Used Waste Shredder for sale (4,099)

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Nedpfx Asu Tq S Hefljdd Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Current voltage 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Nodev Sqrpspfx Afljdd Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Njdpjxy Iycefx Aflsdd Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 556, Model: Lindner Micromat MS2000 Year of Manufacture: 1997 Condition: Refurbished 2025. Zero operating hours since refurbishment. Location: Riga, Latvia Machine Specifications: Machine Weight: 9.5 t Dimensions: Not specified. Material Suitability: Plastics, mixed waste, etc. Drive System: Motor: Elin AC Motor, 75 kW, 1500 rpm, 400 V, 50 Hz. Frame size: 280S. Mounting: B3. V-belt drive: Ratio i=0.93. Gearbox: Stiebel Type 0220.15. Bore 140 mm. Ratio i=20. Safety Coupling: SecMatic Type 580.32.3.2. Factory setting: 1300 Nm. Rotor Speed: 80 rpm. Hydraulic Unit: Type: MM2000 / 13 / 6 Output: 35±5 l/min Oil Tank: 100 l. Oil: Castrol Vario HDX. Pressure: Inlet 160 bar, Outlet 60 bar. Drive Motor: 5.5 kW, 1425 rpm, 400 / 660 V. Mounting: V1. Pusher Cylinder: 60/35×605 mm. Ndedpsxvmqrofx Afljd Swivel Cylinder: 50/30×700 mm. Cutting System: Knives: 104 pcs. Size: 43×43×23 mm. Screen Hole Size: Ø50 mm. Material Transport: Screw conveyor. Refurbishment Summary (Completed 2025): Paint: Components cleaned, prepped, and painted. Color: RAL7032 / 2002. Rotor: 22 new teeth installed. 35 existing teeth repositioned. 30 protective tooth covers replaced. Counter-Knives: 3 internal counter-knives replaced. External counter-knives repositioned. Structural Work: Welding repairs performed on frame where cracks were present. Hydraulics: Hydraulic station oil filler cap and motor cover repaired/replaced. Control Panel: Repaired. Assembly: Equipment assembled, installed, and packaged

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Njdpfsxu I T Eox Afljdd Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES Ndjdpfx Afjwu Rgdjled – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2012, operating hours: 1,259 h, functionality: fully functional, power: 36.41 kW (49.50 HP), overall weight: 2,000 kg, Schliesing 355 TX / Wood Chipper / Shredder / Mulcher / 21 cm Ø • Manufacturer: Schliesing • Model: 355 TX • Year of manufacture: 2012 • Operating hours: 1,259 h • Power: 36.41 kW / 49.5 HP • Wood chipper • Shredder • Mulcher • Brushwood processor • Kubota 4-cylinder engine Nedpjxukccsfx Aflsdd • Feed hopper: W: 1.34 meters x H: 1.06 meters • Infeed capacity: 21 cm Ø • Cutter disc: Ø 80 cm • Cutter disc: Nominal speed 1,140 rpm • Fuel tank: Approx. 50 liters • Technical inspection (TÜV): 08/2026 • Total weight: 2,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale based on our general terms and conditions.

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Ndedpfx Afexbyx Tjljd Full load current: 32 amp Main fuse: 35 amp

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Ndjdpfx Afera N A Nolsd Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation Nsdpfoxgtp Aox Aflsdd

Condition: excellent (used), Catalogue number 7293 TECHNICAL DATA - Loading hopper dimensions (top, LxW): 1200x1520mm - Loading hopper dimensions (bottom, LxW): 1000x1520mm - Outlet for shredded wood + auger - Rotor working width: 1500mm - Main motor: 45kW - Pump motor: approx. 1.5kW Njdper Hmxdofx Aflodd - Number of knives: 41 pcs - Knife size: 40x40mm - Screen: 15mm x 20mm - Pusher drawer - Electric auto-reverse - Dimensions (LxWxH): 2450x2460x1720mm - Weight: approx. 3000kg ADVANTAGES – German-made – Very good condition – Used shredder Original photos Net price: 155,900 PLN Net price: 37,120 EUR depending on the 4.2 EUR exchange rate (Prices may change with higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net Nsdpodwktkjfx Afledd (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Ndodpfx Aoufi Rxeflod Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Nedpfxoxgq S Us Aflodd With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Feed hopper inlet: 1600x1500mm - Rotor working width: 1500mm Nedpfx Afelnkxweljdd - Main motor: 45kW - Pump motor: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pusher drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approx. 9000kg ADVANTAGES – French manufacture - New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Ndodpfx Asd Dgw Ujfljd Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale Ndsdpfxetzbvyo Afljd year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Condition: used, Double-shaft shredder Drive 37.50 KW Ndodpsxgtcvofx Aflsd

Condition: excellent (used), CATALOG NUMBER 7595 Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer Ndjdev R E Amopfx Afled – Auto-reverse – Used chipper in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net Njdpfx Afjd E R D Solodd - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: excellent (used), CATALOG NUMBER 7032 Ndjdpfx Afemgbt Ieled TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Year of construction: 2023, condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Ndedpfx Aedv Eu Hefljd Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES Nodpfotrwt Nox Aflsdd – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Ndsdpfx Afogmfa Ajlod Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: excellent (used), CATALOG NUMBER 7240 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 55x50 mm - 2 toothed feed rollers from below Ndedpfxsrby Dle Aflod - Lower roller motor approx. 3 kW - Toothed feed roller from above - Upper roller motor 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight approx. 3500 kg – German made - Autoreverse (adjustable) – Used shredder, in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on rate 4.2 EUR (Prices may change in case of significant fluctuations)