Used Weima Wood Shredder for sale (82)

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm Bljdpew H Rn Esfx Amnji - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Bsdpfxewnx Uij Amnsli Weight: Approximately 2,500 kg

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany Bedpfx Aozh Imremnjli – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro Bedpfx Amszh Il Ujnsli (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm Bledpfx Ajzh H T Domnei - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 1998, total length: 2,100 mm, total height: 1,730 mm, total width: 1,700 mm, Colour: Red Empty weight: 1.500 kg Price: On request - Details: - └ Description: 400 volt recording 45 A Fuse 63A - Year: 1998 Bodpfszhtm Dsx Amnsli - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 500-3752 - Main motor power [kW]: 18,5 - Rotation speed [rpm]: 90 - Hydraulic unit power [kW]: 0.8 - Oil tank capacity [L]: 20 - Rotor width [mm]: 800 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 700 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 21 - Transport dimensions: 2100mm x 1700mm x 1730mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, operating hours: 13,602 h, total length: 2,200 mm, total height: 1,100 mm, total width: 1,550 mm, Colour: Red Empty weight: 1.200 kg Price: On request - Details: - └ Description: 400 volt take-up 48A fuse 63A - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 600-229 - Operating hours: 13602 - Main motor power [kW]: 18,5 - Rotation speed [rpm]: 380 - Rotor width [mm]: 600 - Number of shafts [pcs.]: 2 - Opening width [mm]: 550 - Opening length [mm]: 50 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 32 - Transport dimensions: 2200mm x 1550mm x 1100mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bedjzhr Tvopfx Amnoli VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, Hacker with a 600 mm rotor width Bledezhxdzepfx Amnsi large rotor diameter of 36.8 cm with 30 blades 18.5 kW motor

Condition: ready for operation (used), Year of construction: 2012, Brand: Weima Model: WL4 Bodpjzg Dxhofx Amnsli Year of manufacture: 2012 Motor: 18.5 kW Stock no.: 2002962 OPTIONS: Motor-driven screw/angle pipe: 2m

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: Bledpsh Eiw Ijfx Amnsi - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: Bledpfxjh Hnp Dj Amnji - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. Bsdopdqzxspfx Amnjli To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2023, Single-rotor shredder with a push floor Rotor width: 1400 mm Blodpszgd Rdjfx Amnsi Motor: 55 kW

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Industrial WEIMA extraction and briquetting setup removed from a working environment. Used from new by the same company and regularly serviced/maintained. Includes: WEIMA TH 520 extraction/filter unit WEIMA WL8 shredder Briquette press Blower system Bsdpfxjzgclaj Amnjli Control cabinet Associated ducting/pipework Model: TH 520 Year: 06/2010 400V 3 Phase 7.5kW 50Hz Weight: approx 1.2 tonne Joinery workshops Furniture manufacturing MDF/wood waste processing Recycling operations Biomass fuel production System is currently operational and can be demonstrated working. Buyer responsible for removal/transport. Located: South Wales Message for more details, viewing or video walkthrough. Open to offers

Condition: used, Year of construction: 2018, total length: 2,400 mm, total height: 1,000 mm, total width: 1,200 mm, Colour: Red Empty weight: 1.000 kg - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: 600-797 - Main motor power [kW]: 22,2 - Rotation speed [rpm]: 1770 - Rotor width [mm]: 400 - Number of shafts [pcs.]: 2 - Opening width [mm]: 385 - Opening length [mm]: 93 - Sieve perforation [mm]: 20 Bljdpfx Ajy Tmu Uemnsi - Number of fixed knives [pcs.]: 18 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,650 mm, total height: 3,380 mm, total width: 2,600 mm, Colour: Grey - Documentation available: No - CE certificate present: No - Main motor power [kW]: 11 Bedpewf El Aofx Amnoli - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Opening width [mm]: 1000 - Opening length [mm]: 1200 - Transport dimensions: 1650mm x 2600mm x 3380mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Bledpfswu Uy Ijx Amnei Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,100 h, functionality: unexamined, overall weight: 2,200 kg, number of blades: 42, rotor diameter: 260 mm, WEIMA WL 6 – Single-shaft shredder for wood waste, year of manufacture 2007, only approx. 1,100 operating hours. For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from a running production facility and is in good overall condition, considering its age. Special feature: The operating hour meter shows only approx. 1,100 hours – with a year of manufacture of 2007, this corresponds to an average usage of only around 60 hours per year. Rotor, bearings, and drive train are therefore expected to show very little wear. The machine is equipped with a conveyor belt feeding unit that automatically feeds the material. The top deck is removable – operation is also possible by manual feeding. The separate control cabinet is fully included and professionally installed (Moeller/Eaton contactors, motor protection switch, safety relay, Siemens S7-200 basic PLC). The machine has not been put back into operation after being removed from the production facility. Inspection in Lennestadt (North Rhine-Westphalia) is possible at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 hours (meter reading) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 RPM Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Particle size: 10–60 mm adjustable Feed opening: 800 x 1,250 mm Extraction nozzle: Ø 200 mm Bljdpfx Amoy U Nu Tensi Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt feed (top deck removable) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relay More pictures on request.

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Double knife row with 28 pcs. Bodpexwyx Sofx Amnjli Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Condition: good (used), Year of construction: 1993, operating hours: 1,400 h, Slow-speed shredder with moving floor. 18.5 kW motor. 20 knives on the rotor. Only 1,400 operating hours. Sieve perforation can be selected between 25 and 30 mm. Partially overhauled: new rotor bearings, new motor. Bsdpfjy Im D Eex Amnoli

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm Blsdoyi Ticopfx Amnoi The machine is in very good technical condition, ready for further work.

Condition: like new (used), engine power 18.5 kW hydraulic pressing drawer feed hopper height 90 cm + additional 200 cm operating pressure 180 bar Blodpfx Aeyzm H Temnsi control panel operation CE marking year of manufacture 2002

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA Bedpeyfwz Isfx Amnoli MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Blodpfxeyfwxgs Amnoi MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2,500 kg The machine has been refurbished: - Rotor shaft newly mounted - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Bljdoy Ahr Hjpfx Amnsi Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.