Tool length of 720 mm
Point angle 80-160 °
2 cut tool speed 40 RPM.
Tool speed at 3 cutting 26 RPM.
4 cutting tool speed 20 RPM.
Feed 0.01 - 0.1 mm/U. 10 levels
Grinding wheel diameter of 230 mm
Grinding wheel speed 2650 RPM.
Motor 2,2 kW
Power supply 400 Volt, 50 Hz
-Precision - six Chuck REISHAUER ø 240 mm, 6-80 mm clamp...
Rotary hammer, chisel hammer, combination hammer, Bosch hammer
-Boring/chiselling
Qlnojycr0
-SDS Plus: recording
-Transport case
-Weight: 5 kg