Used Water Cooler for sale (8,177)

Condition: used, mileage: 8,00,000 km, power: 375 kW (509.86 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Front axle load 9.0 t, Audio system: CD radio (Bluetooth), Right exterior mirror with maneuvering position, 220 Ah battery, CB radio, Aluminum compressed air tank, Additional compressed air tank, Air horn, Electrical pre-wiring in the cab 24V / 100 A, Cab: steel-sprung, Comfort, Suspension: Front springs 9.0 t, 4 leaves, Additional parking brake on the front axle, Vehicle without rear window, 16-speed gearbox - Type: G 280-16, Rear axle differential gear 300, 12.7 cm info display with video function, Interior filter for construction site vehicles, Communication interface, Fuel tank: 390 L, Aluminum, left, Alloy wheels 11.75x22.5 (ALCOA Dura-Bright, on front axle), Alloy wheels 9.00x22.5 (ALCOA Dura-Bright), Air intake behind the cab, Reinforced engine brake, Reinforced engine compartment encapsulation, Auxiliary drive MB 123-10c, Parameterizable special module, Spare wheel, Acoustic reversing warning (external warning signal), Seats in the cab: Driver's seat, sprung comfort seat, Seats in the cab: Driver's seat backrest foldable, Exterior sun visor, Sunshade roller for side window, driver's door, Voltage converter 24V / 12V 10 A, Stowage flap outside left, 12V socket in the co-driver's footwell, Additional 24V socket in the co-driver's footwell, Turbo-retarder coupling, Preparation for reversing camera, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air connection in the cab, Cab: Width 2.30 m, Cab: Movable cab entry, Cab: Tilting mechanism hydraulic, Cab: M ClassicSpace, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Power windows, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Manually operated roof hatch (steel), Interior filter: Pollen filter, Body / Superstructure: Tipper, Steering assist pump unregulated, Air compressor 2-cylinder, Heated air dryer, Engine 12.8 L - 375 kW R6 Diesel (OM 471), Frame lowering without bellow residual pressure regulation, Ramp mirrors, Waste heat recovery, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver's functional seat, Stabilizer front axle, Cab socket 24V, Tachograph / EC control unit, Rear underrun protection fixed, Preparation for toll collection, Front axle straight, Water pump regulated, Permissible gross weight 26.0 t, Oil cooler gearbox * Mileage: approx. 800,000 km * Engine: OM471 Diesel * Power: 375 kW / 510 hp * Displacement: 12,809 ccm * Transmission: Automatic transmission * Retarder: available * Axles: 6x4 * Front: Leaf suspension * Rear: Air suspension * Body: Timber transport / stakes * Body length: 6.20 m * Body width: 2.47 m * Unladen weight: 14,230 kg * Permissible gross weight: 26,000 kg * Technically permissible total mass: 28,000 kg * Payload: 11,695 kg * Color: Black * Emission standard: Euro VI * VIN: WDB9642241L982193 ----* Condition / Note: * ATTENTION!!! * The gearbox was removed together with the clutch. * Significant signs of wear were found on the retarder coupling and the retarder gear. Therefore, a repair of the vehicle is necessary. The worn and damaged components can be clearly seen in the photos.---- * TÜV (technical inspection) valid until 09/2026 Ksdpfx Aezu U H Eshhodr * First registration: 09/2015

Condition: used, power: 141 kW (191.71 HP), Year of construction: 2020, operating hours: 2,745 h, Equipment: ABS, air conditioning, all wheel drive, front linkage, * General Data * Model: JCB FastTrac 4190 * Year of Manufacture: 2020 Ksdpfxezl Itgj Ahhedr * Vehicle Type: Compact Tractor/Carrier Vehicle (FastTrac Series) * Application: Construction, Agriculture, Off-Road Operations, Material Transport * Dimensions and Weight * Wheelbase: approx. 2981 mm * Overall Length: approx. 5270 mm * Width: approx. X mm (with/without attachments) * Attachment/Stability Features: Integrated profile/side guidance, optional ballast weight * Operating Weight (unladen/approved): approx. 12990 kg * Engine and Performance Data * 60 km/h approval * Engine Version: Diesel engine (Common-Rail/Turbocharger depending on equipment) * Displacement: approx. 6596 cm³ * Power: approx. 141kW * Fuel System: Turbocharger, exhaust aftertreatment (e.g. DPF depending on model) * Cooling: water-cooled engine, oil cooler * Drive and Chassis * Drive: All-wheel drive (4x4) or all-wheel drive/rear-wheel drive, optional automatic brake control * Transmission: hydrostatic or synchronized manual transmission (depending on version) * Oscillating Axle/Steering: Steering angle for tight spaces * Ground Clearance: approx. 300 mm * Payload/Lifting Forces: Lifting capacity according to model designation * Hydraulics and Accessories * Hydraulic Pressure: approx. 180 bar * Hydraulic Flow: Main circuit/secondary circuit depending on version * Pressure and Flow Control: Proportional control, joystick operation * Connections: Quick couplings, front/rear hydraulics * Front Loader Compatibility: yes * Attachments/Equipment Features * Front Loader: * Rear Hydraulics: available * Quick Change Systems: available, type (e.g. oil hose quick change system) * Front Attachment (e.g. front hydraulics) * Cabin and Ergonomics * Cabin Type: enclosed operator cabin * Field of View: 360° all-round visibility, large front window * Driver Comfort: Steering wheel adjustment, seat comfort, air conditioning/heating * Operation: Joysticks/multifunction lever, button layout * Noise Level: typical value in the interior (dB/A) * Electrical System and Systems * On-board Voltage: 12V * Display/Control Panel: Multifunction display, telemetry option * Safety: Hill start assist, optional reversing camera, retractable warning signs * Diagnostic System: OBD/manufacturer diagnostic tool available * Safety and Protection * Rollover Protection (ROPS)/Sun Visor: available * Seat Belts: 3-point seat belt * Hydraulic Protection/Covers: Fenders, covers * Lighting: Work lights front/rear, turn signals * Maintenance and Condition * Maintenance Condition: regular maintenance according to manufacturer's schedule * Oil/Filter Change Intervals: according to manual * Special Features (reflection of equipment) * Modern Comfort Package: Air conditioning, radio, USB port * Telemetry Option: Fleet management available * Safety Extras: Reversing sensor/camera, immobilizer * Fassi loading crane F135A.2.23 * Linear remote control * Hydraulic winch V20 * 3-point support * Swivel supports * Operation with two-shell grapple possible * Additional hydraulics at crane tip with quick coupler * 420° swivel range The JCB machine is available immediately, subject to prior sale.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 98350019004, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: Kdedpfszlrdcex Ahher • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: new, functionality: fully functional, Drum Cooler CCn -120/70 for powder coatings Main unit, including Kdsdpfx Asw Snfdehhor • Cooling calender with stainless steel cover, steel belt and crusher unit • Additional edge sealing parts • Stainless steel mainframe, rails Akzo standard • Additional safety switch monitoring working position • Water collecting tank stainless steel • Airknife and rubber scraper • LEV taper in crusher housing top • LEV product outlet funnel • Sliding cover after calender • Lototo Switches with trapped key for crusher and calender hood • Software and Hardware integration of safety switch of safety inlet device incl. safety PLC extension. Safety switch from BBA Innova, all other hardware from customer side.

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  - Water Softener - Compressor | Josval Sauber 240 D - Mill | Robix ROPPI 250 - Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Kjdpfxstka Aqe Ahhsdr - Portable Pump 2.20kw INOX - Hoses, cones, keys - Manual Isobaric Bottling Machine 4 spouts - Automatic Labeler | Arca L10-8128 - 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans - Videojet 1220 Batch Coder - Infrico Undercounter Refrigerator with 3 Doors - Brewhouse | Spadoni | MBS 600 VAP | 2014 - Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler - Hot Water Tank | Spadoni | 10hl - Cold Water Tank | Spadoni | 10hl - Mixing Tanks | Spadoni | 1.5hl with Tangential Entries - Mixing Tanks | 1.5hl with Tangential Entries - 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl - 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl - 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH - Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry Kdsdpfx Ajigqutshhjr -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. Kodpfx Ahex S H U Sehedr - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: used, Year of construction: 2020, Overview  This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  - Brewhouse capacity: 5 hl - Design: 2-vessel brewhouse - Heating: Steam-heated - Control: Semi-automatic PLC (Siemens) with touch panel - Fermentation: Open fermenters with cooling jackets Scope of Delivery - Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding - Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping - Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) - Water Mixing Station | — | — | 2020 | Solenoid valve, mixer, meter - Brewhouse Control System | Siemens (PLC) | — | 2020 | Semi-automatic, recipe control - Steam Generator | — | — | 2020 | Gas-fired, incl. water treatment, TÜV & CE - Open Fermenters (2x) | Speidel | — | — | 625 L each, with cooling jacket - Horizontal Storage Tanks (5x) | — | — | — | 500 L each - Hot Water Tank | — | — | — | 700 L, insulated, electric heater - Cold Water Tank | — | — | — | 700 L, insulated, cooled - Water Cooler | — | BL 040 | — | 1.8 kW, cooling & heating function - Fermentation Temperature Controllers (3x) | Cube Plug | — | — | — - Mobile Pump | — | — | — | — Kjdpfx Ahex Nm Sxjhodr - Brewery Accessories | — | — | — | Beer hoses, kegs (30 L & 50 L), misc. parts Optional: Cold Room with Refrigeration Unit | — | — | — | Single-wall, no cooling jacket  

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Kdodpfx Ahozt Sb Dshsr Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 2008, condition: ready for operation (used), A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible. Ksdpfov Ip Tdjx Ahhedr

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz Kjdpfxoph U Ano Ahhodr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units Kjdpoxgumcofx Ahhsdr – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Manufacturer: KSB Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Kdsdjxb Tvxjpfx Ahhsr Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Pump weight without motor: 4100 kg Length with motor: 7723 mm

Condition: used, mileage: 4,66,300 km, power: 300 kW (407.89 HP), first registration: 07/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, loading space volume: 9 m³, Year of construction: 2005, Equipment: ABS, air conditioning, electronic stability program (ESP), * MB 3241 B * Liebherr HTM 904 * 500L water tank * leaf-sprung suspension * medium-length cab * differential lock (rear axle) Kjdpfx Ahozfrdcjhedr * sun visor * electric windows and mirrors * air-suspended driver's seat * AP axles (rear axle) * Telligent II transmission * wheelbase 4200 mm * transmission oil cooler * reinforced clutch * and more.

Condition: like new (used), The MULTIMIG F SYN series welding machines feature state-of-the-art technology. Instead of the conventional 50 Hz frequency used in transformers, these welders operate at frequencies ranging from 20 kHz to 50 kHz. This provides the equipment with excellent dynamic response, portability, compact size, low weight, reduced energy consumption, and more. The MULTIMIG F SYN welding machines are suitable for welding various materials such as stainless steel, carbon steel, alloyed steel, etc. Therefore, they can be used in general metalworking industries, machinery and equipment repair, construction, production and repair of installations in the petrochemical industry, DIY workshops, and more. Features of the MULTIMIG F SYN series welders: - Digital control system with accurate welding parameter display - High-performance multifunctional power source (MIG/MAG) Kdodpfx Aexfln Uehhjr - Dynamic control and stable welding parameters - IGBT technology for low energy consumption - Rated duty cycle: MULTIMIG 500F SYN = 500A at 60% (40°C) Specification: - Input voltage (V): 3~380/400/440±10% - Frequency (Hz): 50/60 - Input current (A): MIG 43; TIG 32; MMA 43 - Output power (kW): MIG 23; TIG 18; MMA 23 - Welding current (A): 40-500 (MIG) - Welding voltage (V): 10-50 (MIG) - Open circuit voltage (V): 63 - Duty cycle (40°C): 60% at 500A, 100% at 400A - Wire diameter (mm): Fe: 0.6/0.9/1.0/1.2/1.6; SS: 0.8/0.9/1.0/1.2/1.6; Flux-cored: 0.6/0.8/0.9/1.0/1.2/1.6 - Protection class: IP23 - Insulation class: H - Dimensions (mm): 605x240x445 - Weight (kg): 31.5 - Power factor: 0.7 Includes cooler, trolley, torch, and ground cable. Set includes: 500F SYN power source, cooler, trolley, power supply box, MB 500 4m water-cooled torch, and ground cable. Net price: 9,500 Gross price: 11,685

Condition: used, functionality: fully functional, machine/vehicle number: 22129, fuel type: gas, Year of construction: 2013, operating pressure: 10 bar, Used steam boiler system with gas burner and economizer Boiler manufacturer: VKK Standard Kessel Type: 22129, 10 bar Year of construction: 2013 Steam capacity: 12,000 kg/hour Permissible working pressure: 10 bar CE 0045 Kodpfxjzk H Aqj Ahhedr Complete with fittings, Weishaupt burner G70/2A ZM-1LN, control panel with Siemens PLC, and economizer. Also includes 2 feed water pumps and various fittings, including an automatic blowdown valve based on conductivity, a manually operated bottom blowdown valve, and a sample cooler.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,862 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 96, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2023. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a table diameter of 800 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. • Control Unit: Heidenhain TNC 640 • NC Software: 340590 16 SP3 Hotfix4 • A-Axis Swivel Range: -120° to +120° • B-Axis Swivel Range: +110° / -110° • C-Axis Rotary Table: 360° Continuous Rotation • Table Diameter: 800 mm • Spindle Taper: HSK-A63 • Tool Holder: HSK-A63 • Air Through Spindle • Linear Measuring System: Heidenhain X, Y, Z • Rotary Measuring System: Heidenhain • Heidenhain DXF Import • Heidenhain OCM Option • Oil Cooling for 4th & 5th Axis • Spindle Cooler • Electrical Cabinet Air Cooling • Network Connection • USB Port • Collision Avoidance: POS DCM Collision Module • POS Kinematic Module incl. Reference Ball • Infrared Workpiece Measurement: 3D Probe • Tool Measurement: BLUM Laser Kdedpfezhu S Uox Ahhor • Workpiece Measurement Preparation • Rotary Viewing Window • Hinged Belt Chip Conveyor (Optional, Not Included) • Professional Chip Conveyor with 40 Bar Internal Coolant Supply • Coolant Pump (Head): M-Function Controlled • Coolant Flush Pump • Hand Wash Gun • Water Gun • Chip Flush System • Single Compressed Air Connection in Table Centre • Hydraulic Unit • Mobile Electronic Handwheel • Rated Power: 90 kVA • Rated Current: 125 A • Maximum Current: 200 A • Short-Circuit Rating: 25 kA • Power Supply: 400 V / 50 Hz • Spindle S1 Time: 1,861 h 59 min 58 s • Single-Shift Operation Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. Kodpfevptt Rox Ahhodr It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: good (used), Year of construction: 2021, Hyfra Gamma 13 Active Immersion Cooler, Year 2021, Immersion coolers are designed for the cooling of water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and suitable for integration into various machine layouts. A stirrer ensures uniform medium temperature in the Gamma immersion cooler model. Easy cleaning is facilitated by crane eyes on the cooling unit. The HYFRA Gamma series models are designed as immersion coolers for cooling water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and can be used with a footprint of just 0.5 m². This makes them ideal for integration into different machine layouts. Thanks to their compact design, cooling capacities of up to 28 kW are possible with only 0.5 m² of floor space. This results in significant flexibility advantages in production floor planning and a marked increase in productivity, as more machines can be accommodated. In the compact models of our immersion coolers, the condenser is installed horizontally. Due to this design, the coolers generate considerably less waste heat. Internal components remain unaffected by residual heat. A robust stirrer ensures uniform medium temperature in the lubricant tank in all immersion cooler models of the series. The HYFRA Gamma series can be easily removed from the tank for regular cleaning using the fixed crane eyes. Immersion Coolers: High-Performance Cooling Directly at the Application Site How does an immersion cooler work? In immersion coolers, the evaporator is immersed directly into the cooling medium. The liquid is held in a tank and is agitated vigorously and continuously for efficient cooling. Powerful stirrers support this process. Kedpfxsyfutzs Ahhodr What are immersion coolers used for? Immersion coolers are commonly used for temperature control of coolant lubricants in filtration and mechanical engineering to ensure the performance of connected equipment. They are also used in metalworking for indirect cooling of tools and workpieces. Typical applications include CNC and conventional machine tools for milling and grinding. Immersion coolers with modern controls and extensive features Depending on the required cooling capacity, HYFRA Gamma immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of FreeAdvanced control and a touch panel provides a structured overview and allows real-time monitoring of relevant parameters. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced controller also features a full-text display and supports Modbus-TCP.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: W000257776, type of input current: three-phase, type of cooling: water, welding current (min.): 20 A, welding current (max.): 400 A, Oerlikon Citopuls MXW 420 MIG/MAG welding machine with water cooling – 400 A For sale is a used Oerlikon Citopuls MXW 420 MIG/MAG welding machine from the production stock of Syntegon Technology GmbH. The machine was used in its own production and is being sold due to a production and inventory consolidation, as it is no longer needed. The machine is functional and has been regularly inspected. The annual safety inspection certificate is available. This powerful industrial machine is particularly suitable for demanding MIG/MAG welding applications in the fields of mechanical engineering, metal construction, maintenance, and manufacturing. The water cooling ensures reliable operation even at higher welding currents. Kdjdezlrwcopfx Ahhor Technical data: Manufacturer: Oerlikon Model: Citopuls MXW 420 Year of manufacture: 2007 Serial number: W000257776 Welding current range: 20 – 400 A Power connection: 400 V Welding process: MIG/MAG [Machines_...likon 2134 | Excel] Water cooling with existing water cooler Welding torch included Condition: Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection possible by prior appointment. Loading upon agreement. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser source with KLH cooler The Trumpf TruDisk 4002 laser source is an industrial disc laser from TRUMPF, characterized by high power, beam quality, and efficiency. It is often used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of laser source with associated cooler, but without optics and fiber optic cable. Technical data Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm·mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10 % ... 460 V +10 %, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical characteristics: Water-water cooling Precise temperature control (typically 20–25 °C) Refrigerant: R 404A Can be controlled via TRUMPF interface Necessary to meet laser specifications Device type W20.HL29 Kdjdpfx Ahoziivkjhor Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), GA (W) VSDs (Variable Speed Drive) are single-stage, oil-injected, electric motor-driven, stationary screw compressors. Ksdpfx Aowxwxzshhedr The cooling system is equipped with an air cooler and an oil cooler. GA VSD are air-cooled compressors; cooling air is provided by a fan. Main features: - Maximum air inlet temperature: 40°C. - Maximum cooling water outlet temperature: 50°C - Temperature of the air leaving the outlet valve approx.: 30°C - Approximate oil capacity: 17.9 L

Year of construction: 2013, condition: excellent (used), 4 units in stock. Water-cooled enclosure cooler. Manufacturer: PFANNENBERG, Type: PWS 7412, Year of manufacture: 2013. Kjdpfxsiicp Ej Ahhjdr Price is per unit.

Condition: excellent (used), Year of construction: 2023, Immersion cooler Deltatherm E 4 Suitable for cooling: oil – emulsion – water Kdsdpfxox Rrn Is Ahhjr Temperature range: 10–40 °C Several units available

Year of construction: 2016, condition: used, No. 10010 Screening machine Doppstadt SM 620 K Used, year of construction 2016 (overhauled by the manufacturer in 2024) Mobile drum screen on chains Can be used for humus / soil, wood, waste, compost, light building rubble, etc. 7500 working hours Crawler chassis incl. 2 driving speeds Track width 500 mm Deutz TCD3.6 L4 diesel engine, 90 kW at 1600 rpm (meets EUROMOT IIIB/Tier 4i emission standard) Auxiliary pump drive for connecting additional hydraulic equipment Ksdev Eyqbopfx Ahhjdr Reversible fan on water and oil coolers Complete engine unit swivels out Fuel tank 300 litres 5 m3 hopper capacity Hydraulically folding side belt, belt length 5000 mm, belt width 1000 mm Hydraulically folding rear belt, belt length 5000 mm, belt width 1000 mm Emergency stop switch on side and rear belt Load-sensing material feed from the conveyor floor to the screen drum Infinitely variable screening drum speed from 0 - 18 rpm Infinitely variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear belt / Fold in & out side belt / Bend side belt Hydraulically folding cleaning brush with individual brush elements and spring tines Central lubrication bars 24 V electrical control Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, holder for transmitter (The following functions can be controlled: Engine stop, engine speed +/-, fold rear conveyor in & out, fold side conveyor in & out, move & steer machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Hydraulic quick hitch between rear conveyor and machine Acoustic start-up warning Doppstadt Telematic system Paint finish: RAL2011 deep orange Additional hydraulic connection 40 l/min at the rear of the machine Magnetic roller for rear conveyor Flow divider on rear conveyor Internal toothed hopper belt drive Screening drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset perforation)) Transport dimensions approx. 10550 x 3000 x 3690 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location